Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1407.2921 · SiPS ... design and implementation - IEEE Workshop on Signal Processing Systems

Increasing the speed of polar list decoders

Gabi Sarkis, Pascal Giard, Alexander Vardy, Claude Thibeault, Warren J. Gross

Published Oct 1, 2014• 36 citations
arXivHTMLPDF

Abstract

In this work, we present a simplified successive cancellation list decoder that uses a Chase-like decoding process to achieve a six time improvement in speed compared to successive cancellation list decoding while maintaining the same error-correction performance advantage over standard successive-cancellation polar decoders. We discuss the algorithm and detail the data structures and methods used to obtain this speed-up. We also propose an adaptive decoding algorithm that significantly improves the throughput while retaining the error-correction performance. Simulation results over the additive white Gaussian noise channel are provided and show that the proposed system is up to 16 times faster than an LDPC decoder of the same frame size, code rate, and similar error-correction performance, making it more suitable for use as a software decoding solution.

DOI
10.1109/sips.2014.6986089

Related papers

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

arXiv:1701.08126•Jan 27, 2017•4 citations

Fast Simplified Successive-Cancellation List Decoding of Polar Codes

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.

IEEE Wireless Communications and Networking Conference Workshops (WCNCW)•Mar 1, 2017•86 citations

A Fast Polar Code List Decoder Architecture Based on Sphere Decoding

Seyyed Ali Hashemi, Carlo Condo, Warren J. Gross

Polar codes are a recently discovered family of capacity-achieving error-correcting codes. Among the proposed decoding algorithms, successive-cancellation list decoding guarantees the best error-correction performance with codes of moderate lengths, but it yields low throughput. Speed-up techniques have been proposed in the past: most of them rely on approximations that degrade the error-correction capability of the algorithm. We propose a speed-up technique for successive-cancellation list decoding of polar codes that is exact for list size of 2, while its approximations bring negligible error-correction performance degradation (<;0.05 dB) for other list sizes. A decoder architecture is designed: the proposed technique increases the throughput of a factor of 3.16×, at the cost of 14.2% in area occupation.

IEEE Transactions on Circuits and Systems I Regular Papers•Nov 14, 2016•100 citations

Increasing the Throughput of Polar Decoders

Gabi Sarkis, Warren J. Gross

The serial nature of successive-cancellation decoding results in low polar decoder throughput. In this letter we present an improved version of the simplified successive-cancellation decoding algorithm that increases decoding throughput without degrading the error-correction performance. We show that the proposed algorithm has up to three times the throughput of the simplified successive-cancellation decoding algorithm and up to twenty-nine times the throughput of a standard successive-cancellation decoder while using the same number of processing elements.

IEEE Communications Letters•Feb 19, 2013•106 citations

Fast Successive-Cancellation List Flip Decoding of Polar Codes

Nghia Doan, Seyyed Ali Hashemi, Warren J. Gross

This work presents a fast successive-cancellation list flip (Fast-SCLF) decoding algorithm for polar codes that addresses the high latency issue associated with the successive-cancellation list flip (SCLF) decoding algorithm. We first propose a bit-flipping strategy tailored to the state-of-the-art fast successive-cancellation list (FSCL) decoding that avoids tree-traversal in the binary tree representation of SCLF, thus reducing the latency of the decoding process. We then derive a parameterized path selection error model to accurately estimate the bit index at which the correct decoding path is eliminated from the initial FSCL decoding. The trainable parameter is optimized online based on an efficient supervised learning framework. Simulation results show that for a polar code of length 512 with 256 information bits, with similar error-correction performance and memory consumption, the proposed Fast-SCLF decoder reduces up to 73.4% of the average decoding latency of the SCLF decoder with the same list size at the frame error rate of 10−4, while incurring a maximum computational complexity overhead of 27.6%. For the same polar code of length 512 with 256 information bits and at practical signal-to-noise ratios, the proposed decoder with list size 4 reduces 89.3% and 43.7% of the average complexity and decoding latency of the FSCL decoder with list size 32 (FSCL-32), respectively, while also reducing 83.2% of the memory consumption of FSCL-32. The significant improvements of the proposed decoder come at the cost of 0.07 dB error-correction performance degradation compared with FSCL-32.

arXiv:2109.12239•IEEE Access•Jan 1, 2022•8 citations

Complexity Reduction of Polar Decoders Using Adaptive Fast-SSC and Fast-SSCL Algorithms

Mohamed Lamrini, Zakarea Rahou, Ismail Akharraz +1 more

In this work, we propose a hybrid decoding approach that dynamically segments the received frame into three subframes based on the distribution of the first decoding errors. The initial and final subframes, where the error probability is low, are processed using the fast simplified successive cancellation decoder. The central subframe, where errors are more concentrated, is decoded using fast simplified successive cancellation list with a list size of L = 8, ensuring robust error-correction. Simulation results obtained on a polar code PC(128,32) show that the proposed decoder reduces computational complexity by 82% compared to the conventional successive cancellation list decoder, while preserving the same error-correction performance.

EPJ Web of Conferences•Jan 1, 2026•0 citations
In this work, we present a simplified successive cancellation list decoder that uses a Chase-like decoding process to achieve a six time improvement in speed compared to successive cancellation list decoding while maintaining the same error-correction performance advantage over standard successive-cancellation polar decoders. We discuss the algorithm and detail the data structures and methods used to obtain this speed-up. We also propose an adaptive decoding algorithm that significantly improves the throughput while retaining the error-correction performance. Simulation results over the additive white Gaussian noise channel are provided and show that the proposed system is up to 16 times faster than an LDPC decoder of the same frame size, code rate, and similar error-correction performance, making it more suitable for use as a software decoding solution.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time-steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
Polar codes are capacity achieving error correcting codes that can be decoded through the successive-cancellation algorithm. To improve its error-correction performance, a list-based version called successive-cancellation list (SCL) has been proposed in the past, that however substantially increases the number of time-steps in the decoding process. The simplified SCL (SSCL) decoding algorithm exploits constituent codes within the polar code structure to greatly reduce the required number of time-steps without introducing any error-correction performance loss. In this paper, we propose a faster decoding approach to decode one of these constituent codes, the Rate-1 node. We use this Rate-1 node decoder to develop Fast-SSCL. We demonstrate that only a list-size-bound number of bits needs to be estimated in Rate-1 nodes and Fast-SSCL exactly matches the error-correction performance of SCL and SSCL. This technique can potentially greatly reduce the total number of time-steps needed for polar codes decoding: analysis on a set of case studies show that Fast-SSCL has a number of time- steps requirement that is up to 66.6% lower than SSCL and 88.1% lower than SCL.
Polar codes are a recently discovered family of capacity-achieving error-correcting codes. Among the proposed decoding algorithms, successive-cancellation list decoding guarantees the best error-correction performance with codes of moderate lengths, but it yields low throughput. Speed-up techniques have been proposed in the past: most of them rely on approximations that degrade the error-correction capability of the algorithm. We propose a speed-up technique for successive-cancellation list decoding of polar codes that is exact for list size of 2, while its approximations bring negligible error-correction performance degradation (<;0.05 dB) for other list sizes. A decoder architecture is designed: the proposed technique increases the throughput of a factor of 3.16×, at the cost of 14.2% in area occupation.
The serial nature of successive-cancellation decoding results in low polar decoder throughput. In this letter we present an improved version of the simplified successive-cancellation decoding algorithm that increases decoding throughput without degrading the error-correction performance. We show that the proposed algorithm has up to three times the throughput of the simplified successive-cancellation decoding algorithm and up to twenty-nine times the throughput of a standard successive-cancellation decoder while using the same number of processing elements.
This work presents a fast successive-cancellation list flip (Fast-SCLF) decoding algorithm for polar codes that addresses the high latency issue associated with the successive-cancellation list flip (SCLF) decoding algorithm. We first propose a bit-flipping strategy tailored to the state-of-the-art fast successive-cancellation list (FSCL) decoding that avoids tree-traversal in the binary tree representation of SCLF, thus reducing the latency of the decoding process. We then derive a parameterized path selection error model to accurately estimate the bit index at which the correct decoding path is eliminated from the initial FSCL decoding. The trainable parameter is optimized online based on an efficient supervised learning framework. Simulation results show that for a polar code of length 512 with 256 information bits, with similar error-correction performance and memory consumption, the proposed Fast-SCLF decoder reduces up to 73.4% of the average decoding latency of the SCLF decoder with the same list size at the frame error rate of 10−4, while incurring a maximum computational complexity overhead of 27.6%. For the same polar code of length 512 with 256 information bits and at practical signal-to-noise ratios, the proposed decoder with list size 4 reduces 89.3% and 43.7% of the average complexity and decoding latency of the FSCL decoder with list size 32 (FSCL-32), respectively, while also reducing 83.2% of the memory consumption of FSCL-32. The significant improvements of the proposed decoder come at the cost of 0.07 dB error-correction performance degradation compared with FSCL-32.
In this work, we propose a hybrid decoding approach that dynamically segments the received frame into three subframes based on the distribution of the first decoding errors. The initial and final subframes, where the error probability is low, are processed using the fast simplified successive cancellation decoder. The central subframe, where errors are more concentrated, is decoded using fast simplified successive cancellation list with a list size of L = 8, ensuring robust error-correction. Simulation results obtained on a polar code PC(128,32) show that the proposed decoder reduces computational complexity by 82% compared to the conventional successive cancellation list decoder, while preserving the same error-correction performance.