Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1602.02141 · Physical Review Letters

Complex Squeezing and Force Measurement Beyond the Standard Quantum Limit

Lukas F. Buchmann, Sydney Schreppler, Jonathan Kohler, Nicolas Spethmann, Dan Stamper-Kurn

Published Jul 12, 2016• 72 citations
arXivHTMLPDF

Abstract

A continuous quantum field, such as a propagating beam of light, may be characterized by a squeezing spectrum that is inhomogeneous in frequency. We point out that homodyne detectors, which are commonly employed to detect quantum squeezing, are blind to squeezing spectra in which the correlation between amplitude and phase fluctuations is complex. We find theoretically that such complex squeezing is a component of ponderomotive squeezing of light through cavity optomechanics. We propose a detection scheme called synodyne detection, which reveals complex squeezing and allows the accounting of measurement backaction. Even with the optomechanical system subject to continuous measurement, such detection allows the measurement of one component of an external force with sensitivity only limited by the mechanical oscillator's thermal occupation.

DOI
10.1103/physrevlett.117.030801

Related papers

Revealing Hidden Quantum Correlations in an Electromechanical Measurement

Caspar F. Ockeloen-Korppi, Erno Damskägg, Gheorghe Sorin Paraoanu +2 more

Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement backaction, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the backaction is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of the oscillator. Following the photons leaving the cavity, the correlations appear as squeezing of quantum noise in the emitted field. Here we observe such "ponderomotive" squeezing in the microwave domain using an electromechanical device made out of a superconducting resonator and a drumhead mechanical oscillator. Under a strong measurement, the emitted field develops complex-valued quantum correlations, which in general are not completely accessible by standard homodyne measurements. We recover these hidden correlations, using a phase-sensitive measurement scheme employing two local oscillators. The utilization of hidden correlations presents a step forward in the detection of weak forces, as it allows us to fully utilize the quantum noise reduction under the conditions of strong force sensitivity.

arXiv:1809.02396•Physical Review Letters•Dec 14, 2018•28 citations

Squeezing enhanced homodyne weak force sensing in cavity optomechanics

Madan Mohan Mahana, Sanket Das, Tarak Nath Dey

Cavity optomechanical systems have emerged as a promising platform for quantum sensing. Quantum mechanics imposes a standard quantum limit (SQL) on the force-sensitivity for the standard homodyne phase quadrature measurement of the cavity's output field. In this paper, we investigate ways to enhance weak force sensitivity beyond SQL by employing a variational homodyne quadrature readout and quantum squeezing. Our study reveals a remarkable improvement in the force sensitivity of a cavity optomechanical sensor at a suitable homodyne angle, compared with standard phase quadrature detection of the cavity output field within a specific frequency band. We further demonstrate improved force sensitivity via intra-cavity squeezing (ICS) or injected external squeezing (IES) of the cavity mode. Both variational homodyne readout and quantum squeezing induce quantum correlations between the amplitude and phase quadratures of the cavity's output field, thereby improving force sensitivity. Our results suggest that IES is preferable to ICS for sub-SQL force sensing with system stability and lower probe power requirements. The squeezing-enhanced variational homodyne detection scheme can enable high-precision quantum sensing across various hybrid quantum platforms.

quant-pharXiv:2606.28007•Jun 29, 2026•0 citations

Quantum Measurement with Atomic Cavity Optomechanics

Sydney Schreppler

A cloud of ultracold atoms trapped within the confines of a high-finesse optical cavity shakes from the pressure of the light that probes it. This form of measurement backaction, a central component of quantum measurement theory, is the subject of this dissertation. Enlisting the collective motion of ultracold atoms as the mechanical degree of freedom in a cavity optomechanical system, we reach settings cold and quiet enough to allow for the effects of measurement backaction to manifest. We report predictions for and experimental observa- tions of the Standard Quantum Limit for force sensitivity, optical ponderomotive squeezing, and the possibility of complex squeezing through generalized optical correlations.

Bulletin of the American Physical Society•Jan 1, 2016•0 citations

Squeezed-light-driven force detection with an optomechanical cavity in a Mach–Zehnder interferometer

Chang‐Woo Lee, Jae Hoon Lee, Hyojun Seok

We analyze the performance of a force detector based on balanced measurements with a Mach-Zehnder interferometer incorporating a standard optomechanical cavity. The system is driven by a coherent superposition of coherent light and squeezed vacuum field, providing quantum correlation along with optical coherence in order to enhance the measurement sensitivity beyond the standard quantum limit. We analytically find the optimal measurement strength, squeezing direction, and squeezing strength at which the symmetrized power spectral density for the measurement noise is minimized below the standard quantum limit. This force detection scheme based on a balanced Mach-Zehnder interferometer provides better sensitivity compared to that based on balanced homodyne detection with a local oscillator in the low frequency regime.

Scientific Reports•Oct 15, 2020•11 citations

Force measurement in squeezed dissipative optomechanics in the presence of laser phase noise

Wen-ju Gu, Yueyuan Wang, Zhen Yi +2 more

We investigate the force measurement sensitivity in a squeezed dissipative optomechanics within the free-mass regime under the influence of shot noise (SN) from the photon number fluctuations, laser phase noise from the pump laser, thermal noise from the environment, and optical losses from outcoupling and detection inefficiencies. Generally, squeezed light could generate a reduced SN on the squeezed quadrature and an enlarged quantum backaction noise (QBA) due to the antisqueezed conjugate quadrature. With an appropriate choice of phase angle in homodyne detection, QBA is cancellable, leading to an exponentially improved measurement sensitivity for the SN-dominated regime. By now, the effects of laser phase noise that is proportional to laser power emerge. The balance between squeezed SN and phase noise can lead to an sub-SQL sensitivity at an exponentially lower input power. However, the improvement by squeezing is limited by optical losses because high sensitivity is delicate and easily destroyed by optical losses.

Optics Express•Apr 6, 2020•9 citations

Quantum optomechanics at room temperature

H. Schütz

Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity $\sim\!10^4$ times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.

•Jan 1, 2017•0 citations
A continuous quantum field, such as a propagating beam of light, may be characterized by a squeezing spectrum that is inhomogeneous in frequency. We point out that homodyne detectors, which are commonly employed to detect quantum squeezing, are blind to squeezing spectra in which the correlation between amplitude and phase fluctuations is complex. We find theoretically that such complex squeezing is a component of ponderomotive squeezing of light through cavity optomechanics. We propose a detection scheme called synodyne detection, which reveals complex squeezing and allows the accounting of measurement backaction. Even with the optomechanical system subject to continuous measurement, such detection allows the measurement of one component of an external force with sensitivity only limited by the mechanical oscillator's thermal occupation.
Under a strong quantum measurement, the motion of an oscillator is disturbed by the measurement backaction, as required by the Heisenberg uncertainty principle. When a mechanical oscillator is continuously monitored via an electromagnetic cavity, as in a cavity optomechanical measurement, the backaction is manifest by the shot noise of incoming photons that becomes imprinted onto the motion of the oscillator. Following the photons leaving the cavity, the correlations appear as squeezing of quantum noise in the emitted field. Here we observe such "ponderomotive" squeezing in the microwave domain using an electromechanical device made out of a superconducting resonator and a drumhead mechanical oscillator. Under a strong measurement, the emitted field develops complex-valued quantum correlations, which in general are not completely accessible by standard homodyne measurements. We recover these hidden correlations, using a phase-sensitive measurement scheme employing two local oscillators. The utilization of hidden correlations presents a step forward in the detection of weak forces, as it allows us to fully utilize the quantum noise reduction under the conditions of strong force sensitivity.
Cavity optomechanical systems have emerged as a promising platform for quantum sensing. Quantum mechanics imposes a standard quantum limit (SQL) on the force-sensitivity for the standard homodyne phase quadrature measurement of the cavity's output field. In this paper, we investigate ways to enhance weak force sensitivity beyond SQL by employing a variational homodyne quadrature readout and quantum squeezing. Our study reveals a remarkable improvement in the force sensitivity of a cavity optomechanical sensor at a suitable homodyne angle, compared with standard phase quadrature detection of the cavity output field within a specific frequency band. We further demonstrate improved force sensitivity via intra-cavity squeezing (ICS) or injected external squeezing (IES) of the cavity mode. Both variational homodyne readout and quantum squeezing induce quantum correlations between the amplitude and phase quadratures of the cavity's output field, thereby improving force sensitivity. Our results suggest that IES is preferable to ICS for sub-SQL force sensing with system stability and lower probe power requirements. The squeezing-enhanced variational homodyne detection scheme can enable high-precision quantum sensing across various hybrid quantum platforms.
A cloud of ultracold atoms trapped within the confines of a high-finesse optical cavity shakes from the pressure of the light that probes it. This form of measurement backaction, a central component of quantum measurement theory, is the subject of this dissertation. Enlisting the collective motion of ultracold atoms as the mechanical degree of freedom in a cavity optomechanical system, we reach settings cold and quiet enough to allow for the effects of measurement backaction to manifest. We report predictions for and experimental observa- tions of the Standard Quantum Limit for force sensitivity, optical ponderomotive squeezing, and the possibility of complex squeezing through generalized optical correlations.
We analyze the performance of a force detector based on balanced measurements with a Mach-Zehnder interferometer incorporating a standard optomechanical cavity. The system is driven by a coherent superposition of coherent light and squeezed vacuum field, providing quantum correlation along with optical coherence in order to enhance the measurement sensitivity beyond the standard quantum limit. We analytically find the optimal measurement strength, squeezing direction, and squeezing strength at which the symmetrized power spectral density for the measurement noise is minimized below the standard quantum limit. This force detection scheme based on a balanced Mach-Zehnder interferometer provides better sensitivity compared to that based on balanced homodyne detection with a local oscillator in the low frequency regime.
We investigate the force measurement sensitivity in a squeezed dissipative optomechanics within the free-mass regime under the influence of shot noise (SN) from the photon number fluctuations, laser phase noise from the pump laser, thermal noise from the environment, and optical losses from outcoupling and detection inefficiencies. Generally, squeezed light could generate a reduced SN on the squeezed quadrature and an enlarged quantum backaction noise (QBA) due to the antisqueezed conjugate quadrature. With an appropriate choice of phase angle in homodyne detection, QBA is cancellable, leading to an exponentially improved measurement sensitivity for the SN-dominated regime. By now, the effects of laser phase noise that is proportional to laser power emerge. The balance between squeezed SN and phase noise can lead to an sub-SQL sensitivity at an exponentially lower input power. However, the improvement by squeezing is limited by optical losses because high sensitivity is delicate and easily destroyed by optical losses.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼ ⁣104\sim\!10^4∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.