The biexciton cascade process in self-assembled quantum dots (QDs) provides an ideal system for realizing deterministic entangled photon-pair sources, which are essential to quantum information science. The entangled photon pairs have recently been generated in experiments after eliminating the fine-structure splitting (FSS) of excitons using a number of different methods. Thus far, however, QD-based sources of entangled photons have not been scalable because the wavelengths of QDs differ from dot to dot. Here, we propose a wavelength-tunable entangled photon emitter mounted on a three-dimensional stressor, in which the FSS and exciton energy can be tuned independently, thereby enabling photon entanglement between dissimilar QDs. We confirm these results via atomistic pseudopotential calculations. This provides a first step towards future realization of scalable entangled photon generators for quantum information applications.
The biexciton cascade process in self-assembled quantum dots (QDs) provides an ideal system for realizing deterministic entangled photon-pair sources, which are essential to quantum information science. The entangled photon pairs have recently been generated in experiments after eliminating the fine-structure splitting (FSS) of excitons using a number of different methods. Thus far, however, QD-based sources of entangled photons have not been scalable because the wavelengths of QDs differ from dot to dot. Here, we propose a wavelength-tunable entangled photon emitter mounted on a three-dimensional stressor, in which the FSS and exciton energy can be tuned independently, thereby enabling photon entanglement between dissimilar QDs. We confirm these results via atomistic pseudopotential calculations. This provides a first step towards future realization of scalable entangled photon generators for quantum information applications.
Self-assembled quantum dots (QDs) offer versatile sources of quantum light for photonic quantum technologies thanks to their atomic-like discrete energy levels for deterministic generation of single photons. Though, the unavoidable inhomogeneous broadening and the ubiquitous presence of the fine structure splitting (FSS) of the exciton states hamper their use as high-fidelity entangled-photon sources (EPSs) with well-defined energies, core elements in scalable networking quantum applications. To overcome these challenges, in this work, we propose and demonstrate a photolithographically fabricated microelectromechanical system (MEMS) to dynamically control the optical properties of QDs. The device features two orthogonal and independent uniaxial stresses that can tune the exciton energy and the FSS simultaneously, enabling demonstration of energy-tunable EPSs based on self-assembled QDs. The device can be processed by only employing standard photolithography techniques, which alleviates the use of sophisticated device design and fabrications, thus providing a viable route toward the realization of entanglement swapping with all-solid-state quantum emitters.
The biexciton-exciton cascade in quantum dots (QDs) yields entangled photon pairs, and recent developments in engineering photonic structures around the dot for efficient light extraction and proper control of the fine-structure splitting, has led to significant breakthroughs in achieving an ideal entangled photon source -- exhibiting properties such as high extraction efficiency, low multi-photon emission and high entanglement fidelity. This thesis presents our development in enhancing the performance of entangled photon generation of QDs towards near-unity efficiency and fidelity. We study InAsP quantum dots in photonic nanowires for efficient light extraction and to reveal the effect of a quantum dot with high nuclear spin on the entanglement fidelity. \n \nRevealing the ultimate limit of entanglement in QDs is still a challenge, and it is generally believed that a sample made of atoms possessing high nuclear spins exhibits limited entanglement due to the dephasing caused by spin-spin interactions. Moreover, it is assumed that the fine-structure splitting of QDs degrades the entanglement fidelity, as it introduces a which-path information in the biexciton-exciton cascade. We have performed two-photon state tomography on InAsP QDs in InP nanowires, comprising of nuclear spin 9/2, and have realized that such a source is capable of generating entangled photon pairs with negligible dephasing during the emission lifetime, with a peak concurrence C = 77% and a count-weighted average concurrence 62%. This result was obtained by comparing the outcome of our measurements with a theoretical model that assumes no dephasing, however, takes into account the details of the detection system, i.e., dark-count rates and timing resolution, as well as, specific features of the QD, e.g., emission lifetime, fine-structure splitting, multi-photon emission probability, etc. Proper engineering of tapered nanowires allows for extraction of the emitted photons with high efficiency, which makes it possible to perform a complete two-photon state tomography and monitoring the evolution of the exciton state, as well as, the entanglement fidelity of the photon-pair, during the emission lifetime. This enabled us to reveal the effect of an imperfect detection system, as well as, multi-photon emission in recording low values for entanglement fidelity. Moreover, our calculations show that proper analysis of the time-energy uncertainty relation provides the necessary means to measure a high entanglement fidelity even in the presence of fine-structure splitting; since, a detection system with high timing resolution can overlook the which-path information, as the uncertainty in measuring the energy of the photons will be larger than the fine-structure splitting. Therefore, realizing near-unity entanglement fidelity using QDs is merely a technical challenge, i.e., resonant excitation of the QD, in order to suppress multi-photon emission, and use of a detection system with low timing jitter and dark-count rates. \n \nAs a next step to achieve this goal, we have performed the resonant two-photon excitation scheme for the first time on a QD in a photonic nanowire, which resulted in an enhancement of the performance of our source. We managed to improve the single-photon purity of the source, g^(2)(0), by two orders of magnitude; moreover, analysis of the emission spectrum reveals that this scheme increases the pair-production efficiency to values above 93% for the biexciton-exciton cascade. Taking the efficiency of our experimental setup into consideration, the results indicate an approximately eight-fold enhancement of the pair-extraction efficiency as compared to the quasi-resonant excitation scheme (12.55% vs. 1.6%). Based on these results, two-photon state tomography on our source, under resonant two-photon excitation and performed by a detection system with high timing resolution and low dark-count rates, yields near-unity entanglement fidelity. By considering the enhancement in pair-extraction efficiency that we obtained, QDs in photonic nanowires can surpass the performance of spontaneous parametric down conversion sources in terms of entanglement fidelity and pair-extraction efficiency. \n \nEven though we have shown a finite fine-structure splitting does not degrade the entanglement fidelity in QDs, for various application in quantum information removing the fine-structure splitting is beneficial. Therefore, we have proposed a universal all-optical approach for removing the fine-structure splitting. In this scheme, the energy of the photons are shifted by using a pair of quarter-wave plates and fast-rotating half-wave plates after they have been emitted; and as a result, the energy difference between the two decay paths in the biexciton-exciton cascade is erased. This method is applicable to any QD source and can be easily implemented using the currently available technology; moreover, no further sample processing will be required in order to achieve zero fine-structure splitting.
The construction of a large-scale quantum internet requires quantum repeaters containing multiple entangled photon sources with identical wavelengths. Semiconductor quantum dots can generate entangled photon pairs deterministically with high fidelity. However, realizing wavelength-matched quantum-dot entangled photon sources faces two difficulties: the non-uniformity of emission wavelength and exciton fine-structure splitting induced fidelity reduction. Typically, these two factors are not independently tunable, making it challenging to achieve simultaneous improvement. In this work, we demonstrate wavelength-tunable entangled photon sources based on droplet-etched GaAs quantum dots through the combined use of AC and quantum-confined Stark effects. The emission wavelength can be tuned by ~1 meV while preserving an entanglement fidelity f exceeding 0.955(1) in the entire tuning range. Based on this hybrid tuning scheme, we finally demonstrate multiple wavelength-matched entangled photon sources with f > 0.919(3), paving the way towards robust and scalable on-demand entangled photon sources for quantum internet and integrated quantum optical circuits.
The implementation of fiber-based long-range quantum communication requires tunable sources of single photons at the telecom C-band. Stable and easy-to-implement wavelength-tunability of individual sources is crucial to (i) bring remote sources into resonance, (ii) define a wavelength standard, and (iii) ensure scalability to operate a quantum repeater. So far, the most promising sources for true, telecom single photons are semiconductor quantum dots, due to their ability to deterministically and reliably emit single and entangled photons. However, the required wavelength-tunability is hard to attain. Here, we show a stable wavelength-tunable quantum light source by integrating strain-released InAs quantum dots on piezoelectric substrates. We present triggered single-photon emission at 1.55 μm with a multi-photon emission probability as low as 0.097, as well as photon pair emission from the radiative biexciton–exciton cascade. We achieve a tuning range of 0.25 nm which will allow us to spectrally overlap remote quantum dots or tuning distant quantum dots into resonance with quantum memories. This opens up realistic avenues for the implementation of photonic quantum information processing applications at telecom wavelengths.
In recent years it has been realized that quantum entanglement could have many applications in the nascent field of quantum information technology [1]. While most existing sources for entangled photons rely on nonlinear optical effects [2], triggered entangled photons provide the benefit of being event-ready for application. The radiative decay of biexcitons in a quantum dot (QD) has been proposed [3] and recently demonstrated [4,5,6] as a source of triggered polarization-entangled photon pairs. However, in most cases the anisotropy-induced exciton fine structure splitting destroys this entanglement. The key to the generation of entangled photon pairs in a QD is therefore the suppression of the exciton polarization splitting. Seeded self-ordering, which involves the self-formation of nanostructures at nucleation sites introduced by a substrate patterning process [7], is particularly attractive because it allows for control over the size and shape of the QD. In particular, pyramidal QDs grown in this way on (111)B GaAs substrates have a higher symmetry (C3v) [8] as compared with self-assembled Stranski-Krastanow QDs (C2v). This feature makes them a prime candidate for efficient sources of entangled photons.
Semiconductor quantum dots (QDs) have emerged as a premier solid-state platform for the deterministic generation of nonclassical light, offering a compelling pathway toward scalable quantum photonic systems. While single-photon emission from QDs has reached a high level of maturity, the realization of high-fidelity entangled photon-pair sources remains an active and rapidly evolving frontier. In this review, we survey the recent progress in QD-based entangled photon sources, highlighting the conceptual evolution from the established biexciton-exciton cascade to the emerging paradigm of spontaneous two-photon emission. We further examine how advances in nanophotonic architectures and coherent control strategies are redefining fundamental performance limits, enabling concurrent improvements in source brightness, coherence, and entanglement fidelity. Finally, we discuss the key physical and technological challenges that must be addressed to bridge the gap between laboratory demonstrations and large-scale deployment. We conclude by outlining the future opportunities for integrating QD-based entangled photon sources into practical quantum communication, computation, and sensing platforms.