Quantum computing has enormous potential, but this can only be realised if quantum errors can be controlled sufficiently to allow quantum algorithms to be completed reliably. However, quantum-error-corrected logical quantum bits (qubits) which can be said to have achieved meaningful error suppression have not yet been demonstrated. This thesis reports research on several topics related to the challenge of designing fault-tolerant quantum computers. The first topic is a proposal for achieving large-scale error correction with the surface code in a silicon donor based quantum computing architecture. This proposal relaxes some of the stringent requirements in donor placement precision set by previous ideas from the single atom level to the order of 10 nm in some regimes. This is shown by means of numerical simulation of the surface code threshold. The second topic then follows, it is the development of a method for benchmarking and assessing the performance of small error correcting codes in few-qubit systems, introducing a metric called 'integrity' - closely linked to the trace distance -- and a proposal for experiments to demonstrate various stepping stones on the way to 'strictly superior' quantum error correction. Most quantum error correcting codes, including the surface code, do not allow for fault-tolerant universal computation without the addition of extra gadgets. One method of achieving universality is through a process of distilling and then consuming high quality 'magic states'. This process adds additional overhead to quantum computation over and above that incurred by the use of the base level quantum error correction. The latter parts of this thesis report an investigation into how many physical qubits are needed in a `magic state factory' within a surface code quantum computer and introduce a number of techniques to reduce the overhead of leading magic state techniques. It is found that universal quantum computing is achievable with ∼ 16 million qubits if error rates across a device are kept below 10-4. In addition, the thesis introduces improved methods of achieving magic state distillation for unconventional magic states that allow for logical small angle rotations, and show that this can be more efficient than synthesising these operations from the gates provided by traditional magic states.
Magic-state preparation is a central component of fault-tolerant quantum computing. Recent theoretical and experimental successes in code-switch-based magic-state preparation have underscored the promise of these methods for quantum error correction. Similarly, magic-state cultivation has likewise been demonstrated in both numerical and experimental settings. However, a thorough comparison between magic-state cultivation and code-switch-based magic-state factories is still missing. In this work, we carry out end-to-end simulations of magic-state preparation using code switching and compare its resource requirements and performance against magic-state cultivation. As part of this analysis, we develop a lattice-surgery protocol for transfer between the doubled color code and the rotated surface code. We extend the complete code-switching protocol to the
d=5 doubled color code and perform the corresponding end-to-end simulations. Finally, we propose two fault-tolerant magic-state preparation protocols that combine phase-kickback checks with a transversal non-Clifford gate.
Fault-tolerant quantum computation relies on the assumption of time-invariant, sufficiently low physical error rates. However, current superconducting quantum computers suffer from frequent disruptive noise events, including cosmic ray impacts and shifting two-level system defects. Several methods have been proposed to mitigate these issues in software, but they add large overheads in terms of physical qubit count, as it is difficult to preserve logical information through burst error events. We focus on mitigating multi-qubit burst errors in magic state factories, which are expected to comprise up to 95 % of the space cost of future quantum programs. Our key insight is that magic state factories do not need to preserve logical information over time; once we detect an increase in local physical error rates, we can simply turn off parts of the factory that are affected, re-map the factory to the new chip geometry, and continue operating. This is much more efficient than previous more general methods, and is resilient even under many simultaneous impact events. Using precise physical noise models, we show an efficient ray detection method and evaluate our strategy in different noise regimes. Compared to existing baselines, we find reductions in ray-induced overheads by several orders of magnitude, reducing total qubitcycle cost by geomean 6.5 x to 13.9 x depending on the noise model. This work reduces the burden on hardware by providing low-overhead software mitigation of these errors.
Abstract Error-corrected quantum computers limited to small code distances trade physical qubits against the number of logical operations they can run. Two tools set that trade-off in the early fault-tolerant era: logical-level error mitigation, which cancels residual logical errors at a sampling cost exponential in the total error, and magic-state cultivation, which prepares non-Clifford resource states far more cheaply than distillation. Their resource estimates use different accountings of time, idle error, and consumption, so their combination has not been costed consistently. Here we build one cost model in which data block, factory, and sampling overhead share one clock and precision target, and show that whether cultivation pays is decided by two architectural numbers: the
T-state demand per time step,
ρ=nLufT, which sets the factory area, and the exposure
N/u, which sets the idle error, where
u is the fraction of the
nL logical qubits acted on per step and
fT the
T fraction. At
ρ≈1 adding cultivation to error mitigation saves
6--
9% of physical qubits; at
ρ≈30 it saves
71--
85% because factories dominate the footprint. The feasible circuit size grows by at most
1.8--
2.7× and never reaches
1010 operations at
d≤13. We also identify a storage-limited error floor for 15-to-1 distillation confined to patch distance
dX≤11 (
3.7×10−6 at error rate
10−3), compute the exact floor of the
d1=3 cultivation stage (
6.8×10−7), show that escaping to
d2=7--
11 costs
25--
56% of the published volume, and find that the error of a cultivated state given its decoder gap follows one curve per
d1 to within
2×. On reported logical error suppression factors, today's hardware supports only tens of mitigated logical operations; the regime opens below a physical error rate of
2×10−3.
We propose a novel technique for optimizing a modular fault-tolerant quantum computing architecture, taking into account any desired space-time trade-offs between the number of physical qubits and the fault-tolerant execution time of a quantum algorithm. We consider a concept architecture comprising a dedicated zone as a multi-level magic state factory and a core processor for efficient logical operations, forming a supply chain network for production and consumption of magic states. Using a heuristic algorithm, we solve the multi-objective optimization problem of minimizing space and time subject to a user-defined error budget for the success of the computation, taking the performance of various fault-tolerant protocols into account. As an application, we show that physical quantum resource estimation reduces to a simple model involving a small number of key parameters, namely, the circuit volume, the error prefactors (
μ) and error suppression rates (
Λ) of the fault-tolerant protocols, the reaction time (
γ), and an allowed slowdown factor (
β).
Magic-state distillation is a major resource cost in fault-tolerant quantum computing. The cost of a magic-state factory depends strongly on its failure rate, which grows with the number of input magic states. Although symmetry-restricted methods have recently made distance two searches tractable, distance three and above have remained elusive at moderate input counts. We develop symmetry- and AI-assisted methods to search this regime. We present a unified binary-matrix formulation encompassing both triorthogonal-code and direct circuit searches. We show that distance at least three is equivalent to nonzero, pairwise distinct syndromes, separating the choice of syndromes from the search for compatible output gates. We restrict the syndrome search using group symmetry and language-model agents, followed by deterministic solving and independent verification. Our searches yield 699 factory classes, including 564 new ones. These include factories for pure-T states and factories with entangled outputs comprising combinations of T, CS, and CCZ magic states. The pure-T factories [[63, 11, 3]] and [[850, 128, 6]] achieve the lowest overhead exponents we know among protocols with at most 100 and 1000 inputs, respectively, with
γ=1.589 and
γ=1.057. Our [[1715, 287, 6]] factory, with
γ=0.998, is the smallest known pure-T factory with
γ<1. We also provide a context directory of search briefs and campaign notes with which readers can train their own agents and tailor the search to their requirements. With these results, we begin constructing an active, open-source repository of magic-state distillation protocols for the quantum community, supplemented by our methods and data, for the practical fault-tolerant quantum computing regime.