Experimental Demonstration of a Resonator-Induced Phase Gate in a Multiqubit Circuit-QED System
Hanhee Paik, Antonio Mezzacapo, Martin Sandberg, Douglas McClure, Baleegh Abdo, Antonio D. Corcoles, Oliver Dial, Daniela F. Bogorin, B. L. T. Plourde, Matthias Steffen, Andrew W. Cross, Jay Gambetta, Jerry M. Chow
The resonator-induced phase (RIP) gate is an all-microwave multiqubit entangling gate that allows a high degree of flexibility in qubit frequencies, making it attractive for quantum operations in large-scale architectures. We experimentally realize the RIP gate with four superconducting qubits in a three-dimensional circuit-QED architecture, demonstrating high-fidelity controlled-z (cz) gates between all possible pairs of qubits from two different 4-qubit devices in pair subspaces. These qubits are arranged within a wide range of frequency detunings, up to as large as 1.8 GHz. We further show a dynamical multiqubit refocusing scheme in order to isolate out 2-qubit interactions, and combine them to generate a 4-qubit Greenberger-Horne-Zeilinger state.
The resonator-induced phase (RIP) gate is an all-microwave multiqubit entangling gate that allows a high degree of flexibility in qubit frequencies, making it attractive for quantum operations in large-scale architectures. We experimentally realize the RIP gate with four superconducting qubits in a three-dimensional circuit-QED architecture, demonstrating high-fidelity controlled-z (cz) gates between all possible pairs of qubits from two different 4-qubit devices in pair subspaces. These qubits are arranged within a wide range of frequency detunings, up to as large as 1.8 GHz. We further show a dynamical multiqubit refocusing scheme in order to isolate out 2-qubit interactions, and combine them to generate a 4-qubit Greenberger-Horne-Zeilinger state.
A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9 (99.99) fidelity in about 17ns (23ns) with a realistic two-parameter pulse profile, plus two auxiliary z rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a 99.9 cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.
Here, we report the experimental demonstration of a novel multi-mode linear bus interferometer (LBI) coupler in a six qubit superconducting quantum processor. A key feature of this coupler is an engineered multi-path interference which eliminates transverse coupling between qubits over a wide frequency range. This negligible static coupling is achieved without any flux bias tuning, and greatly reduces the impact of qubit frequency collisions. We achieve good simultaneous single qubit gate operation and low ZZ rates (below 600 Hz) across the device without staggering qubit frequencies, even in cases where qubits are as close as 10 MHz. Multi-qubit interactions are still possible through the coupler using microwave-driven resonator induced phase gates, which we utilize to demonstrate simultaneous two qubit gates with fidelities as high as 99.4%
In the circuit quantum electrodynamics architecture, both the resonance frequency and the coupling of superconducting qubits to microwave field modes can be controlled via external electric and magnetic fields to explore qubit-photon dynamics in a wide parameter range. Here, we experimentally demonstrate and analyze a scheme for tuning the coupling between a transmon qubit and a microwave resonator using a single coherent drive tone. We treat the transmon as a three-level system, with the qubit subspace defined by the ground and the second excited states. If the drive frequency matches the difference between the resonator and the qubit frequencies, a Jaynes-Cummings-type interaction is induced, which is tunable in both amplitude and phase. We show that coupling strengths of about 10 MHz can be achieved in our setup, limited only by the anharmonicity of the transmon qubit. This scheme has been successfully used to generate microwave photons with a controlled temporal shape [M. Pechal et al., Phys. Rev. X 4, 041010 (2014)] and can be directly implemented with superconducting quantum devices featuring larger anharmonicity for higher coupling strengths.
Scalable superconducting quantum processors require balancing critical constraints in coherence, control complexity, and spectral crowding. Fixed-frequency architectures suppress flux noise and simplify control via all-microwave operations but remain limited by residual ZZ crosstalk. Here we propose a microwave-activated three-qubit gate protocol for fixed-frequency transmon qubits in the large-detuning regime (∣Δ∣≫g), leveraging the third-order nonlinear interaction to coherently exchange ∣001⟩↔∣110⟩ states. By incorporating a phase-compensated optimization protocol, numerical simulations demonstrate a high average gate fidelity exceeding 99.9%. Systematic error analysis identifies static long-range ZZ coupling as the dominant error source in multi-qubit systems, which can be suppressed via operations in the large-detuning regime (∼1 GHz). The protocol maintains process fidelities exceeding 98% under decoherence, while demonstrating intrinsic robustness to fabrication-induced parameter variations and compatibility with existing all-microwave two-qubit gate architectures. This hardware-efficient strategy advances scalable quantum computing systems by improving coherence properties, reducing spectral congestion, and expanding the experimental toolkit for error-resilient quantum operations in the noisy intermediate-scale quantum era.
Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.
We propose a scheme to realize a multiqubit tunable phase gate in a circuit QED setup where two resonators, each coupling with a qudit, are interconnected to a common qudit (d=4). In this proposal, only two levels of each qudit serve as the logical states and the other two levels are used for the gate realization. The proposal is efficient and simple because only a classical microwave pulse is needed, no matter how many qudits are involved, which significantly reduces experimental difficulty. In a nonresonant case, the tunable phase gate can be achieved readily, while under the resonant condition, a π-phase gate can be realized after a full cycle of Rabi oscillation where the gate speed is rather fast due to the resonant interaction. We have shown that the resulting effective dynamics allows for the creation of a high-fidelity phase gate. The influence of various decoherence processes such as the decay of the resonator mode and the relaxation of the qudits is investigated. Moreover, the proposed scheme can be easily generalized to realize an N-qubit phase gate.