Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1406.2404 · Physical Review A

Leakage-resilient approach to fault-tolerant quantum computing with superconducting elements

Joydip Ghosh, Austin G. Fowler

Published Feb 20, 2015• 42 citations
arXivHTMLPDF

Abstract

Superconducting qubits, while promising for scalability and long coherence times, contain more than two energy levels, and therefore are susceptible to errors generated by the leakage of population outside of the computational subspace. Such leakage errors constitute a prominent roadblock towards fault-tolerant quantum computing (FTQC) with superconducting qubits. FTQC using topological codes is based on sequential measurements of multiqubit stabilizer operators. Here, we first propose a leakage-resilient procedure to perform repetitive measurements of multiqubit stabilizer operators, and then use this scheme as an ingredient to develop a leakage-resilient approach for surface code quantum error correction with superconducting circuits. Our protocol is based on swap operations between data and ancilla qubits at the end of every cycle, requiring read-out and reset operations on every physical qubit in the system, and thereby preventing persistent leakage errors from occurring.

DOI
10.1103/physreva.91.020302

Related papers

Leakage and Paralysis in Ancilla-assisted Qubit Measurement: Consequences for Topological Error Correction in Superconducting Architectures

Joydip Ghosh, Austin G. Fowler, John M. Martinis +1 more

Abstract : Although topological error-correcting codes offer a promising paradigm for fault- tolerant quantum computation, their robustness in the presence of leakage to non- computational states is unclear. Here we explore the signature and consequences of leakage errors on ancilla-assisted Pauli operator measurement in superconducting devices. We consider a realistic coupled-qutrit model and simulate the repeated measurement of a single sigma z operator. Typically, a data-qubit leakage event manifests itself by producing a noisy ancilla qubit that randomly reads /0/ or /1/ from cycle to cycle. Although the measurement operation is compromised, the presence of the leakage event is apparent and detectable. However, there is also the possibility of a less typical but more dangerous type of leakage event, where the ancilla becomes paralyzed rendering it oblivious to data-qubit errors for many consecutive measurement cycles and compromising the fault-tolerance. Certain dynamical phases associated with the entangling gate determine which type of leakage event will occur in practice. Leakage errors occur in most qubit realizations and our model and results are relevant for many stabilizer-based error correction protocols.

•Jun 4, 2013•1 citation

Understanding the effects of leakage in superconducting quantum-error-detection circuits

Joydip Ghosh, Austin G. Fowler, John M. Martinis +1 more

The majority of quantum-error-detection and correction protocols assume that the population in a qubit does not leak outside of its computational subspace. For many existing approaches, however, the physical qubits do possess more than two energy levels and consequently are prone to such leakage events. Analyzing the effects of leakage is therefore essential to devise optimal protocols for quantum gates, measurement, and error correction. In this article, we present a detailed study of leakage in a two-qubit superconducting stabilizer measurement circuit. We simulate the repeated ancilla-assisted measurement of a single ${\ensuremath{\sigma}}^{z}$ operator for a data qubit, record the outcome at the end of each measurement cycle, and explore the signature of leakage events in the obtained readout statistics. An analytic model is also developed that closely approximates the results of our numerical simulations. We find that leakage leads to destructive features in the quantum-error-detection scheme, making additional hardware and software protocols necessary.

arXiv:1306.0925•Physical Review A•Dec 23, 2013•70 citations

Coupler-Assisted Leakage Reduction for Scalable Quantum Error Correction with Superconducting Qubits

Xiaohan Yang, Ji Chu, Zechen Guo +21 more

Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into noncomputational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine quantum error correction (QEC) scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.

arXiv:2403.16155•Physical Review Letters•Oct 24, 2024•21 citations

Overcoming leakage in quantum error correction

Kevin C. Miao, Matt McEwen, Juan Atalaya +97 more

Abstract The leakage of quantum information out of the two computational states of a qubit into other energy states represents a major challenge for quantum error correction. During the operation of an error-corrected algorithm, leakage builds over time and spreads through multi-qubit interactions. This leads to correlated errors that degrade the exponential suppression of the logical error with scale, thus challenging the feasibility of quantum error correction as a path towards fault-tolerant quantum computation. Here, we demonstrate a distance-3 surface code and distance-21 bit-flip code on a quantum processor for which leakage is removed from all qubits in each cycle. This shortens the lifetime of leakage and curtails its ability to spread and induce correlated errors. We report a tenfold reduction in the steady-state leakage population of the data qubits encoding the logical state and an average leakage population of less than 1 × 10 −3 throughout the entire device. Our leakage removal process efficiently returns the system back to the computational basis. Adding it to a code circuit would prevent leakage from inducing correlated error across cycles. With this demonstration that leakage can be contained, we have resolved a key challenge for practical quantum error correction at scale.

arXiv:2211.04728•Nature Physics•Oct 5, 2023•96 citations

Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits

Nathan Lacroix, Luca Hofele, Ants Remm +14 more

Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multilevel structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement inaccuracy of 7×10^{-4} in approximately 50 ns with a low error of 2.5(1)×10^{-3} on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods that do not scale. Our approach does not require additional control electronics or on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.

arXiv:2309.07060•Physical Review Letters•Mar 25, 2025•29 citations

Removing leakage-induced correlated errors in superconducting quantum error correction

M. McEwen, D. Kafri, Z. Chen +48 more

Quantum computing can become scalable through error correction, but logical error rates only decrease with system size when physical errors are sufficiently uncorrelated. During computation, unused high energy levels of the qubits can become excited, creating leakage states that are long-lived and mobile. Particularly for superconducting transmon qubits, this leakage opens a path to errors that are correlated in space and time. Here, we report a reset protocol that returns a qubit to the ground state from all relevant higher level states. We test its performance with the bit-flip stabilizer code, a simplified version of the surface code for quantum error correction. We investigate the accumulation and dynamics of leakage during error correction. Using this protocol, we find lower rates of logical errors and an improved scaling and stability of error suppression with increasing qubit number. This demonstration provides a key step on the path towards scalable quantum computing.

arXiv:2102.06131•Nature Communications•Mar 19, 2021•129 citations
Superconducting qubits, while promising for scalability and long coherence times, contain more than two energy levels, and therefore are susceptible to errors generated by the leakage of population outside of the computational subspace. Such leakage errors constitute a prominent roadblock towards fault-tolerant quantum computing (FTQC) with superconducting qubits. FTQC using topological codes is based on sequential measurements of multiqubit stabilizer operators. Here, we first propose a leakage-resilient procedure to perform repetitive measurements of multiqubit stabilizer operators, and then use this scheme as an ingredient to develop a leakage-resilient approach for surface code quantum error correction with superconducting circuits. Our protocol is based on swap operations between data and ancilla qubits at the end of every cycle, requiring read-out and reset operations on every physical qubit in the system, and thereby preventing persistent leakage errors from occurring.
Abstract : Although topological error-correcting codes offer a promising paradigm for fault- tolerant quantum computation, their robustness in the presence of leakage to non- computational states is unclear. Here we explore the signature and consequences of leakage errors on ancilla-assisted Pauli operator measurement in superconducting devices. We consider a realistic coupled-qutrit model and simulate the repeated measurement of a single sigma z operator. Typically, a data-qubit leakage event manifests itself by producing a noisy ancilla qubit that randomly reads /0/ or /1/ from cycle to cycle. Although the measurement operation is compromised, the presence of the leakage event is apparent and detectable. However, there is also the possibility of a less typical but more dangerous type of leakage event, where the ancilla becomes paralyzed rendering it oblivious to data-qubit errors for many consecutive measurement cycles and compromising the fault-tolerance. Certain dynamical phases associated with the entangling gate determine which type of leakage event will occur in practice. Leakage errors occur in most qubit realizations and our model and results are relevant for many stabilizer-based error correction protocols.
The majority of quantum-error-detection and correction protocols assume that the population in a qubit does not leak outside of its computational subspace. For many existing approaches, however, the physical qubits do possess more than two energy levels and consequently are prone to such leakage events. Analyzing the effects of leakage is therefore essential to devise optimal protocols for quantum gates, measurement, and error correction. In this article, we present a detailed study of leakage in a two-qubit superconducting stabilizer measurement circuit. We simulate the repeated ancilla-assisted measurement of a single ${\ensuremath{\sigma}}^{z}$ operator for a data qubit, record the outcome at the end of each measurement cycle, and explore the signature of leakage events in the obtained readout statistics. An analytic model is also developed that closely approximates the results of our numerical simulations. We find that leakage leads to destructive features in the quantum-error-detection scheme, making additional hardware and software protocols necessary.
Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into noncomputational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine quantum error correction (QEC) scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.
Abstract The leakage of quantum information out of the two computational states of a qubit into other energy states represents a major challenge for quantum error correction. During the operation of an error-corrected algorithm, leakage builds over time and spreads through multi-qubit interactions. This leads to correlated errors that degrade the exponential suppression of the logical error with scale, thus challenging the feasibility of quantum error correction as a path towards fault-tolerant quantum computation. Here, we demonstrate a distance-3 surface code and distance-21 bit-flip code on a quantum processor for which leakage is removed from all qubits in each cycle. This shortens the lifetime of leakage and curtails its ability to spread and induce correlated errors. We report a tenfold reduction in the steady-state leakage population of the data qubits encoding the logical state and an average leakage population of less than 1 × 10 −3 throughout the entire device. Our leakage removal process efficiently returns the system back to the computational basis. Adding it to a code circuit would prevent leakage from inducing correlated error across cycles. With this demonstration that leakage can be contained, we have resolved a key challenge for practical quantum error correction at scale.
Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multilevel structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement inaccuracy of 7×10^{-4} in approximately 50 ns with a low error of 2.5(1)×10^{-3} on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods that do not scale. Our approach does not require additional control electronics or on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.
Quantum computing can become scalable through error correction, but logical error rates only decrease with system size when physical errors are sufficiently uncorrelated. During computation, unused high energy levels of the qubits can become excited, creating leakage states that are long-lived and mobile. Particularly for superconducting transmon qubits, this leakage opens a path to errors that are correlated in space and time. Here, we report a reset protocol that returns a qubit to the ground state from all relevant higher level states. We test its performance with the bit-flip stabilizer code, a simplified version of the surface code for quantum error correction. We investigate the accumulation and dynamics of leakage during error correction. Using this protocol, we find lower rates of logical errors and an improved scaling and stability of error suppression with increasing qubit number. This demonstration provides a key step on the path towards scalable quantum computing.