Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1403.6914 · Superconductor Science and Technology

Microwave nonlinearity and photoresponse of superconducting resonators with columnar defect micro-channels

Stephen K. Remillard, D Kirkendall, G. Ghigo, Roberto Gerbaldo, L. Gozzelino, F. Laviano, Z Yang, Nathan Mendelsohn, Behnood G. Ghamsari, Barry Friedman, P. Jung, Steven M. Anlage

Published Aug 12, 2014• 11 citations
arXivHTMLPDF

Abstract

Micro-channels of nanosized columnar tracks were planted by heavy-ion irradiation into superconducting microwave microstrip resonators that were patterned from YBa2Cu3O7-x thin films on LaAlO3 substrates. Three different ion fluences were used, producing different column densities, with each fluence having a successively greater impact on the nonlinearity of the device, as compared to a control sample. Photoresponse images made with a 638 nm rastered laser beam revealed that the channel is a location of enhanced photoresponse and a hot spot for the generation of intermodulation distortion. The microwave photoresponse technique was also advanced in this work by investigating the role of coupling strength on the distribution of photoresponse between inductive and resistive components.

DOI
10.1088/0953-2048/27/9/095006

Related papers

Heavy-Ion Patterned Micro-Channels in YBCO Microwave Resonators

G. Ghigo, Roberto Gerbaldo, L. Gozzelino +1 more

Microcollimated swift heavy-ion irradiation has been employed to carve channels with micron-sized width in YBa2Cu3O7-x(YBCO) superconducting coplanar microwave resonators. Comparative analysis of the first two resonant modes as a function of temperature, magnetic field, and input power was used to characterize the properties of the microchannels. As expected, due to the high fluence, increase of penetration depth and microwave resistivity have been found in the irradiated channels. It is shown that the microchannels can be driven into a highly dissipative and nonlinear regime while the rest of the resonator still persists in a low-dissipation and linear state. Thus, an external control signal (e.g., a small dc magnetic field) can tune the response of the resonator, in the modes coupled to the microchannel, when properly biased. This study is preliminary to the employment of such approach in the design of novel YBCO sensors operating above 77 K.

IEEE Transactions on Applied Superconductivity•Feb 26, 2013•5 citations

Influence of LaAlO3 surface topography on rf current distribution in superconducting microwave devices

Alexander P. Zhuravel, Alexey Vladimirovich Ustinov, K. Solomon Harshavardhan +1 more

A laser scanning microscope with a thermal spot size of about 4 μm is used to measure a quantity proportional to the rf current density in an operating superconducting coplanar waveguide microwave resonator. The twinning of the LaAlO3 substrate produces a meandering of the current at the edges due to irregularities in the wet etching of the YBa2Cu3O7−δ film associated with substrate twin domain blocks, and an (∼20%) enhancement of the rf photoresponse at these locations. These irregularities are candidates for enhanced nonlinear response from the device.

arXiv:cond-mat/0209614•Applied Physics Letters•Dec 19, 2002•33 citations

Intermodulation measurements in Nb superconducting microstrip resonators

R. Monaco, A. Andreone, F. Palomba

The issue of intermodulation distortion in superconducting devices for rf and microwave applications is discussed. The classical frequency conversion theory for nonlinear two-port devices in the small signal limit is shown to apply to microstrip resonators regardless of their geometry and material. Two tone, third order intermodulation measurements allow more sensitive detection of nonlinearity compared to surface impedance measurements, provided a low noise, spurious free experimental setup is adopted. Measurements carried out on high quality Nb meanderline microstrip resonators show that at very low power level nonlinearity is dominated by intrinsic device properties. Film defects start to play a predominant role above a critical power level that strongly depends on the defect’s nature.

Journal of Applied Physics•Sep 1, 2000•23 citations

Bending and Bifurcation of a Superconductor Resonator with Engineered Nonlinearity

Alec Nelson

This experiment is designed to compare the feedback from an altered superconductor resonator with a conventional, unaltered superconductor resonator. Superconducting transmission lines are patterned on a lanthanum aluminium substrate chip with a geometry that resonates within the microwave range. Nonlinearities, distortion of the signals in the superconductor, can be engineered into the transmission line using an ion beam or other artificial source of radiation. The sample in this experiment, thin-film yttrium barium copper oxide: YBCO was sent to a facility in Italy to be engineered with a nonlinearity and then characterized in a low temperature (77 K) cryostat. This means that the power dependence of a traditional resonator will differ greatly from this sample. Two key figures of merit of superconducting resonators are their critical power, where the power input to the resonator is most absorbed, and critical frequency of the sample, the frequency at which the critical power occurs. Both were found to vary with temperature, and at high incident power the frequency response of the resonator begins to experience deformation. The change of the power response as frequency is swept through (bending) and the hysteresis in the curve (bifurcation) form the core disparities between traditional superconducting resonators and those with engineered nonlinearities.

•Jan 1, 2016•0 citations

Imaging of microwave intermodulation fields in a superconducting microstrip resonator

Wensheng Hu, Ashfaq S. Thanawalla, B. Johan Feenstra +2 more

Nonlinearities give rise to intermodulation distortion in superconducting microwave devices and currently limit their use to low power applications. We have developed a cryogenic imaging technique to spatially resolve intermodulation distortion and used it to image an 8.2 GHz high temperature superconducting Tl2Ba2CaCu2O8 microwave resonator. The images reveal that the fundamental and intermodulation electric fields obey a fixed relation throughout the device. We note that further refinements of intermodulation theory in resonant devices may be required to fully describe the data.

Applied Physics Letters•Nov 1, 1999•22 citations

Imaging local sources of intermodulation in superconducting microwave devices

Alexander P. Zhuravel, Alexey Vladimirovich Ustinov, D. Abraimov +1 more

This work presents new experimental results on low-temperature (LT) characterization of local RF properties of passive superconducting (SC) microwave devices using a novel laser scanning microscope (LSM). In this technique, a modulated laser beam is focused onto and scanned over the surface of a resonant SC device to probe the spatial distribution of RF current. The highly localized photo-induced change of the kinetic inductance of the SC device produces both a shift of the resonant frequency f/sub 0/ and change of the quality factor Q. An image of these changes is recorded as the laser spot is scanned over the device. We present the first measurements of spatially resolved intermodulation response in a high temperature superconducting (HTS) co-planar waveguide resonator, opening up a new window into the local origins of nonlinearity in the HTS materials.

arXiv:cond-mat/0211191•IEEE Transactions on Applied Superconductivity•Jun 1, 2003•22 citations
Micro-channels of nanosized columnar tracks were planted by heavy-ion irradiation into superconducting microwave microstrip resonators that were patterned from YBa2Cu3O7-x thin films on LaAlO3 substrates. Three different ion fluences were used, producing different column densities, with each fluence having a successively greater impact on the nonlinearity of the device, as compared to a control sample. Photoresponse images made with a 638 nm rastered laser beam revealed that the channel is a location of enhanced photoresponse and a hot spot for the generation of intermodulation distortion. The microwave photoresponse technique was also advanced in this work by investigating the role of coupling strength on the distribution of photoresponse between inductive and resistive components.
Microcollimated swift heavy-ion irradiation has been employed to carve channels with micron-sized width in YBa2Cu3O7-x(YBCO) superconducting coplanar microwave resonators. Comparative analysis of the first two resonant modes as a function of temperature, magnetic field, and input power was used to characterize the properties of the microchannels. As expected, due to the high fluence, increase of penetration depth and microwave resistivity have been found in the irradiated channels. It is shown that the microchannels can be driven into a highly dissipative and nonlinear regime while the rest of the resonator still persists in a low-dissipation and linear state. Thus, an external control signal (e.g., a small dc magnetic field) can tune the response of the resonator, in the modes coupled to the microchannel, when properly biased. This study is preliminary to the employment of such approach in the design of novel YBCO sensors operating above 77 K.
A laser scanning microscope with a thermal spot size of about 4 μm is used to measure a quantity proportional to the rf current density in an operating superconducting coplanar waveguide microwave resonator. The twinning of the LaAlO3 substrate produces a meandering of the current at the edges due to irregularities in the wet etching of the YBa2Cu3O7−δ film associated with substrate twin domain blocks, and an (∼20%) enhancement of the rf photoresponse at these locations. These irregularities are candidates for enhanced nonlinear response from the device.
The issue of intermodulation distortion in superconducting devices for rf and microwave applications is discussed. The classical frequency conversion theory for nonlinear two-port devices in the small signal limit is shown to apply to microstrip resonators regardless of their geometry and material. Two tone, third order intermodulation measurements allow more sensitive detection of nonlinearity compared to surface impedance measurements, provided a low noise, spurious free experimental setup is adopted. Measurements carried out on high quality Nb meanderline microstrip resonators show that at very low power level nonlinearity is dominated by intrinsic device properties. Film defects start to play a predominant role above a critical power level that strongly depends on the defect’s nature.
This experiment is designed to compare the feedback from an altered superconductor resonator with a conventional, unaltered superconductor resonator. Superconducting transmission lines are patterned on a lanthanum aluminium substrate chip with a geometry that resonates within the microwave range. Nonlinearities, distortion of the signals in the superconductor, can be engineered into the transmission line using an ion beam or other artificial source of radiation. The sample in this experiment, thin-film yttrium barium copper oxide: YBCO was sent to a facility in Italy to be engineered with a nonlinearity and then characterized in a low temperature (77 K) cryostat. This means that the power dependence of a traditional resonator will differ greatly from this sample. Two key figures of merit of superconducting resonators are their critical power, where the power input to the resonator is most absorbed, and critical frequency of the sample, the frequency at which the critical power occurs. Both were found to vary with temperature, and at high incident power the frequency response of the resonator begins to experience deformation. The change of the power response as frequency is swept through (bending) and the hysteresis in the curve (bifurcation) form the core disparities between traditional superconducting resonators and those with engineered nonlinearities.
Nonlinearities give rise to intermodulation distortion in superconducting microwave devices and currently limit their use to low power applications. We have developed a cryogenic imaging technique to spatially resolve intermodulation distortion and used it to image an 8.2 GHz high temperature superconducting Tl2Ba2CaCu2O8 microwave resonator. The images reveal that the fundamental and intermodulation electric fields obey a fixed relation throughout the device. We note that further refinements of intermodulation theory in resonant devices may be required to fully describe the data.
This work presents new experimental results on low-temperature (LT) characterization of local RF properties of passive superconducting (SC) microwave devices using a novel laser scanning microscope (LSM). In this technique, a modulated laser beam is focused onto and scanned over the surface of a resonant SC device to probe the spatial distribution of RF current. The highly localized photo-induced change of the kinetic inductance of the SC device produces both a shift of the resonant frequency f/sub 0/ and change of the quality factor Q. An image of these changes is recorded as the laser spot is scanned over the device. We present the first measurements of spatially resolved intermodulation response in a high temperature superconducting (HTS) co-planar waveguide resonator, opening up a new window into the local origins of nonlinearity in the HTS materials.