Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1509.04208 · Journal of Physics B Atomic Molecular and Optical Physics

Simple and compact nozzle design for laser vaporization sources

Mark Kokish, Matthew Dietrich, Brian Odom

Published Jan 8, 2016• 0 citations
arXivHTMLPDF

Abstract

Abstract We have developed and implemented a compact transparent nozzle for use in laser vaporization sources. This nozzle eliminates the need for an ablation aperture, allowing for a more intense molecular beam. We use this nozzle to prepare a molecular beam of aluminum monohydride (AlH) suitable for ion trap loading of AlH + via photoionization in ultra-high vacuum. We demonstrate stable AlH production over hour time scales using a liquid ablation target. The long-term stability, low heat load and fast ion production rate of this source are well-suited to molecular ion experiments employing destructive state readout schemes requiring frequent trap reloading.

DOI
10.1088/0953-4075/49/3/035301

Related papers

Continuous thermochemical sources of AlF molecules

P. Kukreja, Priyansh Agarwal, Maximilian Doppelbauer +10 more

Abstract The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilizing this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5 × 10 15 molecules per steradian per second at 923 K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v = 0 , J = 7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionization spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30 K and reduce its most probable forward velocity from 600 m s − 1 to 200 m s − 1 . In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalize to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapor may enable direct loading of a molecular magneto-optical trap.

New Journal of Physics•May 19, 2026•0 citations

A free jet (supersonic), molecular beam source with automatized, 50 nm precision nozzle-skimmer positioning

Sabrina D. Eder, B. Samelin, G. Bracco +2 more

Low energy (thermal) free jet (supersonic) molecular beams are used in a range of applications from surface science and surface deposition to quantum coherence and gas kinetics experiments. A free jet molecular beam is created by a gas expansion from a high pressure reservoir through a small aperture (nozzle). The nozzle typically has a diameter of 2-20 μm. The central part of the beam is selected using a skimmer, typically up to 500 μm in diameter. Recent years have seen the introduction of highly spatially confined beam sources based on micrometer skimmers and micrometer or even sub-micrometer nozzles. Such sources have been applied, for example, in the investigation of superfluidity and in neutral helium microscopy. However, up till now no source design allowing the precise positioning of the micro-skimmer relative to the nozzle has been available. This is an important issue because the relative position of skimmer and nozzle can influence the beam properties considerably. Here we present the design and implementation of a new molecular beam source, which allows an automatized, 50 nm precision positioning of the skimmer relative to the nozzle. The source is liquid nitrogen cooled and the temperature can be controlled between 110 K and 350 K with a temperature fluctuation of less than ±0.1 K over several hours. Beam intensity measurements using a 5 μm nozzle and a skimmer 5 μm in diameter are presented for stagnation pressures po in the range 3-180 bars. A 2D beam profile scan, using a 9.5 μm skimmer and a 5 μm nozzle is presented as a further documentation of the versatility of the new design and as an illustration of the influence of the relative skimmer-nozzle position on the beam properties.

Review of Scientific Instruments•Sep 1, 2013•19 citations

Continuous thermochemical sources of AlF molecules

P. Kukreja, Priyansh Agarwal, Maximilian Doppelbauer +10 more

The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilising this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is $5\times 10^{15}$ molecules per steradian per second at 923~K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the $v=0$, $J=7$ level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionisation spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30~K and reduce its most probable forward velocity from 600~ms$^{-1}$ to 200~ms$^{-1}$. In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalise to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapour may enable direct loading of a molecular magneto-optical trap.

arXiv:2604.04509•Apr 6, 2026•0 citations

A simple nozzle design for high speed-ratio molecular beams

J. R. Buckland, Robert L. Folkerts, R. B. Balsod +1 more

A simple nozzle design for a free-jet atomic beam source is described. The design is compact (< 20 mm) and uses commercially available parts with only minor modification. Characterization of the source with a helium beam and time-of-flight detector showed that a velocity spread of less than 1% is readily obtained.

Measurement Science and Technology•Aug 1, 1997•20 citations

Compact strontium atom source using fiber-based pulsed laser ablation

Alto Osada, Ryo Tamaki, Wenbo Lin +2 more

We designed, demonstrated, and characterized a strontium atom source based on fiber-based pulsed laser ablation. By using a commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225 μ J delivered through a multimode fiber of 105 μm core, we ablate a SrTiO3 target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with a spectroscopic method and is revealed to exhibit the transverse temperature of 800 K and a longitudinal velocity of 2300 m/s, which are typical for a pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be 2×105. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote development of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences.

arXiv:2302.07639•Applied Physics Letters•May 1, 2023•1 citation

An optically heated atomic source for compact ion trap vacuum systems

Shaobo Gao, William J. Hughes, D. M. Lucas +2 more

We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.

arXiv:2010.15497•Review of Scientific Instruments•Mar 1, 2021•0 citations
Abstract We have developed and implemented a compact transparent nozzle for use in laser vaporization sources. This nozzle eliminates the need for an ablation aperture, allowing for a more intense molecular beam. We use this nozzle to prepare a molecular beam of aluminum monohydride (AlH) suitable for ion trap loading of AlH + via photoionization in ultra-high vacuum. We demonstrate stable AlH production over hour time scales using a liquid ablation target. The long-term stability, low heat load and fast ion production rate of this source are well-suited to molecular ion experiments employing destructive state readout schemes requiring frequent trap reloading.
Abstract The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilizing this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5 × 10 15 molecules per steradian per second at 923 K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v = 0 , J = 7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionization spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30 K and reduce its most probable forward velocity from 600 m s − 1 to 200 m s − 1 . In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalize to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapor may enable direct loading of a molecular magneto-optical trap.
Low energy (thermal) free jet (supersonic) molecular beams are used in a range of applications from surface science and surface deposition to quantum coherence and gas kinetics experiments. A free jet molecular beam is created by a gas expansion from a high pressure reservoir through a small aperture (nozzle). The nozzle typically has a diameter of 2-20 μm. The central part of the beam is selected using a skimmer, typically up to 500 μm in diameter. Recent years have seen the introduction of highly spatially confined beam sources based on micrometer skimmers and micrometer or even sub-micrometer nozzles. Such sources have been applied, for example, in the investigation of superfluidity and in neutral helium microscopy. However, up till now no source design allowing the precise positioning of the micro-skimmer relative to the nozzle has been available. This is an important issue because the relative position of skimmer and nozzle can influence the beam properties considerably. Here we present the design and implementation of a new molecular beam source, which allows an automatized, 50 nm precision positioning of the skimmer relative to the nozzle. The source is liquid nitrogen cooled and the temperature can be controlled between 110 K and 350 K with a temperature fluctuation of less than ±0.1 K over several hours. Beam intensity measurements using a 5 μm nozzle and a skimmer 5 μm in diameter are presented for stagnation pressures po in the range 3-180 bars. A 2D beam profile scan, using a 9.5 μm skimmer and a 5 μm nozzle is presented as a further documentation of the versatility of the new design and as an illustration of the influence of the relative skimmer-nozzle position on the beam properties.
The AlF molecule, currently subject to laser cooling and trapping efforts, has the advantage that it can be efficiently produced in a thermochemical reaction between sublimated aluminum trifluoride and aluminum metal. Here we present a series of experiments with continuous molecular beam sources of AlF, utilising this reaction. We demonstrate a compact AlF molecular beam oven whose total far-field brightness is 5×10155\times 10^{15}5×1015 molecules per steradian per second at 923~K, just below the melting temperature of aluminum metal. The continuous output from the oven begins to exceed the peak brightness of a jet-cooled, ablation-based supersonic AlF source for the v=0v=0v=0, J=7J=7J=7 level, and we obtain an excellent signal-to-noise ratio with the oven in pulsed laser ionisation spectroscopy experiments. By delivering flux from the oven into a cryogenic Ne buffer gas cell, we lower the rotational temperature of the beam to around 30~K and reduce its most probable forward velocity from 600~ms−1^{-1}−1 to 200~ms−1^{-1}−1. In addition, we demonstrate that AlF can be made in a simple dispenser package, and observe that molecules thermalise to the laboratory temperature after colliding with vacuum chamber walls of the experiment. The resulting transient AlF vapour may enable direct loading of a molecular magneto-optical trap.
We designed, demonstrated, and characterized a strontium atom source based on fiber-based pulsed laser ablation. By using a commercially available miniature lens system for focusing nanosecond pulsed laser of up to 225 μ J delivered through a multimode fiber of 105 μm core, we ablate a SrTiO3 target and generate a jet of neutral strontium atoms, though our method can be applied to other transparent ablation targets containing materials under concern. Our device endures 6000 cycles of pulse delivery and irradiation without noticeable damage on the fiber facets and lenses. The generated strontium beam is characterized with a spectroscopic method and is revealed to exhibit the transverse temperature of 800 K and a longitudinal velocity of 2300 m/s, which are typical for a pulsed-laser-ablation-based atom source. The number of atoms generated by a single ablation pulse is estimated to be 2×105. Our device provides a compact, cryo-compatible fiber-pigtailed atom source with minimized device footprints and reduced complexity of vacuum systems to further promote development of cold-atom experiments. It may also find interesting applications in atomic and molecular sciences.
We present a design for an atomic oven suitable for loading ion traps, which is operated via optical heating with a continuous-wave multimode diode laser. The absence of the low-resistance electrical connections necessary for Joule heating allows the oven to be extremely well thermally isolated from the rest of the vacuum system. Extrapolating from high-flux measurements of an oven filled with calcium, we calculate that a target region number density of 100 cm−3, suitable for rapid ion loading, will be produced with 175(10) mW of heating laser power, limited by radiative losses. With simple feedforward to the laser power, the turn-on time for the oven is 15 s. Our measurements indicate that an oven volume 1000 times smaller could still hold enough source metal for decades of continuous operation.