Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1410.8321 · Japanese Journal of Applied Physics

Relaxation of Cs atomic polarization at surface coatings characterized by X-ray photoelectron spectroscopy

Kotaro Kushida, Toshihiro Niwano, Takemasa Moriya, Tomohito Shimizu, Kazuki Meguro, Hideki Nakazawa, A. Hatakeyama

Published May 1, 2015• 3 citations
arXivHTMLPDF

Abstract

Abstract Paraffin coatings on glass slides were investigated through both X-ray photoelectron spectroscopy (XPS) and spin relaxation measurement for cesium (Cs) vapor. The components of the glass substrate, such as silicon and oxygen, existed in the XPS spectra of the coated slides, indicating the imperfection of the prepared paraffin coatings. The substrate was not observed after the annealing of the coatings in Cs vapor, which is known as a “ripening” process for spin relaxation measurement. We found a general trend that effective anti-spin relaxation performance requires high paraffin and low Cs coverage on the surface. We also examined a type of diamond-like carbon film, anticipating the effect of anti-spin relaxation; our attempts have failed to date.

DOI
10.7567/jjap.54.066401

Related papers

Experimental investigations of relaxation of spin polarized atoms on coated surfaces

Natarajan D. Bhaskar

The interaction of spin polarized cesium atoms on coated surfaces is examined. Coated surfaces find extensive applications in atomic devices-hydrogen masers and advanced rubidium frequency standards utilize wall coatings to obtain very narrow hyperfine resonances. A Cs atomic beam is hyperfine or spin polarized by optical pumping techniques using a single mode AlGaAs diode laser. The ground state distribution is probed before and after scattering from coated surfaces using laser induced fluorescence spectroscopy. The coatings under investigations are paraffin and organosilanes and these are known to be very weakly relaxing surfaces for polarized alkali atoms. The spin relaxation properties of paraffin and organosilane coatings have been studied in glass cell-vapor environment. In our experiments using polarized atomic beams, our goal is to examine in detail the hyperfine and spin relaxation properties of these coatings in a carefully controlled environment which is not possible in the gas cell environment. We measure the spin relaxation probability per wall collision as a function of temperature of the surface. Results of our studies will be presented.

Bulletin of the American Physical Society•May 1, 1993•0 citations

Potassium spin polarization lifetime for a 30-carbon chain siloxane film

Amber M. Hibberd, Susanna L. Bergman, Yu Lin Zhong +1 more

The siloxane film derived from the 30-carbon chain triacontyltrichlorosilane (TCTS) is studied as an anti-relaxation coating for atomic vapor cells. The longitudinal spin relaxation lifetime of optically pumped potassium atoms in the presence of TCTS is measured and the average number of non-relaxing atom-wall collisions, or bounces, enabled by the coated surface is determined. X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) of TCTS were performed to investigate changes in chemical states and surface morphology of TCTS arising from K atom deposition on the film surface. TCTS was found to give approximately 530 bounces. Following lifetime measurements, K2p signals were clearly observed in XPS spectra. AFM images display non-preferential K deposition on the TCTS surface, however additional AFM studies with a TCTS surface exposed to Rb atoms show deposition occurs along surface defects. In agreement, Rb is found to preferentially deposit along the step edges of an 18-carbon chain monolayer film derived from 1-Octadecene. Finally, AFM indicates a much smoother surface for a tetracontane coating relative to TCTS. The importance of siloxane surface morphology versus film thickness with respect to coating performance is discussed.

The Journal of Chemical Physics•Nov 2, 2012•10 citations

Investigation of antirelaxation coatings for alkali-metal vapor cells using surface science techniques

Scott J. Seltzer, David J. Michalak, Marcus H. Donaldson +17 more

Many technologies based on cells containing alkali-metal atomic vapor benefit from the use of antirelaxation surface coatings in order to preserve atomic spin polarization. In particular, paraffin has been used for this purpose for several decades and has been demonstrated to allow an atom to experience up to 10 000 collisions with the walls of its container without depolarizing, but the details of its operation remain poorly understood. We apply modern surface and bulk techniques to the study of paraffin coatings in order to characterize the properties that enable the effective preservation of alkali spin polarization. These methods include Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, near-edge x-ray absorption fine structure spectroscopy, and x-ray photoelectron spectroscopy. We also compare the light-induced atomic desorption yields of several different paraffin materials. Experimental results include the determination that crystallinity of the coating material is unnecessary, and the detection of C[Double Bond]C double bonds present within a particular class of effective paraffin coatings. Further study should lead to the development of more robust paraffin antirelaxation coatings, as well as the design and synthesis of new classes of coating materials.

arXiv:1002.4417•The Journal of Chemical Physics•Oct 11, 2010•63 citations

Relaxation of atomic polarization in paraffin-coated cesium vapor cells

M. T. Graf, Derek F. Jackson Kimball, Simon Rochester +6 more

The relaxation of atomic polarization in buffer-gas-free, paraffin-coated cesium vapor cells is studied using a variation on Franzen's technique of ``relaxation in the dark'' [Franzen, Phys. Rev. 115 850 (1959)]. In the present experiment, narrow-band, circularly polarized pump light, resonant with the Cs D2 transition, orients atoms along a longitudinal magnetic field, and time-dependent optical rotation of linearly polarized probe light is measured to determine the relaxation rates of the atomic orientation of a particular hyperfine level. The change in relaxation rates during light-induced atomic desorption (LIAD) is studied. No significant change in the spin relaxation rate during LIAD is found beyond that expected from the faster rate of spin-exchange collisions due to the increase in Cs density.

arXiv:physics/0503202•Physical Review A•Aug 1, 2005•140 citations

Light-induced desorption of alkali-metal atoms from paraffin coating

Evgeny B. Alexandrov, M. V. Balabas, Dmitry Budker +4 more

Observation of nonthermal, light-induced desorption of Cs and Rb atoms from paraffin coating is reported. Buffer-gas-free paraffin-coated cells containing Cs and Rb were exposed to laser light of various intensities and frequencies, and the change of the vapor densities as a function of time was investigated. Because atomic polarization relaxes very slowly in paraffin-coated cells (spin-relaxation times can be $\ensuremath{\gtrsim}1\mathrm{s}),$ they are applied in a variety of precision measurements (e.g., magnetometry, discrete symmetry tests, etc.). Light-induced desorption may be useful in such measurements as a method to control atomic density without changing the temperature of the cell.

Physical Review A•Oct 23, 2002•154 citations

Performance comparison of quantum memories in cesium vapor cells with anti-relaxation coatings

Chang-Hoon Park, Jing Su, Stanley Hsu +4 more

Atomic vapor-cell quantum memories are key devices for quantum information science. Anti-relaxation coatings on the inner surface of the cell suppress ground-state dephasing caused by atom-wall collisions, thereby improving memory performance. Nevertheless, systematic performance comparisons of vapor-cell quantum memories with different anti-relaxation coatings under identical conditions remain limited. Here, we experimentally compare quantum-memory performance in cesium vapor cells with and without anti-relaxation coatings-uncoated, paraffin-coated, and alkene-coated-under otherwise identical conditions to assess coating-dependent effects. Using electromagnetically induced transparency (EIT) as the light storage protocol, we characterize transmission, memory efficiency, and storage lifetime. The alkene-coated cell yields the largest enhancement in retrieval efficiency-more than fourfold relative to the uncoated cell and more than twofold relative to the paraffin-coated cell-while exhibiting a modest (approximately 16%) increase in storage lifetime. These results provide a systematic benchmark for evaluating anti-relaxation coatings and for this instance, identify alkene coatings as an effective choice for improving retrieval efficiency in warm-vapor-cell memories.

Optics Express•Oct 31, 2025•1 citation
Abstract Paraffin coatings on glass slides were investigated through both X-ray photoelectron spectroscopy (XPS) and spin relaxation measurement for cesium (Cs) vapor. The components of the glass substrate, such as silicon and oxygen, existed in the XPS spectra of the coated slides, indicating the imperfection of the prepared paraffin coatings. The substrate was not observed after the annealing of the coatings in Cs vapor, which is known as a “ripening” process for spin relaxation measurement. We found a general trend that effective anti-spin relaxation performance requires high paraffin and low Cs coverage on the surface. We also examined a type of diamond-like carbon film, anticipating the effect of anti-spin relaxation; our attempts have failed to date.
The interaction of spin polarized cesium atoms on coated surfaces is examined. Coated surfaces find extensive applications in atomic devices-hydrogen masers and advanced rubidium frequency standards utilize wall coatings to obtain very narrow hyperfine resonances. A Cs atomic beam is hyperfine or spin polarized by optical pumping techniques using a single mode AlGaAs diode laser. The ground state distribution is probed before and after scattering from coated surfaces using laser induced fluorescence spectroscopy. The coatings under investigations are paraffin and organosilanes and these are known to be very weakly relaxing surfaces for polarized alkali atoms. The spin relaxation properties of paraffin and organosilane coatings have been studied in glass cell-vapor environment. In our experiments using polarized atomic beams, our goal is to examine in detail the hyperfine and spin relaxation properties of these coatings in a carefully controlled environment which is not possible in the gas cell environment. We measure the spin relaxation probability per wall collision as a function of temperature of the surface. Results of our studies will be presented.
The siloxane film derived from the 30-carbon chain triacontyltrichlorosilane (TCTS) is studied as an anti-relaxation coating for atomic vapor cells. The longitudinal spin relaxation lifetime of optically pumped potassium atoms in the presence of TCTS is measured and the average number of non-relaxing atom-wall collisions, or bounces, enabled by the coated surface is determined. X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) of TCTS were performed to investigate changes in chemical states and surface morphology of TCTS arising from K atom deposition on the film surface. TCTS was found to give approximately 530 bounces. Following lifetime measurements, K2p signals were clearly observed in XPS spectra. AFM images display non-preferential K deposition on the TCTS surface, however additional AFM studies with a TCTS surface exposed to Rb atoms show deposition occurs along surface defects. In agreement, Rb is found to preferentially deposit along the step edges of an 18-carbon chain monolayer film derived from 1-Octadecene. Finally, AFM indicates a much smoother surface for a tetracontane coating relative to TCTS. The importance of siloxane surface morphology versus film thickness with respect to coating performance is discussed.
Many technologies based on cells containing alkali-metal atomic vapor benefit from the use of antirelaxation surface coatings in order to preserve atomic spin polarization. In particular, paraffin has been used for this purpose for several decades and has been demonstrated to allow an atom to experience up to 10 000 collisions with the walls of its container without depolarizing, but the details of its operation remain poorly understood. We apply modern surface and bulk techniques to the study of paraffin coatings in order to characterize the properties that enable the effective preservation of alkali spin polarization. These methods include Fourier transform infrared spectroscopy, differential scanning calorimetry, atomic force microscopy, near-edge x-ray absorption fine structure spectroscopy, and x-ray photoelectron spectroscopy. We also compare the light-induced atomic desorption yields of several different paraffin materials. Experimental results include the determination that crystallinity of the coating material is unnecessary, and the detection of C[Double Bond]C double bonds present within a particular class of effective paraffin coatings. Further study should lead to the development of more robust paraffin antirelaxation coatings, as well as the design and synthesis of new classes of coating materials.
The relaxation of atomic polarization in buffer-gas-free, paraffin-coated cesium vapor cells is studied using a variation on Franzen's technique of ``relaxation in the dark'' [Franzen, Phys. Rev. 115 850 (1959)]. In the present experiment, narrow-band, circularly polarized pump light, resonant with the Cs D2 transition, orients atoms along a longitudinal magnetic field, and time-dependent optical rotation of linearly polarized probe light is measured to determine the relaxation rates of the atomic orientation of a particular hyperfine level. The change in relaxation rates during light-induced atomic desorption (LIAD) is studied. No significant change in the spin relaxation rate during LIAD is found beyond that expected from the faster rate of spin-exchange collisions due to the increase in Cs density.
Observation of nonthermal, light-induced desorption of Cs and Rb atoms from paraffin coating is reported. Buffer-gas-free paraffin-coated cells containing Cs and Rb were exposed to laser light of various intensities and frequencies, and the change of the vapor densities as a function of time was investigated. Because atomic polarization relaxes very slowly in paraffin-coated cells (spin-relaxation times can be $\ensuremath{\gtrsim}1\mathrm{s}),$ they are applied in a variety of precision measurements (e.g., magnetometry, discrete symmetry tests, etc.). Light-induced desorption may be useful in such measurements as a method to control atomic density without changing the temperature of the cell.
Atomic vapor-cell quantum memories are key devices for quantum information science. Anti-relaxation coatings on the inner surface of the cell suppress ground-state dephasing caused by atom-wall collisions, thereby improving memory performance. Nevertheless, systematic performance comparisons of vapor-cell quantum memories with different anti-relaxation coatings under identical conditions remain limited. Here, we experimentally compare quantum-memory performance in cesium vapor cells with and without anti-relaxation coatings-uncoated, paraffin-coated, and alkene-coated-under otherwise identical conditions to assess coating-dependent effects. Using electromagnetically induced transparency (EIT) as the light storage protocol, we characterize transmission, memory efficiency, and storage lifetime. The alkene-coated cell yields the largest enhancement in retrieval efficiency-more than fourfold relative to the uncoated cell and more than twofold relative to the paraffin-coated cell-while exhibiting a modest (approximately 16%) increase in storage lifetime. These results provide a systematic benchmark for evaluating anti-relaxation coatings and for this instance, identify alkene coatings as an effective choice for improving retrieval efficiency in warm-vapor-cell memories.