Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE MTT-S International Microwave Symposium digest

Towards quantum-noise limited multiplexed microwave readout of qubits

Kevin P. O’Brien, Chris Macklin, David J. Hover, Mollie E. Schwartz, Vladimir Bolkhovsky, Xiang Zhang, William D. Oliver, Irfan A. Siddiqi

Published May 1, 2016• 2 citations
Publisher

Abstract

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

DOI
10.1109/mwsym.2016.7540350

Related papers

A near–quantum-limited Josephson traveling-wave parametric amplifier

Chris Macklin, Kevin P. O’Brien, David J. Hover +5 more

Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.

Science•Sep 3, 2015•826 citations

Development of Quantum Limited Superconducting Amplifiers for Advanced Detection

S. Pagano, C. Barone, M. Borghesi +36 more

Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.

IEEE Transactions on Applied Superconductivity•Jan 25, 2022•16 citations

Circuit Design and Experimental Characterization of a Josephson Traveling-Wave Parametric Amplifier

Christoph Kissling

Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.

•Feb 24, 2026•0 citations

Josephson parametric amplifiers for quantum information processing

Benjamin Huard, Emmanuel Flurin, Nicolas Roch +3 more

Nowadays, it is possible to control and measure the quantum state of systems with a few degrees of freedom, whether they are microscopic objects like cold atoms and single photons, or macroscopic objects like superconducting circuits. Such delicate experiments require an interface which bridges the gap of orders of magnitudes in energy between the quantum object and the data acquisition system. This problem is solved by an active device: the amplifier. Although the amplifier is necessary to overcome the noise at the stage of data acquisition, it eventually alters the signal. We have developed an amplifier for microwave signals which adds only the minimum of noise allowed by quantum laws: the equivalent of half a photon of noise referred to the input. Our amplifier is based on a superconducting circuit of Josephson junctions in superconducting resonators. We found a way to make it practical to use by tuning its center frequency over 500 MHz. We are now trying to increase its bandwidth for a given gain using more compact resonators. In this talk, I will show how the amplifier works and also its applications to quantum information processing. This circuit can be used to generate and combine twin microwave photons within an integrated circuit. Finally, I will show that such an amplifier allows real time measurement of the state of a qubit and quantum feedback protocols.

•Mar 22, 2012•0 citations

Resonant Phase Matching of Josephson Junction Traveling Wave Parametric Amplifiers

Kevin P. O’Brien, Chris Macklin, Irfan A. Siddiqi +1 more

We propose a technique to phase-match Josephson-junction traveling wave parametric amplifiers to achieve high gain (over twenty decibels) over a broad bandwidth (multiple GHz) for applications such as the multiplexed readout of quantum coherent circuits.

Nonlinear Optics•Jan 1, 2015•1 citation

Towards metrology for and with superconducting qubits

Mark Bieler, Christoph Kissling, Victor Gaydamachenko +9 more

Superconducting circuits are one of the leading technologies for the realization of quantum computers. However, achieving practical, fault-tolerant quantum computers requires solutions to many technological challenges. Metrology for qubits and their peripherical devices could accelerate this development and help gaining more confidence in scientific achievements. The Quantum Electronics Department of PTB is – together with national and international partners – actively pursuing this metrological support and this poster will highlight some of the corresponding activities at PTB: (i) Concepts of voltage metrology, such as variants of the Josephson arbitrary waveform synthesizer (JAWS), are adopted at PTB for the control of superconducting qubits in order to realize quantum accurate synthesizers with a minimum of amplitude and phase noise. First waveforms at GHz frequencies, that are generated from a JAWS circuit, have been realized. Such devices could help improving qubit operation. (ii) Parametric amplifiers, that do not contain dissipative elements, enable amplification at the quantum limit of added noise. These devices are ideally suited to amplify read out signals of superconducting qubits. PTB is working on travelling-wave parametric amplifiers (TWPAs) and resonant amplifiers. The latest devices of PTB show 20 dB gain over a bandwidth of 4 GHz and, thus, are extremely promising for qubit readout. (iii) Using the properties of a two-level system, superconducting qubits can be employed as quantum-accurate and extremely sensitive power sensors at cryogenic temperatures. So far PTB has fabricated Transmon qubits and employed qubit spectroscopy and the AC Stark shift for the demonstration of power sensing. The ultimate goal will be to have dedicated circuit elements, that can be placed everywhere in a superconducting circuit, enabling quantum-accurate power sensing at this position. (iv) Opto-electronic techniques based on femtosecond lasers allow for quasi non-invasive measurements of high-frequency signals with an unprecedented bandwidth. Based upon these techniques, PTB has constructed a cryogenic sampling oscilloscope with a theoretical bandwidth exceeding 1 THz. This oscilloscope has been used for the characterization of ultrafast photodiodes at 4 K and will be further enhanced for in-situ waveform measurements for the optimization of superconducting circuits. The poster will summarize these topics, showing the latest results and future prospects.

•Jan 1, 2025•0 citations
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
Ultralow-noise microwave amplification and detection play a central role in different applications, going from fundamental physics experiments to the deployment of quantum technologies. In many applications the necessity of reading multiple detectors, or cavities or qubits, calls for large bandwidth amplifiers with the lowest possible noise. Current technologies are based on High Electron Mobility Transistors and Josephson Parametric Amplifiers. Both have limitations, the former in terms of the minimum noise, the latter in terms of bandwidth. Superconducting Traveling Wave Parametric Amplifiers (TWPAs) have the potential of offering quantum limited noise and large bandwidth. These amplifiers are based on the parametric amplification of microwaves traveling along a transmission line with embedded nonlinear elements. We are developing superconducting TWPAs based both on Josephson junction arrays (Traveling Wave Josephson Parametric Amplifiers) and on nonlinear kinetic inductance (Dispersion Engineered Traveling Wave Kinetic Inductance Amplifiers). Our goal is to achieve large bandwidth (in the 5 to 10 GHz range), large gain (more than 20 dB), large saturation power (more than −50 dBm), and near quantum limited noise (noise temperature less than 600 mK). Current achievements in the design and development of the high performance TWPAs are here reported and discussed, together with current limitations and possible future developments.
Bringing signals from quantum to classical, from few-photon to many-photon levels for further processing, is a common challenge in rising quantum technologies. These include quantum computing, quantum communication, quantum sensing, radio astronomy, and dark matter searches, typically operating at microwave frequencies and millikelvin temperatures. Superconducting parametric amplifiers, as the first piece in the readout chain, have become a cornerstone of these technologies, since they offer unrivaled noise performance near the quantum-mechanical limit and high gain to surpass the noise of subsequent amplifiers. A notable implementation is the Josephson traveling-wave parametric amplifier (TWPA), which stands out due to its bandwidth of several Gigahertz and high saturation power, often larger than -100 dBm. These key properties come at the cost of complexity in design and fabrication: TWPA metamaterials often contain several thousands of Josephson junctions. Designing high-gain TWPAs involves three major challenges: ensuring impedance-matching, phase-matching of parametric amplification, and suppressing unwanted processes, all achievable through sub-wavelength dispersion engineering. This thesis covers the circuit design and analysis, implementation, and experimental characterization of a dispersion-engineered TWPA based on radio-frequency superconducting interference devices (rf-SQUIDs). It focuses on a detailed investigation of dispersion-engineering techniques and their effects on amplifier performance, particularly through the use of time-domain circuit simulations to analyze the multimode dynamics of the circuit. The experimentally realized device features 18 dB of gain, an instantaneous bandwidth spanning from 2.2 to 6.7 GHz, a system noise of 2.5 quanta, and a saturation power of (−86.5 ± 4.0) dBm. With these characteristics, it is suitable for frequency-multiplexed readout of detector arrays or qubits. Its high saturation power, about 10 dB higher than other reported Josephson-junction-based TWPAs, allows increasing the number of qubits per readout line, or decreasing the intermodulation between frequency-multiplexed qubits, both crucial for scaling up quantum computation.
Nowadays, it is possible to control and measure the quantum state of systems with a few degrees of freedom, whether they are microscopic objects like cold atoms and single photons, or macroscopic objects like superconducting circuits. Such delicate experiments require an interface which bridges the gap of orders of magnitudes in energy between the quantum object and the data acquisition system. This problem is solved by an active device: the amplifier. Although the amplifier is necessary to overcome the noise at the stage of data acquisition, it eventually alters the signal. We have developed an amplifier for microwave signals which adds only the minimum of noise allowed by quantum laws: the equivalent of half a photon of noise referred to the input. Our amplifier is based on a superconducting circuit of Josephson junctions in superconducting resonators. We found a way to make it practical to use by tuning its center frequency over 500 MHz. We are now trying to increase its bandwidth for a given gain using more compact resonators. In this talk, I will show how the amplifier works and also its applications to quantum information processing. This circuit can be used to generate and combine twin microwave photons within an integrated circuit. Finally, I will show that such an amplifier allows real time measurement of the state of a qubit and quantum feedback protocols.
Superconducting circuits are one of the leading technologies for the realization of quantum computers. However, achieving practical, fault-tolerant quantum computers requires solutions to many technological challenges. Metrology for qubits and their peripherical devices could accelerate this development and help gaining more confidence in scientific achievements. The Quantum Electronics Department of PTB is – together with national and international partners – actively pursuing this metrological support and this poster will highlight some of the corresponding activities at PTB: (i) Concepts of voltage metrology, such as variants of the Josephson arbitrary waveform synthesizer (JAWS), are adopted at PTB for the control of superconducting qubits in order to realize quantum accurate synthesizers with a minimum of amplitude and phase noise. First waveforms at GHz frequencies, that are generated from a JAWS circuit, have been realized. Such devices could help improving qubit operation. (ii) Parametric amplifiers, that do not contain dissipative elements, enable amplification at the quantum limit of added noise. These devices are ideally suited to amplify read out signals of superconducting qubits. PTB is working on travelling-wave parametric amplifiers (TWPAs) and resonant amplifiers. The latest devices of PTB show 20 dB gain over a bandwidth of 4 GHz and, thus, are extremely promising for qubit readout. (iii) Using the properties of a two-level system, superconducting qubits can be employed as quantum-accurate and extremely sensitive power sensors at cryogenic temperatures. So far PTB has fabricated Transmon qubits and employed qubit spectroscopy and the AC Stark shift for the demonstration of power sensing. The ultimate goal will be to have dedicated circuit elements, that can be placed everywhere in a superconducting circuit, enabling quantum-accurate power sensing at this position. (iv) Opto-electronic techniques based on femtosecond lasers allow for quasi non-invasive measurements of high-frequency signals with an unprecedented bandwidth. Based upon these techniques, PTB has constructed a cryogenic sampling oscilloscope with a theoretical bandwidth exceeding 1 THz. This oscilloscope has been used for the characterization of ultrafast photodiodes at 4 K and will be further enhanced for in-situ waveform measurements for the optimization of superconducting circuits. The poster will summarize these topics, showing the latest results and future prospects.