The atom sets an ultimate scaling limit to Moore's law in the electronics industry. While electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling, similar to electronics, is only limited by the atom. More precisely, we introduce an electrically controlled plasmonic switch operating at the atomic scale. The switch allows for fast and reproducible switching by means of the relocation of an individual or, at most, a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ratio of 9.2 dB and operation at room temperature up to MHz with femtojoule (fJ) power consumption for a single switch operation. This demonstration of an integrated quantum device allowing to control photons at the atomic level opens intriguing perspectives for a fully integrated and highly scalable chip platform, a platform where optics, electronics, and memory may be controlled at the single-atom level.
The atom sets an ultimate scaling limit to Moore's law in the electronics industry. While electronics research already explores atomic scales devices, photonics research still deals with devices at the micrometer scale. Here we demonstrate that photonic scaling, similar to electronics, is only limited by the atom. More precisely, we introduce an electrically controlled plasmonic switch operating at the atomic scale. The switch allows for fast and reproducible switching by means of the relocation of an individual or, at most, a few atoms in a plasmonic cavity. Depending on the location of the atom either of two distinct plasmonic cavity resonance states are supported. Experimental results show reversible digital optical switching with an extinction ratio of 9.2 dB and operation at room temperature up to MHz with femtojoule (fJ) power consumption for a single switch operation. This demonstration of an integrated quantum device allowing to control photons at the atomic level opens intriguing perspectives for a fully integrated and highly scalable chip platform, a platform where optics, electronics, and memory may be controlled at the single-atom level.
Underlying matter and light are their building blocks of tiny atoms and photons. The ability to control and utilize matter-light interactions down to the elementary single atom and photon level at the nano-scale opens up exciting studies at the frontiers of science with applications in medicine, energy, and information technology. Of these, an intriguing front is the development of quantum networks where N >> 1 single-atom nodes are coherently linked by single photons, forming a collective quantum entity potentially capable of performing quantum computations and simulations. Here, a promising approach is to use optical cavities within the setting of cavity quantum electrodynamics (QED). However, since its first realization in 1992 by Kimble et al., current proof-of-principle experiments have involved just one or two conventional cavities. To move beyond to N >> 1 nodes, in this thesis we investigate a platform born from the marriage of cavity QED and nanophotonics, where single atoms at ~100 nm near the surfaces of lithographically fabricated dielectric photonic devices can strongly interact with single photons, on a chip. Particularly, we experimentally investigate three main types of devices: microtoroidal optical cavities, optical nanofibers, and nanophotonic crystal based structures. With a microtoroidal cavity, we realized a robust and efficient photon router where single photons are extracted from an incident coherent state of light and redirected to a separate output with high efficiency. We achieved strong single atom-photon coupling with atoms located ~100 nm near the surface of a microtoroid, which revealed important aspects in the atom dynamics and QED of these systems including atom-surface interaction effects. We present a method to achieve state-insensitive atom trapping near optical nanofibers, critical in nanophotonic systems where electromagnetic fields are tightly confined. We developed a system that fabricates high quality nanofibers with high controllability, with which we experimentally demonstrate a state-insensitive atom trap. We present initial investigations on nanophotonic crystal based structures as a platform for strong atom-photon interactions. The experimental advances and theoretical investigations carried out in this thesis provide a framework for and open the door to strong single atom-photon interactions using nanophotonics for chip-integrated quantum networks.
Abstract The development of practical quantum networks and scalable photonic quantum information processing crucially depends on the ability to execute high-fidelity and coherent operations between photons of different wavelengths. While approaches based on quantum interference can implement many quantum operations, they are inherently limited to identical photons and thus are insufficient for the frequency-matching requirements of heterogeneous quantum systems. Rydberg atomic systems provide a powerful platform for achieving strong photon–photon nonlinearities capable of overcoming this limitation. Here, we report a heterogeneous single-photon switch and transistor based on Rydberg atoms, where a single gate photon at 795 nm controls the transmission of subsequent target photons at 780 nm. Our devices achieve a post-selected extinction ratio of ϵ = 0.09(3) for the switch, alongside a transistor gain of G = 26(2) achieved by leveraging a Förster-resonance-enhanced cross-state interaction. This work establishes a practical pathway towards building frequency-multiplexed quantum interfaces, a key component for interconnecting disparate physical platforms in future hybrid quantum networks.
The deterministic control of light-matter interactions at the level of single particles and on subwavelength scales is central to quantum optics and hybrid integrated quantum technologies. However, combining cold atom research with nanophotonic devices in a fully controllable platform remains a major experimental challenge. Here, we demonstrate the deterministic coupling of an ultracold atomic lattice to light propagating in suspended on-chip photonic circuits. These capabilities open avenues to address scalability challenges in neutral-atom quantum computers and simulators, enabling fast optical readout, efficient and subwavelength non-diffracting interaction zones, and genuine compatibility with integrated solid-state photon sources, detectors, and stop-band modulators. Beyond controllable quantum matter, the platform also enables in-situ imaging of evanescent fields of light and nanoscale structures, including prospects for three-dimensional scanning microscopy with non-invasive single-atom probes for quantum sensing applications.
Cavity quantum electrodynamics offers the possibility of observing and controlling the motion of a few or individual atoms, enabling the realization of various quantum technological tasks such as quantum enhanced metrology or quantum simulation of strongly correlated matter. A core limitation of these experiments lies in the mode structure of the cavity field, which is hard coded in the shape and geometry of the mirrors. As a result, most applications of cavity QED trade spatial resolution for enhanced sensitivity. Here, we propose and demonstrate a cavity-microscope device capable of controlling in space and time the coupling between atoms and light in a single-mode high-finesse cavity, reaching a spatial resolution an order of magnitude lower than the cavity-mode waist. This is achieved through local Floquet engineering of the atomic level structure, imprinting a corresponding atom-field coupling. We illustrate this capability by engineering micrometer-scale coupling, using cavity-assisted atomic measurements and optimization. Our system forms an optical device with a single optical axis, has the same footprint and complexity as a standard Fabry-Perot cavity or confocal lens pair, and can be used for any atomic species. This technique opens a wide range of perspectives, from ultrafast cavity-enhanced midcircuit readout to the quantum simulation of fully connected models of quantum matter such as the Sachdev-Ye-Kitaev model. Published by the American Physical Society 2024
Quantum emitters coupled to nanophotonic structures are an excellent platform for controllable single-photon scattering. The tunable light-matter interaction enables the construction of a single-photon switch -- a device that can route a single photon from an input port to a selected output port. Such single-photon switching devices can be integrated into reconfigurable photonic circuits to actively control the photon propagation direction in a quantum network. Ideally, a single-photon switch should operate with high speed, efficiency, and fidelity, preserving the state of the input photon in the routing process. This review brings together key input-output methods from quantum optics, theoretical proposals of emitter-based single-photon routing mechanisms, and experimental demonstrations of single-photon switching devices across different physical platforms, including semiconductor quantum dots, neutral atoms, superconducting qubits, and color centers. We highlight the need for reporting the key figures of merit (speed/efficiency/fidelity) in future single-photon switch demonstrations to support further developments in the field.
Advances in laser technology have driven discoveries in atomic, molecular, and optical (AMO) physics and emerging applications, from quantum computers with cold atoms or ions, to quantum networks with solid-state color centers. This progress is motivating the development of a new generation of "programmable optical control" systems, characterized by criteria (C1) visible (VIS) and near-infrared (IR) wavelength operation, (C2) large channel counts extensible beyond 1000s of individually addressable atoms, (C3) high intensity modulation extinction and (C4) repeatability compatible with low gate errors, and (C5) fast switching times. Here, we address these challenges by introducing an atom control architecture based on VIS-IR photonic integrated circuit (PIC) technology. Based on a complementary metal-oxide-semiconductor (CMOS) fabrication process, this Atom-control PIC (APIC) technology meets the system requirements (C1)-(C5). As a proof of concept, we demonstrate a 16-channel silicon nitride based APIC with (5.8$\pm$0.4) ns response times and -30 dB extinction ratio at a wavelength of 780 nm. This work demonstrates the suitability of PIC technology for quantum control, opening a path towards scalable quantum information processing based on optically-programmable atomic systems.