We propose a superconducting circuit comprising a dc superconducting quantum interference device with a mechanically compliant arm embedded in a coplanar microwave cavity that realizes an optomechanical system with a degenerate or nondegenerate parametric interaction generated via the dynamical Casimir effect. For experimentally feasible parameters, this setup is capable of reaching the single-photon ultrastrong-coupling regime while simultaneously possessing a parametric coupling strength approaching the renormalized cavity frequency. This opens up the possibility of observing the interplay between these two fundamental nonlinearities at the single-photon level.
We propose a superconducting circuit comprising a dc superconducting quantum interference device with a mechanically compliant arm embedded in a coplanar microwave cavity that realizes an optomechanical system with a degenerate or nondegenerate parametric interaction generated via the dynamical Casimir effect. For experimentally feasible parameters, this setup is capable of reaching the single-photon ultrastrong-coupling regime while simultaneously possessing a parametric coupling strength approaching the renormalized cavity frequency. This opens up the possibility of observing the interplay between these two fundamental nonlinearities at the single-photon level.
We propose an experimentally feasible optomechanical system (OMS) that is dispersively driven and operates in the reversed dissipation regime (RDR), where the mechanical damping rate far exceeds the cavity decay rate. We demonstrate that coherent, fast-time modulation of the driving laser frequency on time scales longer than the mechanical decoherence time allows for adiabatic elimination of the mechanical mode, resulting in strong parametric amplification of quantum vacuum fluctuations of the intracavity field. This mechanism, known as the parametric dynamical Casimir effect (parametric-DCE), leads to the generation of Casimir photons. In the dispersive RDR, we find that the total system Hamiltonian-including the DCE term-is intrinsically modified by a generalized optomechanical Kerr-type nonlinearity. This nonlinearity not only saturates the mean number of radiated Casimir photons on short time scales, even without dissipation, but also induces oscillatory behavior in their dynamics and quantum characteristics. Remarkably, the presence of the Kerr nonlinearity causes the generated DCE photons to exhibit nonclassical features, including simultaneous sub-Poissonian statistics and negative Wigner function, as well as quadrature squeezing, which can be controlled by adjusting the system parameters. Surprisingly, the controllable simultaneous nonclassical dynamics in the same physical parameter regime, which is induced by the optomechanical Kerr nonlinearity to the parametric DCE cannot occur in the standard DCE or Kerr-type systems. The proposed nonclassical microwave radiation source possesses the potential to be applied in quantum information processing, quantum computing as well as microwave quantum sensing.
We present a new optomechanical device where the motion of a micromechanical membrane couples to a microwave resonance of a three-dimensional superconducting cavity. With this architecture, we realize ultrastrong parametric coupling, where the coupling not only exceeds the dissipation in the system but also rivals the mechanical frequency itself. In this regime, the optomechanical interaction induces a frequency splitting between the hybridized normal modes that reaches 88% of the bare mechanical frequency, limited by the fundamental parametric instability. The coupling also exceeds the mechanical thermal decoherence rate, enabling new applications in ultrafast quantum state transfer and entanglement generation.
We theoretically investigate the dynamical Casimir effect (DCE) in electrical circuits based on superconducting microfabricated waveguides with tunable boundary conditions. We propose implementing a rapid modulation of the boundary conditions by tuning the applied magnetic flux through superconducting quantum-interference devices that are embedded in the waveguide circuits. We consider two circuits: (i) An open waveguide circuit that corresponds to a single mirror in free space, and (ii) a resonator coupled to a microfabricated waveguide, which corresponds to a single-sided cavity in free space. We analyze the properties of the DCE in these two setups by calculating the generated photon-flux densities, output-field correlation functions, and the quadrature squeezing spectra. We show that these properties of the output field exhibit signatures unique to the radiation due to the DCE, and could, therefore, be used for distinguishing the DCE from other types of radiation in these circuits. We also discuss the similarities and differences between the DCE, in the resonator setup, and the down-conversion of pump photons in parametric oscillators.
This thesis explores the coupling of microwave cavities containing a Superconducting QUantum Interference Device (SQUID) to a mechanical resonator by means of a flux-mediated optomechanical coupling scheme, and to a Radio-Frequency (RF) circuit via a photon-pressure interaction. While flux-mediated optomechanical systems open the door for the exploration of optomechanical single-photon effects, ultimately allowing for the generation of non-classical states in mechanical oscillators and for the creation of optomechanical qubits, the realization of photon-pressure systems brings rich possibilities for quantum-limited sensing and quantum signal processing, representing a first step towards radio-frequency quantum photonics. Besides presenting the experimental work done with the systems described above, this thesis also provides a theoretical description of their working principle, details on their fabrication, and insights on maximizing their single-photon coupling strengths as well as an overview of the experimental challenges associated with SQUID cavities.
We propose and analyze a circuit that implements a nonlinear coupling between two superconducting microwave resonators. The resonators are coupled through a superconducting quantum interference device that terminates one of the resonators. This produces a nonlinear interaction of the standard optomechanical form, where the quadrature of one resonator couples to the photon number of the other resonator. The circuit therefore allows for all-electrical realizations of analogs to optomechanical systems, with coupling that can be both strong and tunable. We estimate the coupling strengths that should be attainable with the proposed device, and we find that the device is a promising candidate for realizing the single-photon strong-coupling regime. As a potential application, we discuss implementations of networks of nonlinearly coupled microwave resonators, which could be used in microwave-photon-based quantum simulation.
The field of optomechanics has emerged as leading platform for achieving quantum control of macroscopic mechanical objects. Implementations of microwave optomechanics to date have coupled microwave photons to mechanical resonators using a moving capacitance. While simple and effective, the capacitive scheme suffers from limitations on the maximum achievable coupling strength. Here, we experimentally implement a fundamentally different approach: flux-mediated optomechanical coupling. In this scheme, mechanical displacements modulate the flux in a superconducting quantum interference device (SQUID) that forms the inductor of a microwave resonant circuit. We demonstrate that this flux-mediated coupling can be tuned in situ by the magnetic flux in the SQUID, enabling nanosecond flux tuning of the optomechanical coupling. Furthermore, we observe linear scaling of the single-photon coupling rate with the in-plane magnetic transduction field, a trend with the potential to overcome the limits of capacitive optomechanics, opening the door for a new generation of groundbreaking optomechanical experiments.