Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.6031 · Physical Review Letters

Coherence and Decay of Higher Energy Levels of a Superconducting Transmon Qubit

Michael Peterer, Samuel James Bader, Xiaoyue Jin, Fei Yan, Archana Kamal, Theodore Gudmundsen, Peter Leek, Terry P. Orlando, William D. Oliver, Simon Gustavsson

Published Jan 6, 2015• 207 citations
arXivHTMLPDF

Abstract

We present measurements of coherence and successive decay dynamics of higher energy levels of a superconducting transmon qubit. By applying consecutive π pulses for each sequential transition frequency, we excite the qubit from the ground state up to its fourth excited level and characterize the decay and coherence of each state. We find the decay to proceed mainly sequentially, with relaxation times in excess of 20 μs for all transitions. We also provide a direct measurement of the charge dispersion of these levels by analyzing beating patterns in Ramsey fringes. The results demonstrate the feasibility of using higher levels in transmon qubits for encoding quantum information.

DOI
10.1103/physrevlett.114.010501

Related papers

Measuring coherent dynamics of a superconducting qubit in an open waveguide

A. Sh. Sultanov, E. Mutsenik, Matthias Schmelz +5 more

We measured the relaxation and decoherence rates of a superconducting transmon qubit in a resonator-free setting. In our experiments, the qubit is coupled to an open coplanar waveguide such that the transmission of microwaves through this line depends on the qubit's state. To determine the occupation of the first excited qubit energy level, we introduced a two-pulse technique. The first applied pulse, at a frequency close to the eigenfrequency of the qubit, serves to excite the qubit. A second pulse is then used for probing the transition between the first and second excited energy levels. Utilizing this measurement technique allowed for the reconstruction of the relaxation dynamics and Rabi oscillations. Furthermore, we demonstrate the consistency between the extracted parameters and the corresponding estimations from frequency-domain measurements.

arXiv:2504.11028•Applied Physics Letters•Jul 28, 2025•3 citations

Thermometry based on a superconducting qubit

Dmitry S. Lvov, S. A. Lemzyakov, Elias Ankerhold +2 more

We report temperature measurements using a transmon qubit by detecting the population of its first three energy levels after applying a sequence of π pulses and performing projective dispersive readout. We measure the effective temperature of the qubit and characterize its relaxation and coherence times τ 1 , τ 2 for three devices in the temperature range from 20 to 300 mK. We analyze the process of qubit thermalization to its effective environment consisting of multiple heat baths and support this with experimental data. The signal-to-noise ratio of the temperature measurement depends strongly on τ 1 , which drops at higher temperatures due to quasiparticle excitations, adversely affecting the measurements and setting an upper bound of the dynamic temperature range of the thermometer. The measurement relies on coherent dynamics of the qubit during the π pulses. The effective qubit temperature follows closely that of the cryostat in the range from 100 to 200 mK. We present a numerical model of the qubit population distribution and find hat it compares favorably with the experimental results. Finally, we compare our technique with previous work on qubit thermometry and discuss its application prospects.

arXiv:2409.02784•Physical Review Applied•May 28, 2025•15 citations

Experiments on multi-level superconducting qubits and coaxial circuit QED

Michael Peterer

Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.

•Jan 1, 2016•1 citation

Methods to achieve near-millisecond energy relaxation and dephasing times for a superconducting transmon qubit

Mikko Tuokkola, Yoshiki Sunada, Heidi Kivijärvi +6 more

Abstract Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time T 1 with a median of 425 μs and a maximum of (666 ± 33)μs, and an echo dephasing time $${T}_{2}^{{{{\rm{echo}}}}}$$ T 2 echo with a median of 541 μs and a maximum of (1057 ± 138)μs. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.

arXiv:2407.18778•Nature Communications•Jul 8, 2025•60 citations

Two-Level System Spectroscopy from Correlated Multilevel Relaxation in Superconducting Qubits

Tanay Roy, Xinyuan You, David van Zanten +5 more

Transmon qubits are a cornerstone of modern superconducting quantum computing platforms. Temporal fluctuations of energy relaxation in these qubits are widely attributed to microscopic two-level systems (TLSs) in device dielectrics and interfaces, yet isolating individual defects typically relies on tuning the qubit or the TLS into resonance. We demonstrate a novel spectroscopy method for fixed-frequency transmons based on multilevel relaxation: repeated preparation of the second excited state and simultaneous $T_1$ extraction of the first and second excited states reveals characteristic correlations in the decay rates of adjacent transitions. From these correlations we identify one or more dominant TLSs and reconstruct their frequency drift over time. Remarkably, we find that TLSs detuned by $\gtrsim 100\,\mathrm{MHz}$ from the qubit transition can still significantly influence relaxation. The proposed method provides a powerful tool for TLS spectroscopy without the need to tune the transmon frequency, either via a flux-tunable inductor or AC-Stark shifts.

quant-pharXiv:2602.11127•Feb 12, 2026•0 citations

Decoherence benchmarking of superconducting qubits

Jonathan Burnett, Andreas Bengtsson, Marco Scigliuzzo +4 more

Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters $$\overline {T_1}$$ T 1 ¯ = 49 μs and $$\overline {T_2^ \ast }$$ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.

arXiv:1901.04417•npj Quantum Information•Jun 26, 2019•381 citations
We present measurements of coherence and successive decay dynamics of higher energy levels of a superconducting transmon qubit. By applying consecutive π pulses for each sequential transition frequency, we excite the qubit from the ground state up to its fourth excited level and characterize the decay and coherence of each state. We find the decay to proceed mainly sequentially, with relaxation times in excess of 20 μs for all transitions. We also provide a direct measurement of the charge dispersion of these levels by analyzing beating patterns in Ramsey fringes. The results demonstrate the feasibility of using higher levels in transmon qubits for encoding quantum information.
We measured the relaxation and decoherence rates of a superconducting transmon qubit in a resonator-free setting. In our experiments, the qubit is coupled to an open coplanar waveguide such that the transmission of microwaves through this line depends on the qubit's state. To determine the occupation of the first excited qubit energy level, we introduced a two-pulse technique. The first applied pulse, at a frequency close to the eigenfrequency of the qubit, serves to excite the qubit. A second pulse is then used for probing the transition between the first and second excited energy levels. Utilizing this measurement technique allowed for the reconstruction of the relaxation dynamics and Rabi oscillations. Furthermore, we demonstrate the consistency between the extracted parameters and the corresponding estimations from frequency-domain measurements.
We report temperature measurements using a transmon qubit by detecting the population of its first three energy levels after applying a sequence of π pulses and performing projective dispersive readout. We measure the effective temperature of the qubit and characterize its relaxation and coherence times τ 1 , τ 2 for three devices in the temperature range from 20 to 300 mK. We analyze the process of qubit thermalization to its effective environment consisting of multiple heat baths and support this with experimental data. The signal-to-noise ratio of the temperature measurement depends strongly on τ 1 , which drops at higher temperatures due to quasiparticle excitations, adversely affecting the measurements and setting an upper bound of the dynamic temperature range of the thermometer. The measurement relies on coherent dynamics of the qubit during the π pulses. The effective qubit temperature follows closely that of the cryostat in the range from 100 to 200 mK. We present a numerical model of the qubit population distribution and find hat it compares favorably with the experimental results. Finally, we compare our technique with previous work on qubit thermometry and discuss its application prospects.
Superconducting qubits are a promising technology for building a scalable quantum computer. An important architecture employed in the field is called Circuit Quantum Electrodynamics (circuit QED), where such qubits are combined with high quality microwave cavities to study the interaction between artificial atoms and single microwave photons. The ultra-strong coupling achieved in these systems allows for control and readout of the quantum state of qubits to perform quantum information processing. The work on circuit QED performed in this thesis consisted of realizing an experimental setup for qubit experiments in a new laboratory, investigating the coherence and decay of higher energy levels of superconducting transmon qubits and finally demonstrating a novel coaxial form of circuit QED. Designing and building a 3D circuit QED setup involved the following main accomplishments: producing high quality 3D cavities; designing and installing the cryogenic microwave setup as well as the room temperature amplification and data acquisition circuitry; successfully developing a recipe for the fabrication of Josephson junctions; controlling and measuring superconducting 3D transmon qubits at 10mK. Several qubits were fully characterised and have shown coherence times of several microseconds and relaxation times up to 25μs. Superconducting qubits in fact possess higher energy levels that can provide significant computational advantages in quantum information applications. In experiments performed at MIT, preparation and control of the five lowest states of a transmon qubit was demonstrated, followed by an investigation of the phase coherence and decay dynamics of these higher energy levels. The decay was found to proceed mainly sequentially with relaxation times in excess of 20μs for all transitions. A direct measurement of the charge dispersion of these levels was performed to explore their characteristics of dephasing. This experiment was also reproduced on a 3D transmon fabricated and measured in Oxford, where due to a higher effective qubit temperature a multi-level decay model including thermal excitations was developed to explain the observed relaxation dynamics. Finally, a coaxial transmon, which we name the coaxmon, is presented and measured with a coaxial LC readout resonator and input/output coupling ports placed inline along the third dimension. This novel coaxial circuit QED architecture holds great promise for developing a scalable planar grid of qubits to build a quantum computer.
Abstract Superconducting qubits are one of the most promising physical systems for implementing quantum computers. However, executing quantum algorithms of practical computational advantage requires further improvements in the fidelities of qubit operations, which are currently limited by the energy relaxation and dephasing times of the qubits. Here, we report our measurement results of a high-coherence transmon qubit with energy relaxation and echo dephasing times surpassing those in the existing literature. We measure a qubit frequency of 2.9 GHz, an energy relaxation time T 1 with a median of 425 μs and a maximum of (666 ± 33)μs, and an echo dephasing time T2echo{T}_{2}^{{{{\rm{echo}}}}}T2echo​ T 2 echo with a median of 541 μs and a maximum of (1057 ± 138)μs. We report in detail our design, fabrication process, and measurement setup to facilitate the reproduction and wide adoption of high-coherence transmon qubits in the academia and industry.
Transmon qubits are a cornerstone of modern superconducting quantum computing platforms. Temporal fluctuations of energy relaxation in these qubits are widely attributed to microscopic two-level systems (TLSs) in device dielectrics and interfaces, yet isolating individual defects typically relies on tuning the qubit or the TLS into resonance. We demonstrate a novel spectroscopy method for fixed-frequency transmons based on multilevel relaxation: repeated preparation of the second excited state and simultaneous T1T_1T1​ extraction of the first and second excited states reveals characteristic correlations in the decay rates of adjacent transitions. From these correlations we identify one or more dominant TLSs and reconstruct their frequency drift over time. Remarkably, we find that TLSs detuned by ≳100 MHz\gtrsim 100\,\mathrm{MHz}≳100MHz from the qubit transition can still significantly influence relaxation. The proposed method provides a powerful tool for TLS spectroscopy without the need to tune the transmon frequency, either via a flux-tunable inductor or AC-Stark shifts.
Abstract We benchmark the decoherence of superconducting transmon qubits to examine the temporal stability of energy relaxation, dephasing, and qubit transition frequency. By collecting statistics during measurements spanning multiple days, we find the mean parameters T1‾\overline {T_1}T1​​ T 1 ¯ = 49 μs and T2∗‾\overline {T_2^ \ast }T2∗​​ T 2 * ¯ = 95 μs; however, both of these quantities fluctuate, explaining the need for frequent re-calibration in qubit setups. Our main finding is that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems (TLS). Through statistical analysis, we determine sub-millihertz switching rates of these TLS and observe the coherent coupling between an individual TLS and a transmon qubit. Finally, we find evidence that the qubit’s frequency stability produces a 0.8 ms limit on the pure dephasing which we also observe. These findings raise the need for performing qubit metrology to examine the reproducibility of qubit parameters, where these fluctuations could affect qubit gate fidelity.