© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2309.07060 · Physical Review Letters

Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits

Nathan Lacroix, Luca Hofele, Ants Remm, Othmane Benhayoune-Khadraoui, Alexander McDonald, Ross Shillito, Stefania Lazar, Christoph Hellings, François Swiadek, Dante Colao Zanuz, Alexander Flasby, Mohsen Bahrami Panah, Michael Kerschbaum, Graham J. Norris, Alexandre Blais, Andreas J. Wallraff, Sebastian Krinner

Published Mar 25, 2025• 29 citations

Abstract

Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multilevel structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement inaccuracy of 7×10^{-4} in approximately 50 ns with a low error of 2.5(1)×10^{-3} on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods that do not scale. Our approach does not require additional control electronics or on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.

DOI: 10.1103/physrevlett.134.120601

Related papers

All-Microwave Leakage Reduction Units for Quantum Error Correction with Superconducting Transmon Qubits

Jorge Marques, Hany A. Ali, Boris Varbanov +9 more

Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with up to 99% efficacy in 220 ns, with minimum impact on the qubit subspace. As a first application in the context of quantum error correction, we show how multiple simultaneous LRUs can reduce the error detection rate and suppress leakage buildup within 1% in data and ancilla qubits over 50 cycles of a weight-2 stabilizer measurement.

arXiv:2302.09876•Physical Review Letters•Jun 22, 2023•43 citations

Coupler-Assisted Leakage Reduction for Scalable Quantum Error Correction with Superconducting Qubits

Xiaohan Yang, Ji Chu, Zechen Guo +21 more

Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into noncomputational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine quantum error correction (QEC) scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.

arXiv:2403.16155•Physical Review Letters•Oct 24, 2024•21 citations

Hardware-Efficient Leakage-Reduction Scheme for Quantum Error Correction with Superconducting Transmon Qubits

Francesco Battistel, Boris Varbanov, Barbara M. Terhal

Leakage outside of the qubit computational subspace poses a threatening challenge to quantum error correction (QEC).We propose a scheme using two leakage-reduction units (LRUs) that mitigate these issues for a transmon-based surface code, without requiring an overhead in terms of hardware or QECcycle time as in previous proposals.For data qubits, we consider a microwave drive to transfer leakage to the readout resonator, where it quickly decays, ensuring that this negligibly disturbs the computational states for realistic system parameters.For ancilla qubits, we apply a |1 ↔ |2 π pulse conditioned on the measurement outcome.Using density-matrix simulations of the distance-3 surface code, we show that the average leakage lifetime is reduced to almost one QEC cycle, even when the LRUs are implemented with limited fidelity.Furthermore, we show that this leads to a significant reduction of the logical error rate.This LRU scheme opens the prospect for near-term scalable QEC demonstrations.

arXiv:2102.08336•PRX Quantum•Jul 26, 2021•46 citations

Leakage reduction in fast superconducting qubit gates via optimal control

M. Werninghaus, D. J. Egger, F. Roy +3 more

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

arXiv:2003.05952•npj Quantum Information•Jan 29, 2021•192 citations

Improved error correction with leakage reduction units built into qubit measurement in a superconducting quantum processor

Yuejie Xin, Sean L. M. van der Meer, Marc Serra-Peralta +5 more

Leakage to non-computational states is a source of correlated errors in both time and space that limits the effectiveness of quantum error correction (QEC) with superconducting circuits. We present and experimentally demonstrate a high-fidelity, leakage reduction unit (LRU) operating concurrently with transmon measurement without incurring time overhead. Adapted from double-drive reset of population (DDROP), the protocol utilizes simultaneous drives on the transmon and its readout resonator, leveraging the dispersive shift to create a directional process that returns the transmon to the computational subspace. The LRU achieves a 98.4% leakage removal fraction without compromising the computational-state assignment fidelity (99.2%). We combine LRU-enhanced measurement and neural-network decoding to successfully suppress logical error rates in both memory and stability QEC experiments without any post-selection.

quant-pharXiv:2511.17460•PRX Quantum•Nov 24, 2025•0 citations

Ultrafast Single Qubit Gates through Multi-Photon Transition Removal

Y. Gao, A. Galicia, J. D. Da Costa Jesus +12 more

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below $2.0\times10^{-5}$, and obtain fidelities above $99.98\%$ for pulse durations down to 6.8 ns for both $X$ and $X/2$ gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below $10^{-6}$. The presented approach can be readily applied to other qubit types as well.

quant-pharXiv:2511.22365•Nature Communications•Nov 28, 2025•0 citations

Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multilevel structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement inaccuracy of 7×10^{-4} in approximately 50 ns with a low error of 2.5(1)×10^{-3} on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods that do not scale. Our approach does not require additional control electronics or on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.

Minimizing leakage from computational states is a challenge when using many-level systems like superconducting quantum circuits as qubits. We realize and extend the quantum-hardware-efficient, all-microwave leakage reduction unit (LRU) for transmons in a circuit QED architecture proposed by Battistel et al. This LRU effectively reduces leakage in the second- and third-excited transmon states with up to 99% efficacy in 220 ns, with minimum impact on the qubit subspace. As a first application in the context of quantum error correction, we show how multiple simultaneous LRUs can reduce the error detection rate and suppress leakage buildup within 1% in data and ancilla qubits over 50 cycles of a weight-2 stabilizer measurement.

Superconducting qubits are a promising platform for building fault-tolerant quantum computers, with recent achievement showing the suppression of logical error with increasing code size. However, leakage into noncomputational states, a common issue in practical quantum systems including superconducting circuits, introduces correlated errors that undermine quantum error correction (QEC) scalability. Here, we propose and demonstrate a leakage reduction scheme utilizing tunable couplers, a widely adopted ingredient in large-scale superconducting quantum processors. Leveraging the strong frequency tunability of the couplers and stray interaction between the couplers and readout resonators, we eliminate state leakage on the couplers, thus suppressing space-correlated errors caused by population propagation among the couplers. Assisted by the couplers, we further reduce leakage to higher qubit levels with high efficiency (98.1%) and low error rate on the computational subspace (0.58%), suppressing time-correlated errors during QEC cycles. The performance of our scheme demonstrates its potential as an indispensable building block for scalable QEC with superconducting qubits.

Leakage outside of the qubit computational subspace poses a threatening challenge to quantum error correction (QEC).We propose a scheme using two leakage-reduction units (LRUs) that mitigate these issues for a transmon-based surface code, without requiring an overhead in terms of hardware or QECcycle time as in previous proposals.For data qubits, we consider a microwave drive to transfer leakage to the readout resonator, where it quickly decays, ensuring that this negligibly disturbs the computational states for realistic system parameters.For ancilla qubits, we apply a |1 ↔ |2 π pulse conditioned on the measurement outcome.Using density-matrix simulations of the distance-3 surface code, we show that the average leakage lifetime is reduced to almost one QEC cycle, even when the LRUs are implemented with limited fidelity.Furthermore, we show that this leads to a significant reduction of the logical error rate.This LRU scheme opens the prospect for near-term scalable QEC demonstrations.

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

Leakage to non-computational states is a source of correlated errors in both time and space that limits the effectiveness of quantum error correction (QEC) with superconducting circuits. We present and experimentally demonstrate a high-fidelity, leakage reduction unit (LRU) operating concurrently with transmon measurement without incurring time overhead. Adapted from double-drive reset of population (DDROP), the protocol utilizes simultaneous drives on the transmon and its readout resonator, leveraging the dispersive shift to create a directional process that returns the transmon to the computational subspace. The LRU achieves a 98.4% leakage removal fraction without compromising the computational-state assignment fidelity (99.2%). We combine LRU-enhanced measurement and neural-network decoding to successfully suppress logical error rates in both memory and stability QEC experiments without any post-selection.

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below

2.0\times10^{-5}

, and obtain fidelities above

99.98\%

for pulse durations down to 6.8 ns for both

X

and

X/2

gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below

10^{-6}

. The presented approach can be readily applied to other qubit types as well.