Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1407.5779 · Physical Review A

State-dependent photon blockade via quantum-reservoir engineering

Adam Miranowicz, J. Bajer, Małgorzata Paprzycka, Yu-xi Liu, Alexandre M. Zagoskin, Franco Nori

Published Sep 19, 2014• 85 citations
arXivHTMLPDF

Abstract

An arbitrary initial state of an optical or microwave field in a lossy driven nonlinear cavity can be changed into a partially incoherent superposition of only the vacuum and the single-photon states. This effect is known as single-photon blockade, which is usually analyzed for a Kerr-type nonlinear cavity parametrically driven by a single-photon process assuming single-photon loss mechanisms. We study photon blockade engineering via a nonlinear reservoir, i.e., a quantum reservoir, where only two-photon absorption is allowed. Namely, we analyze a lossy nonlinear cavity parametrically driven by a two-photon process and allowing two-photon loss mechanisms, as described by the master equation derived for a two-photon absorbing reservoir. The nonlinear cavity engineering can be realized by a linear cavity with a tunable two-level system via the Jaynes-Cummings interaction in the dispersive limit. We show that by tuning properly the frequencies of the driving field and the two-level system, the steady state of the cavity field can be the single-photon Fock state or a partially incoherent superposition of several Fock states with photon numbers, e.g., (0,2), (1,3), (0,1,2), or (0,2,4). At the right (now fixed) frequencies, we observe that an arbitrary initial coherent or incoherent superposition of Fock states with an even (odd) number of photons is changed into a partially incoherent superposition of a few Fock states of the same photon-number parity. We find analytically approximate formulas for these two kinds of solutions for several differently tuned systems. A general solution for an arbitrary initial state is a weighted mixture of the above two solutions with even and odd photon numbers, where the weights are given by the probabilities of measuring the even and odd numbers of photons of the initial cavity field, respectively. This can be interpreted as two separate evolution-dissipation channels for even and odd-number states. Thus, in contrast to the standard predictions of photon blockade, we prove that the steady state of the cavity field, in the engineered photon blockade, can depend on its initial state. To make our results more explicit, we analyze photon blockades for some initial infinite-dimensional quantum and classical states via the Wigner and photon-number distributions.

DOI
10.1103/physreva.90.033831

Related papers

Photon Blockade in a Two-Cavity System with Two-Photon Dissipation

Hongming Tao

The photon blockade is a key quantum-nonlinear effect in which the admission of a second photon to a resonator is inhibited, enabling on-demand single-photon emission. Its practical use is limited by the weak intrinsic nonlinearity of most optical platforms. We address this limitation in a coupled-cavity architecture by engineering two-photon dissipation as a control resource rather than a detrimental loss. Within a quantum-master-equation framework, we model single-photon loss, engineered two-photon decay, and pure dephasing, and analyze their joint impact on the steady-state statistics of the driven cavities. We track the zero-delay correlation, photon populations, and detuning/drive dependences under distinct driving schemes (both cavities driven vs. single-cavity drive with. The results show that adding two-photon dissipation (i) suppresses multiphoton occupation and strengthens antibunching, (ii) broadens the operating window in detuning and drive amplitude, and (iii) improves robustness against moderate dephasing and device imperfections. A mechanism analysis attributes these gains to interference between coherent second-order processes and dissipative selection that stabilizes the odd-photon manifold. The study yields design guidelines for realizing stable, cavity-based single-photon sources using dissipation engineering.

International Conference on Intelligent Informatics and Biomedical Sciences (ICIIBMS)•Dec 2, 2025•0 citations

Two-photon and three-photon blockades in driven nonlinear systems

Adam Miranowicz, Małgorzata Paprzycka, Yu-xi Liu +2 more

Photon blockade, in analogy to Coulomb's or phonon blockades, is a phenomenon when a single photon in a nonlinear cavity blocks the transmission of a second photon. This effect can occur in Kerr-type systems driven by a laser due to strong nonlinear photon-photon interactions. We predict the occurrence of higher-order photon blockades where the transmission of more than two photons is effectively blocked by single- and two-photon states. This photon blockade can be achieved by tuning the frequency of the laser driving field to be equal to the sum of the Kerr nonlinearity and the cavity resonance frequency. We refer to this phenomenon as two-photon blockade or two-photon state truncation via nonlinear scissors, and can also be interpreted as photon-induced tunneling. We also show that, for a driving-field frequency fulfilling another resonance condition and for higher strengths of the driving field, even a three-photon blockade can occur but less clearly than in the case of single- and two-photon blockades. We demonstrate how various photon blockades can be identified by analyzing photon-number correlations, coherence and entropic properties, Wigner functions, and spectra of squeezing. We show that two- and three-photon blockades can, in principle, be observed in various cavity and circuit quantum electrodynamical systems for which the standard single-photon blockade was observed without the need of using higher-order driving interactions or Kerr media exhibiting higher-order nonlinear susceptibility.

arXiv:1212.4365•Physical Review A•Feb 8, 2013•208 citations

Photon blockade effect from synergistic optical parametric amplification and driving force in Kerr-medium single-mode cavity

Zhang Zhiqiang

This work investigates photon blockade control in a hybrid quantum system containing a Kerr-nonlinear cavity coupled to an optical parametric amplifier (OPA). The dynamics are governed by a master equation derived from an effective Hamiltonian that includes cavity decay. To obtain analytical solutions, the system's quantum state is expanded in the Fock basis up to the two-photon level. Solving the steady-state Schrodinger equation yields probability amplitudes and the analytical conditions for optimal photon blockade. Results confirm that photon blockade is achievable with suitable parameters. Excellent agreement is found between the analytical solutions and numerical simulations for the steady-state, equal-time second-order correlation function, validating both the analytical method and the blockade effect. Numerically, the average intracavity photon number increases significantly under resonance, providing a theoretical pathway for enhancing single-photon source brightness. Furthermore, the driving phase is shown to regulate the optimal blockade region: it shifts the parabolic region within the two-dimensional parameter space of driving strength and OPA nonlinearity and can even reverse its opening direction. The influence of Kerr nonlinearity is also examined. Photon blockade remains robust across a wide range of Kerr strengths. Physical analysis attributes the effect to destructive quantum interference between two distinct excitation pathways that suppress two-photon states. While Kerr nonlinearity shifts the system's energy levels, it does not disrupt this interference mechanism, explaining the effect's stability over a broad parameter range.

quant-pharXiv:2601.01819•Acta Physica Sinica•Jan 6, 2026•1 citation

Retrieval of photon blockade effect in the dispersive Jaynes-Cummings model

Ya-Ting Guo, Fen Zou, Jin‐Feng Huang +1 more

We propose a reliable scheme to recover the conventional photon blockade effect in the dispersive Jaynes-Cummings model, which describes a two-level atom coupled to a single-mode cavity field in the large-detuning regime. This is achieved by introducing a transversal driving to the atom and then photonic nonlinearity is obtained. The eigenenergy spectrum of the system is derived analytically and the photon blockade effect is confirmed by numerically calculating the photon-number distributions and equal-time second-order correlation function of the cavity field in the presence of system dissipations. We find that the conventional photon blockade effect can be recovered at proper atomic and cavity-field drivings. This work will provide a method to generate the conventional photon blockade effect in the dispersively coupled quantum optical systems.

arXiv:2106.01113•Physical Review A•Jan 10, 2022•16 citations

Research on photon blockade based on two-photon dissipation

Hongming Tao

The photon blockade (PB) effect represents a quintessential manifestation of quantum optical nonlinearity, where the presence of a single photon within an optical cavity prevents the entry of a second one, thereby realizing a single-photon source. This effect underpins numerous applications in quantum information processing, secure communication, and quantum computation. Nevertheless, the intrinsic nonlinearity of practical optical systems is often too weak to produce a strong blockade, making the enhancement and controllability of the PB effect a persistent challenge. To overcome this limitation, we investigate a two-cavity quantum system incorporating two-photon dissipation as an alternative mechanism for realizing photon blockade. In contrast to conventional schemes that primarily consider single-photon loss, the proposed configuration introduces a second-order nonlinear dissipation channel, through which the correlated loss of photon pairs fundamentally modifies the photon statistics and strengthens the blockade effect. Based on quantum master equation theory, we constructed a model of a two-cavity system incorporating two-photon dissipation and analyzed the effect of different parameters on the photon blockade effect through numerical simulations.

International Conference on Optoelectronic Materials and Devices (ICOMD)•May 18, 2026•0 citations

Inducing tunable conventional photon blockade and two-photon blockade in a second-order nonlinear system with two-level atoms

Hongyu Lin, Xiangyi Luo, Xiaoqian Wang +3 more

We have achieved a conventional photon blockade and two-photon blockade in a second-order nonlinear system with a two-level atom embedded in a high-frequency cavity. The physical mechanisms behind the implementation of both types of photon blockade are explained, and analytical conditions for achieving a conventional photon blockade are derived, which are consistent with the numerical solutions of the master equation in the steady-state limit. By appropriately setting the system parameters, we can achieve simultaneous conventional photon blockade in the high-frequency cavity and two-photon blockade in the low-frequency cavity. The effects of driving factors and environmental temperature on photon blockade are analyzed. The adjustability of the coupling coefficient between the high-frequency cavity and the atom, as well as the nonlinear coupling coefficient between different nanocavities, is discussed in the context of implementing conventional photon blockades. The tunability of these coupling coefficients may significantly reduce the experimental complexity of implementing the system.

Optics Express•May 21, 2024•5 citations
An arbitrary initial state of an optical or microwave field in a lossy driven nonlinear cavity can be changed into a partially incoherent superposition of only the vacuum and the single-photon states. This effect is known as single-photon blockade, which is usually analyzed for a Kerr-type nonlinear cavity parametrically driven by a single-photon process assuming single-photon loss mechanisms. We study photon blockade engineering via a nonlinear reservoir, i.e., a quantum reservoir, where only two-photon absorption is allowed. Namely, we analyze a lossy nonlinear cavity parametrically driven by a two-photon process and allowing two-photon loss mechanisms, as described by the master equation derived for a two-photon absorbing reservoir. The nonlinear cavity engineering can be realized by a linear cavity with a tunable two-level system via the Jaynes-Cummings interaction in the dispersive limit. We show that by tuning properly the frequencies of the driving field and the two-level system, the steady state of the cavity field can be the single-photon Fock state or a partially incoherent superposition of several Fock states with photon numbers, e.g., (0,2), (1,3), (0,1,2), or (0,2,4). At the right (now fixed) frequencies, we observe that an arbitrary initial coherent or incoherent superposition of Fock states with an even (odd) number of photons is changed into a partially incoherent superposition of a few Fock states of the same photon-number parity. We find analytically approximate formulas for these two kinds of solutions for several differently tuned systems. A general solution for an arbitrary initial state is a weighted mixture of the above two solutions with even and odd photon numbers, where the weights are given by the probabilities of measuring the even and odd numbers of photons of the initial cavity field, respectively. This can be interpreted as two separate evolution-dissipation channels for even and odd-number states. Thus, in contrast to the standard predictions of photon blockade, we prove that the steady state of the cavity field, in the engineered photon blockade, can depend on its initial state. To make our results more explicit, we analyze photon blockades for some initial infinite-dimensional quantum and classical states via the Wigner and photon-number distributions.
The photon blockade is a key quantum-nonlinear effect in which the admission of a second photon to a resonator is inhibited, enabling on-demand single-photon emission. Its practical use is limited by the weak intrinsic nonlinearity of most optical platforms. We address this limitation in a coupled-cavity architecture by engineering two-photon dissipation as a control resource rather than a detrimental loss. Within a quantum-master-equation framework, we model single-photon loss, engineered two-photon decay, and pure dephasing, and analyze their joint impact on the steady-state statistics of the driven cavities. We track the zero-delay correlation, photon populations, and detuning/drive dependences under distinct driving schemes (both cavities driven vs. single-cavity drive with. The results show that adding two-photon dissipation (i) suppresses multiphoton occupation and strengthens antibunching, (ii) broadens the operating window in detuning and drive amplitude, and (iii) improves robustness against moderate dephasing and device imperfections. A mechanism analysis attributes these gains to interference between coherent second-order processes and dissipative selection that stabilizes the odd-photon manifold. The study yields design guidelines for realizing stable, cavity-based single-photon sources using dissipation engineering.
Photon blockade, in analogy to Coulomb's or phonon blockades, is a phenomenon when a single photon in a nonlinear cavity blocks the transmission of a second photon. This effect can occur in Kerr-type systems driven by a laser due to strong nonlinear photon-photon interactions. We predict the occurrence of higher-order photon blockades where the transmission of more than two photons is effectively blocked by single- and two-photon states. This photon blockade can be achieved by tuning the frequency of the laser driving field to be equal to the sum of the Kerr nonlinearity and the cavity resonance frequency. We refer to this phenomenon as two-photon blockade or two-photon state truncation via nonlinear scissors, and can also be interpreted as photon-induced tunneling. We also show that, for a driving-field frequency fulfilling another resonance condition and for higher strengths of the driving field, even a three-photon blockade can occur but less clearly than in the case of single- and two-photon blockades. We demonstrate how various photon blockades can be identified by analyzing photon-number correlations, coherence and entropic properties, Wigner functions, and spectra of squeezing. We show that two- and three-photon blockades can, in principle, be observed in various cavity and circuit quantum electrodynamical systems for which the standard single-photon blockade was observed without the need of using higher-order driving interactions or Kerr media exhibiting higher-order nonlinear susceptibility.
This work investigates photon blockade control in a hybrid quantum system containing a Kerr-nonlinear cavity coupled to an optical parametric amplifier (OPA). The dynamics are governed by a master equation derived from an effective Hamiltonian that includes cavity decay. To obtain analytical solutions, the system's quantum state is expanded in the Fock basis up to the two-photon level. Solving the steady-state Schrodinger equation yields probability amplitudes and the analytical conditions for optimal photon blockade. Results confirm that photon blockade is achievable with suitable parameters. Excellent agreement is found between the analytical solutions and numerical simulations for the steady-state, equal-time second-order correlation function, validating both the analytical method and the blockade effect. Numerically, the average intracavity photon number increases significantly under resonance, providing a theoretical pathway for enhancing single-photon source brightness. Furthermore, the driving phase is shown to regulate the optimal blockade region: it shifts the parabolic region within the two-dimensional parameter space of driving strength and OPA nonlinearity and can even reverse its opening direction. The influence of Kerr nonlinearity is also examined. Photon blockade remains robust across a wide range of Kerr strengths. Physical analysis attributes the effect to destructive quantum interference between two distinct excitation pathways that suppress two-photon states. While Kerr nonlinearity shifts the system's energy levels, it does not disrupt this interference mechanism, explaining the effect's stability over a broad parameter range.
We propose a reliable scheme to recover the conventional photon blockade effect in the dispersive Jaynes-Cummings model, which describes a two-level atom coupled to a single-mode cavity field in the large-detuning regime. This is achieved by introducing a transversal driving to the atom and then photonic nonlinearity is obtained. The eigenenergy spectrum of the system is derived analytically and the photon blockade effect is confirmed by numerically calculating the photon-number distributions and equal-time second-order correlation function of the cavity field in the presence of system dissipations. We find that the conventional photon blockade effect can be recovered at proper atomic and cavity-field drivings. This work will provide a method to generate the conventional photon blockade effect in the dispersively coupled quantum optical systems.
The photon blockade (PB) effect represents a quintessential manifestation of quantum optical nonlinearity, where the presence of a single photon within an optical cavity prevents the entry of a second one, thereby realizing a single-photon source. This effect underpins numerous applications in quantum information processing, secure communication, and quantum computation. Nevertheless, the intrinsic nonlinearity of practical optical systems is often too weak to produce a strong blockade, making the enhancement and controllability of the PB effect a persistent challenge. To overcome this limitation, we investigate a two-cavity quantum system incorporating two-photon dissipation as an alternative mechanism for realizing photon blockade. In contrast to conventional schemes that primarily consider single-photon loss, the proposed configuration introduces a second-order nonlinear dissipation channel, through which the correlated loss of photon pairs fundamentally modifies the photon statistics and strengthens the blockade effect. Based on quantum master equation theory, we constructed a model of a two-cavity system incorporating two-photon dissipation and analyzed the effect of different parameters on the photon blockade effect through numerical simulations.
We have achieved a conventional photon blockade and two-photon blockade in a second-order nonlinear system with a two-level atom embedded in a high-frequency cavity. The physical mechanisms behind the implementation of both types of photon blockade are explained, and analytical conditions for achieving a conventional photon blockade are derived, which are consistent with the numerical solutions of the master equation in the steady-state limit. By appropriately setting the system parameters, we can achieve simultaneous conventional photon blockade in the high-frequency cavity and two-photon blockade in the low-frequency cavity. The effects of driving factors and environmental temperature on photon blockade are analyzed. The adjustability of the coupling coefficient between the high-frequency cavity and the atom, as well as the nonlinear coupling coefficient between different nanocavities, is discussed in the context of implementing conventional photon blockades. The tunability of these coupling coefficients may significantly reduce the experimental complexity of implementing the system.