Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1409.5647 · Physical Review A

Multiplexed readout of transmon qubits with Josephson bifurcation amplifiers

Vivien Schmitt, Xin Zhou, Kristinn Júlíusson, Baptiste Royer, Alexandre Blais, Patrice Bertet, D. Vion, D. Esteve

Published Dec 22, 2014• 33 citations
arXivHTMLPDF

Abstract

Achieving individual qubit readout is a major challenge in the development of scalable superconducting quantum processors. We have implemented the multiplexed readout of a four transmon qubit circuit using nonlinear resonators operated as Josephson bifurcation amplifiers. We demonstrate the simultaneous measurement of Rabi oscillations of the four transmons. We find that multiplexed Josephson bifurcation is a high-fidelity readout method, the scalability of which is not limited by the need of a large-bandwidth, nearly quantum-limited amplifier as is the case with linear readout resonators.

DOI
10.1103/physreva.90.062333

Related papers

High-Fidelity Multiplexed Single-Shot Readout for Transmon Qubits With High-Power Measurement

Hwan‐Seop Yeo, Seungwook Woo, Jeongwon Kim +7 more

Single-shot readout of a quantum state is an essential component in building a large-scale quantum processor, and reducing the readout error is the key challenge. To achieve a high signal-to-noise ratio, quantum-limited low-noise amplifiers such as Josephson parametric amplifiers are typically used. However, a high-fidelity single-shot readout method without a parametric amplifier would be advantageous, as it would reduce system complexity. In this paper, we present a high-fidelity result of frequency-multiplexed, high-power single-shot readout for superconducting qubitswithoutusing a parametric amplifier. We achieved a high readout fidelity of 98.3% with a 400 ns pulse and confirmed that the high-power readout can be used in tomography of an entangled state. We have demonstrated the potential usefulness of this technique in characterizing the final quantum state at the end of quantum operations in a superconducting quantum processor.

IEEE Transactions on Applied Superconductivity•Mar 9, 2023•2 citations

Fast, high-fidelity Transmon readout with intrinsic Purcell protection via nonperturbative cross-Kerr coupling

Guillaume Beaulieu, Jun-Zhe Chen, Marco Scigliuzzo +5 more

Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.

quant-pharXiv:2601.04975•PRX Quantum•Jan 9, 2026•2 citations

Multiplexed readout of four qubits in 3D circuit QED architecture using a broadband Josephson parametric amplifier

S. Kundu, Nicolas Gheeraert, Sumeru Hazra +4 more

We propose and demonstrate a frequency-multiplexed readout scheme in 3D circuit-quantum electrodynamics (cQED) architecture. We use four transmon qubits coupled to individual rectangular cavities which are aperture-coupled to a common rectangular waveguide feedline. A coaxial to waveguide transformer at the other end of the feedline allows one to launch and collect the multiplexed signal. The reflected readout signal is amplified by an impedance-engineered broadband parametric amplifier with 380 MHz bandwidth. This provides us high fidelity single-shot readout of multiple qubits using compact microwave circuitry, an efficient way for scaling up to more qubits in 3D cQED.

Applied Physics Letters•Apr 29, 2019•30 citations

Measuring the decoherence of a quantronium qubit with the cavity bifurcation amplifier

Michael Metcalfe, Etienne Boaknin, Vladimir Manucharyan +6 more

Dispersive readouts for superconducting qubits have the advantage of speed and minimal invasiveness. We have developed such an amplifier, the cavity bifurcation amplifier (CBA), and applied it to the readout of the quantronium qubit. It consists of a Josephson junction embedded in a microwave on-chip resonator. In contrast with the Josephson bifurcation amplifier, which has an on-chip capacitor shunting a junction, the resonator is based on a simple coplanar waveguide imposing a predetermined frequency and whose other rf characteristics such as the quality factor are easily controlled and optimized. Under proper microwave irradiation conditions, the CBA has two metastable states. Which state is adopted by the CBA depends on the state of a quantronium qubit coupled to the CBA's junction. Due to the megahertz repetition rate and large signal to noise ratio, we can show directly that the coherence is limited by $1∕f$ gate charge noise when biased at the ``sweet spot''---a point insensitive to first order gate charge fluctuations. This architecture lends itself to scalable quantum computing using a multiresonator chip with multiplexed readouts.

arXiv:0706.0765•Physical Review B•Nov 21, 2007•73 citations

Towards quantum-noise limited multiplexed microwave readout of qubits

Kevin P. O’Brien, Chris Macklin, David J. Hover +5 more

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

IEEE MTT-S International Microwave Symposium digest•May 1, 2016•2 citations

Design, characterization, and multiplexed single-shot readout of a multi-qubit circuit for quantum simulation

Kevin P. O’Brien, Vinay Ramasesh, Allison Dove +3 more

We present the design and characterization of a multi-qubit circuit for quantum simulation experiments. Using the newly-developed Josephson traveling-wave parametric amplifier, we demonstrate simultaneous, multiplexed, single-shot readout of 8 transmon qubits.

Quantum Information and Measurement (QIM)•Jan 1, 2017•0 citations
Achieving individual qubit readout is a major challenge in the development of scalable superconducting quantum processors. We have implemented the multiplexed readout of a four transmon qubit circuit using nonlinear resonators operated as Josephson bifurcation amplifiers. We demonstrate the simultaneous measurement of Rabi oscillations of the four transmons. We find that multiplexed Josephson bifurcation is a high-fidelity readout method, the scalability of which is not limited by the need of a large-bandwidth, nearly quantum-limited amplifier as is the case with linear readout resonators.
Single-shot readout of a quantum state is an essential component in building a large-scale quantum processor, and reducing the readout error is the key challenge. To achieve a high signal-to-noise ratio, quantum-limited low-noise amplifiers such as Josephson parametric amplifiers are typically used. However, a high-fidelity single-shot readout method without a parametric amplifier would be advantageous, as it would reduce system complexity. In this paper, we present a high-fidelity result of frequency-multiplexed, high-power single-shot readout for superconducting qubitswithoutusing a parametric amplifier. We achieved a high readout fidelity of 98.3% with a 400 ns pulse and confirmed that the high-power readout can be used in tomography of an entangled state. We have demonstrated the potential usefulness of this technique in characterizing the final quantum state at the end of quantum operations in a superconducting quantum processor.
Dispersive readout of superconducting qubits relies on a transverse capacitive coupling that hybridizes the qubit with the readout resonator, subjecting the qubit to Purcell decay and measurement-induced state transitions (MIST). Despite the widespread use of Purcell filters to suppress qubit decay and near-quantum-limited amplifiers, dispersive readout often lags behind single- and two-qubit gates in both speed and fidelity. Here, we experimentally demonstrate junction readout, a simple readout architecture that realizes a strong qubit-resonator cross-Kerr interaction without relying on a transverse coupling. This interaction is achieved by coupling a transmon qubit to its readout resonator through both a capacitance and a Josephson junction. By varying the qubit frequency, we show that this hybrid coupling provides intrinsic Purcell protection and enhanced resilience to MIST, enabling readout at high photon numbers. While junction readout is compatible with conventional linear measurement, in this work we exploit the nonlinear coupling to intentionally engineer a large Kerr nonlinearity in the resonator, enabling bifurcation-based readout. Using this approach, we achieve a 99.4 % assignment fidelity with a 68 ns integration time and a 98.4 % QND fidelity without an external Purcell filter or a near-quantum-limited amplifier. These results establish the junction readout architecture with bifurcation-based readout as a scalable and practical alternative to dispersive readout, enabling fast, high-fidelity qubit measurement with reduced hardware overhead.
We propose and demonstrate a frequency-multiplexed readout scheme in 3D circuit-quantum electrodynamics (cQED) architecture. We use four transmon qubits coupled to individual rectangular cavities which are aperture-coupled to a common rectangular waveguide feedline. A coaxial to waveguide transformer at the other end of the feedline allows one to launch and collect the multiplexed signal. The reflected readout signal is amplified by an impedance-engineered broadband parametric amplifier with 380 MHz bandwidth. This provides us high fidelity single-shot readout of multiple qubits using compact microwave circuitry, an efficient way for scaling up to more qubits in 3D cQED.
Dispersive readouts for superconducting qubits have the advantage of speed and minimal invasiveness. We have developed such an amplifier, the cavity bifurcation amplifier (CBA), and applied it to the readout of the quantronium qubit. It consists of a Josephson junction embedded in a microwave on-chip resonator. In contrast with the Josephson bifurcation amplifier, which has an on-chip capacitor shunting a junction, the resonator is based on a simple coplanar waveguide imposing a predetermined frequency and whose other rf characteristics such as the quality factor are easily controlled and optimized. Under proper microwave irradiation conditions, the CBA has two metastable states. Which state is adopted by the CBA depends on the state of a quantronium qubit coupled to the CBA's junction. Due to the megahertz repetition rate and large signal to noise ratio, we can show directly that the coherence is limited by 1∕f1∕f1∕f gate charge noise when biased at the ``sweet spot''---a point insensitive to first order gate charge fluctuations. This architecture lends itself to scalable quantum computing using a multiresonator chip with multiplexed readouts.
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.