Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1608.06923 · Applied Physics Letters

An integrated mirror and surface ion trap with a tunable trap location

Andre Van Rynbach, Peter Maunz, Jungsang Kim

Published Nov 28, 2016• 20 citations
arXivHTMLPDF

Abstract

We report a demonstration of a surface ion trap fabricated directly on a highly reflective mirror surface, which includes a secondary set of radio frequency (RF) electrodes allowing for translation of the quadrupole RF null location. We introduce a position-dependent photon scattering rate for a 174Yb+ ion in the direction perpendicular to the trap surface using a standing wave of retroreflected light off the mirror surface directly below the trap. Using this setup, we demonstrate the capability of fine-tuning the RF trap location with nanometer scale precision and characterize the charging effects of the dielectric mirror surface upon exposure to ultra-violet light.

DOI
10.1063/1.4970542

Related papers

Design of a novel monolithic parabolic-mirror ion-trap to precisely align the RF null point with the optical focus

Zhao Wang, Ben-Ran Wang, Qinglin Ma +6 more

We propose a novel ion trap design with the high collection efficiency parabolic-mirror integrated with the ion trap electrodes. This design has three radio frequency (RF) electrodes and eight direct current(DC) compensation electrodes. By carefully adjusting three RF voltages, the parabolic mirror focus can be made precisely coincident with the RF null point. Thus, the aberration and the ion micromotion can be minimized at the same time. This monolithic design can significantly improve the ion-ion entanglement generation speed by extending the photon collecting solid angle beyond $90\%\cdot4π$. Further analysis of the trapping setup shows that the RF voltage variation method relexes machining accuracy to a broad range. This design is expected to be a robust scheme for trapping ion to speed entanglement network node.

arXiv:2004.08845•Apr 19, 2020•6 citations

Microfabricated surface ion trap on a high-finesse optical mirror

Peter F. Herskind, Shannon X. Wang, Molu Shi +3 more

A novel approach to optics integration in ion traps is demonstrated based on a surface electrode ion trap that is microfabricated on top of a dielectric mirror. Additional optical losses due to fabrication are found to be as low as 80 ppm for light at 422 nm. The integrated mirror is used to demonstrate light collection from, and imaging of, a single Sr88(+) ion trapped 169±4 μm above the mirror.

arXiv:1011.5259•Optics Letters•Aug 5, 2011•26 citations

Comparative numerical studies of ion traps with integrated optical cavities

Nina Podoliak, Hiroki Takahashi, Matthias Keller +1 more

We study a range of radio-frequency ion trap geometries and investigate the effect of integrating dielectric cavity mirrors on their trapping potential using numerical modelling. We compare five different ion trap geometries with the aim to identify ion trap and cavity configurations that are best suited for achieving small cavity volumes and thus large ion-photon coupling as required for scalable quantum information networks. In particular, we investigate the trapping potential distortions caused by the dielectric material of the cavity mirrors in all 3 dimensions for different mirror orientations with respect to the trapping electrodes. We also analyze the effect of the mirror material properties such as dielectric constants and surface conductivity, and study the effect of surface charges on the mirrors. As well as perfectly symmetric systems, we also consider traps with optical cavities that are not centrally aligned where we find a spatial displacement of the trap centre and asymmetry of the resulting trap only at certain cavity orientations. The best trapcavity configurations with the smallest trapping potential distortions are those where the cavities are aligned along the major symmetry axis of the electrode geometries. These cavity configurations also appear to be the most stable with respect to any mirror misalignment. Although we consider particular trap sizes in our study, the presented results can be easily generalized and scaled to different trap dimensions.

•Oct 17, 2016•11 citations

Surface trap with dc-tunable ion-electrode distance

Da An, Clemens Matthiesen, Ahmed Abdelrahman +5 more

We describe the design, fabrication, and operation of a novel surface-electrode Paul trap that produces a radio-frequency-null along the axis perpendicular to the trap surface. This arrangement enables control of the vertical trapping potential and consequentially the ion-electrode distance via dc-electrodes only. We demonstrate the confinement of single 40Ca+ ions at heights between 50 μm and 300 μm above planar copper-coated aluminum electrodes. Laser-cooling and coherent operations are performed on both the planar and vertical motional modes. This architecture provides a platform for precision electric-field noise detection and trapping of vertical ion strings without excess micromotion and may have applications for scalable quantum computers with surface ion traps.

arXiv:1807.06043•Review of Scientific Instruments•Sep 1, 2018•13 citations

Design of a surface electrode trap for parallel ion strings

U. Tanaka, Kensuke Suzuki, Y. Ibaraki +1 more

We report a linear surface-electrode trap that can be used to form parallel ion strings. By adjusting the balance of the radio-frequency (RF) voltages applied to central and RF electrodes, the RF pseudopotential can be varied from single-well to double-well in the radial direction. Ions located on two parallel lines of the RF potential null are in principle free from excess micromotion if appropriate static voltages are applied. Calcium ions were trapped for the evaluation of the designed electrode. An ion string in the single-well potential and two ion strings in the double-well potential were observed by changing the RF voltages. Such traps could be used for quantum simulation of coupled spin systems.

Journal of Physics B Atomic Molecular and Optical Physics•Jan 16, 2014•27 citations

Microfabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Van Rynbach, Jacques André

Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.

•Jan 1, 2016•0 citations
We report a demonstration of a surface ion trap fabricated directly on a highly reflective mirror surface, which includes a secondary set of radio frequency (RF) electrodes allowing for translation of the quadrupole RF null location. We introduce a position-dependent photon scattering rate for a 174Yb+ ion in the direction perpendicular to the trap surface using a standing wave of retroreflected light off the mirror surface directly below the trap. Using this setup, we demonstrate the capability of fine-tuning the RF trap location with nanometer scale precision and characterize the charging effects of the dielectric mirror surface upon exposure to ultra-violet light.
We propose a novel ion trap design with the high collection efficiency parabolic-mirror integrated with the ion trap electrodes. This design has three radio frequency (RF) electrodes and eight direct current(DC) compensation electrodes. By carefully adjusting three RF voltages, the parabolic mirror focus can be made precisely coincident with the RF null point. Thus, the aberration and the ion micromotion can be minimized at the same time. This monolithic design can significantly improve the ion-ion entanglement generation speed by extending the photon collecting solid angle beyond 90%⋅4π90\%\cdot4π90%⋅4π. Further analysis of the trapping setup shows that the RF voltage variation method relexes machining accuracy to a broad range. This design is expected to be a robust scheme for trapping ion to speed entanglement network node.
We study a range of radio-frequency ion trap geometries and investigate the effect of integrating dielectric cavity mirrors on their trapping potential using numerical modelling. We compare five different ion trap geometries with the aim to identify ion trap and cavity configurations that are best suited for achieving small cavity volumes and thus large ion-photon coupling as required for scalable quantum information networks. In particular, we investigate the trapping potential distortions caused by the dielectric material of the cavity mirrors in all 3 dimensions for different mirror orientations with respect to the trapping electrodes. We also analyze the effect of the mirror material properties such as dielectric constants and surface conductivity, and study the effect of surface charges on the mirrors. As well as perfectly symmetric systems, we also consider traps with optical cavities that are not centrally aligned where we find a spatial displacement of the trap centre and asymmetry of the resulting trap only at certain cavity orientations. The best trapcavity configurations with the smallest trapping potential distortions are those where the cavities are aligned along the major symmetry axis of the electrode geometries. These cavity configurations also appear to be the most stable with respect to any mirror misalignment. Although we consider particular trap sizes in our study, the presented results can be easily generalized and scaled to different trap dimensions.
We describe the design, fabrication, and operation of a novel surface-electrode Paul trap that produces a radio-frequency-null along the axis perpendicular to the trap surface. This arrangement enables control of the vertical trapping potential and consequentially the ion-electrode distance via dc-electrodes only. We demonstrate the confinement of single 40Ca+ ions at heights between 50 μm and 300 μm above planar copper-coated aluminum electrodes. Laser-cooling and coherent operations are performed on both the planar and vertical motional modes. This architecture provides a platform for precision electric-field noise detection and trapping of vertical ion strings without excess micromotion and may have applications for scalable quantum computers with surface ion traps.
We report a linear surface-electrode trap that can be used to form parallel ion strings. By adjusting the balance of the radio-frequency (RF) voltages applied to central and RF electrodes, the RF pseudopotential can be varied from single-well to double-well in the radial direction. Ions located on two parallel lines of the RF potential null are in principle free from excess micromotion if appropriate static voltages are applied. Calcium ions were trapped for the evaluation of the designed electrode. An ion string in the single-well potential and two ion strings in the double-well potential were observed by changing the RF voltages. Such traps could be used for quantum simulation of coupled spin systems.
Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.