Efficient operation sequences to couple and interchange quantum information between quantum dot spin qubits of different kinds are derived using exchange interactions. In the qubit encoding of a single-spin qubit, a singlet-triplet qubit, and an exchange-only (triple-dot) qubit, some of the single-qubit interactions remain on during the entangling operation; this greatly simplifies the operation sequences that construct entangling operations. In the ideal setup, the gate operations use the intraqubit exchange interactions only once, and entangling operations with gate times similar to typical single-qubit operations are constructed. The limitations of the entangling sequences are discussed, and it is shown how quantum information can be converted between different kinds of quantum dot spin qubits. These gate sequences are useful for large-scale quantum computation because they show that different kinds of coded spin qubits can be combined easily, permitting the favorable physical properties of each to be employed.
Efficient operation sequences to couple and interchange quantum information between quantum dot spin qubits of different kinds are derived using exchange interactions. In the qubit encoding of a single-spin qubit, a singlet-triplet qubit, and an exchange-only (triple-dot) qubit, some of the single-qubit interactions remain on during the entangling operation; this greatly simplifies the operation sequences that construct entangling operations. In the ideal setup, the gate operations use the intraqubit exchange interactions only once, and entangling operations with gate times similar to typical single-qubit operations are constructed. The limitations of the entangling sequences are discussed, and it is shown how quantum information can be converted between different kinds of quantum dot spin qubits. These gate sequences are useful for large-scale quantum computation because they show that different kinds of coded spin qubits can be combined easily, permitting the favorable physical properties of each to be employed.
A two-level quantum system is the building block of a quantum computer. This pair of quantum states defines the computational unit of a quantum computer, and it is called a quantum bit or qubit in analogy to the bit that is the binary unit of a classical computer. The spin of a single electron naturally defines such a two-level quantum system. A quantum dot can be tuned to the single-electron regime, and an array of singly occupied quantum dots provides a multi-qubit register. This thesis describes the multielectron encoding of a spin qubit using a pair or a trio of quantum dots, and it analyzes the coherence properties and manipulation protocols of this system. The singlet-triplet qubit, coded using the singlet state and the spinless triplet state of a pair of singly occupied quantum dots, can be controlled all electrically when applying voltages to gates close to the quantum dot structure. Rapid, subnanosecond modifications of the double quantum dot's charge configuration have been realized successfully. A small magnetic field gradient across the double quantum dot enables universal qubit control. Two modifications of the normal singlet-triplet encoding are introduced. (1) The six-electron configuration of a double quantum dot encodes a singlet-triplet qubit in the same way as for the two-electron double quantum dot. Two electrons at each quantum dot are irrelevant for the qubit manipulations because they are paired in a singlet state; the remaining two electrons encode the qubit. The qubit's wave function is immune to charge noise at moderate out-of-plane magnetic fields. (2) A singlet-triplet qubit encoded using two quantum dots of different sizes has an orbital state degeneracy of the singlet state and the spinless triplet state at finite out-of-plane magnetic fields. Spin-orbit interactions lift this state degeneracy, while the magnitude of the state coupling is determined by the size difference of the QDs. This setup enables the manipulations of singlet-triplet qubits without the need for magnetic field gradients. Finally, two-qubit gates between singlet-triplet qubits are proposed that use mediated exchange interactions via one quantum state. These operations are well controlled and highly noise insensitive. Orbital interactions alone can control spin qubits coded in a three electron Hilbert space. For example, the exchange-only qubit is encoded using three singly occupied quantum dots. The exchange interactions of two quantum dot pairs need to be modified to manipulate this qubit. The noise sensitivity of the exchange-only qubit is discussed. Alternatively, a three-electron qubit at a double quantum dot can be operated when single electrons are transferred between the quantum dots. Fast, subnanosecond manipulations of the double quantum dot's charge configuration are required to realize single-qubit gates. A novel two-qubit pulse gate for the three-electron double quantum dot qubit is proposed.
We describe high-fidelity entangling gates between singlet-triplet qubits (STQs) which are coupled via one quantum state (QS). The QS can be provided by a quantum dot itself or by another confined system. The orbital energies of the QS are tunable using an electric gate close to the QS, which changes the interactions between the STQs independent of their single-qubit parameters. Short gating sequences exist for controlled not (cnot) operations. We show that realistic quantum dot setups permit excellent entangling operations with gate infidelities below ${10}^{\ensuremath{-}3}$, which is lower than the quantum error correction threshold of the surface code. We consider limitations from fabrication errors, hyperfine interactions, spin-orbit interactions, and charge noise in GaAs and Si heterostructures.
We study controllable exchange coupling between two singlet-triplet qubits. We start from the original second quantized Hamiltonian of a quadruple quantum dot system and obtain the effective spin-spin interaction between the two qubits using the projection operator method. Under a strong uniform external magnetic field and an inhomogeneous local micromagnetic field, the effective interqubit coupling is of the Ising type, and the coupling strength can be expressed in terms of quantum dot parameters. Finally, we discuss how to generate various two-qubit operations using this controllable coupling, such as entanglement generation, and a controlled-not gate.
A constructive scheme has been devised to enable mapping of any quantum computation into a spintronic circuit in which the computation is encoded in a basis that is, in principle, immune to quantum decoherence. The scheme is implemented by an algorithm that utilizes multiple physical spins to encode each logical bit in such a way that collective errors affecting all the physical spins do not disturb the logical bit. The scheme is expected to be of use to experimenters working on spintronic implementations of quantum logic. Spintronic computing devices use quantum-mechanical spins (typically, electron spins) to encode logical bits. Bits thus encoded (denoted qubits) are potentially susceptible to errors caused by noise and decoherence. The traditional model of quantum computation is based partly on the assumption that each qubit is implemented by use of a single two-state quantum system, such as an electron or other spin-1.2 particle. It can be surprisingly difficult to achieve certain gate operations . most notably, those of arbitrary 1-qubit gates . in spintronic hardware according to this model. However, ironically, certain 2-qubit interactions (in particular, spin-spin exchange interactions) can be achieved relatively easily in spintronic hardware. Therefore, it would be fortunate if it were possible to implement any 1-qubit gate by use of a spin-spin exchange interaction. While such a direct representation is not possible, it is possible to achieve an arbitrary 1-qubit gate indirectly by means of a sequence of four spin-spin exchange interactions, which could be implemented by use of four exchange gates. Accordingly, the present scheme provides for mapping any 1-qubit gate in the logical basis into an equivalent sequence of at most four spin-spin exchange interactions in the physical (encoded) basis. The complexity of the mathematical derivation of the scheme from basic quantum principles precludes a description within this article; it must suffice to report that the derivation provides explicit constructions for finding the exchange couplings in the physical basis needed to implement any arbitrary 1-qubit gate. These constructions lead to spintronic encodings of quantum logic that are more efficient than those of a previously published scheme that utilizes a universal but fixed set of gates.
This thesis addresses the concept of quantum computing with semiconductor quantum dots. The basic unit of a quantum computer is a quantum mechanical two-level system, the so-called quantum bit (qubit). The qubit can be defined as the spin of an electron confined in a quantum dot or as a two-dimensional subspace of the Hilbert space for several spins. Some semiconductors have several minima in their conduction band, socalled valleys. A two-dimensional valley degree of freedom can also be considered as a qubit. In this thesis, quantum registers storing spin as well as valley qubits are described theoretically. Virtual hopping yields an exchange interaction between neighboring quantum dots, which reduces the energy of antisymmetric spin-valley states according to the Pauli principle. Considering the spin and the valley degrees of freedom of two electrons in neighboring quantum dots as qubits, the exchange interaction is a four-qubit interaction. In this thesis, it will be shown that it is, nevertheless, possible to generate a universal two-qubit gate for spin qubits or for valley qubits by combining the exchange interaction and individual single-qubit gates. The exchange interaction in this two-electron double quantum dot directly provides a universal two-qubit gate for one spin and one valley qubit as well. For this, the qubits are defined as suitable subspaces, spanned by the singlet and one triplet state of the spin and the valley states, respectively, Using those gates, arbitrary quantum operations can be performed for single-spin and single-valley qubits in the same quantum register, where in one double quantum dot the quantum states are restricted to the singlet-triplet subspace. While in this register single-spin and single-valley rotations are required, these gates are dispensable in a quantum register storing spin and valley singlet-triplet qubits. The single-qubit operations, in this case, can be provided by the exchange interaction and a gradient in the energy splitting of spin and valley states when the spin qubit is stored in a double quantum dot with spin degrees of freedom only and when the spin states in the double quantum dot which stores the valley qubit are polarized. For providing the two-qubit gate, the spin and the valley qubits need to be stored in the same double quantum dot. The crucial task for this register is to interchange the spin of a spin-only and a spin-valley quantum dot in order to switch between the single-qubit and the two-qubit operation mode. This interchanging of the spin can be achieved by a valley-depending virtual hopping between the quantum dots. Furthermore, echo sequences for a so-called exchange-only qubit are considered. An exchange-only qubit is defined as a subspace in a system of three electron spins in a triple quantum dot. An inhomogeneous magnetic field, which may be caused by nuclear spins in the semiconductor, can lead to decoherence and leakage, i.e., the state might leave the qubit subspace. Suppressing this effect by an echo sequence which consists of pulses interchanging neighboring spin states, so-called SWAP gates, was proposed. Controllability over these quantum operations is provided via the exchange interaction. In this thesis, the performance of different such sequences is investigated. The analysis shows that optimization strategies developed for single spin echoes can be adapted for the three spin system. The echo sequences can be different in their order of applied SWAP gates interchanging the spins in the first and second dots or in the second and third dots. The noise suppression performance depends slightly on this order of SWAP gates. For two spins in a double quantum dot a scheme for quantum state tomography is presented. The corresponding measurement operators are constructed from a set of mutually unbiased bases of the four-dimensional two-qubit Hilbert space. These measurements are represented by short sequences of no more than three elementary quantum gates and projective measurements by the well-established spin-to-charge conversion.
The benefit of exchange-only qubits compared to other spin-qubit types is the universal control using only voltage-controlled exchange interactions between neighboring spins. As a compromise, qubit operations have to be constructed from nonorthogonal rotation axes of the Bloch sphere and result in rather long pulsing sequences. This paper aims to develop a faster implementation of single-qubit gates using simultaneous exchange pulses and manifests their potential for the construction of two-qubit gates. We introduce pulse sequences in which single-qubit gates could be executed faster and show that subsequences on three spins in two-qubit gates could be implemented in fewer steps. Our findings can particularly speed up gate sequences for realistic idle times between sequential pulses and we show that this advantage increases with more interconnectivity of the quantum dots. We further demonstrate how a phase operation can introduce a relative phase between the computational and some of the leakage states, which can be advantageous for the construction of two-qubit gates. In addition to our theoretical analysis, we experimentally demonstrate and characterize a simultaneous exchange implementation of X rotations in a Si Ge quantum dot device and compare to the state of the art with sequential exchange pulses.