Passive decoy-state quantum key distribution (QKD) systems, proven to be more desirable than the active ones in some scenarios, also have the problem of device imperfections like intensity fluctuations. In this paper, the formula of key generation rate of the passive decoy-state protocol using the weak coherent pulse (WCP) source with intensity fluctuation is given, and then the influence of intensity fluctuations on the performance of the passive decoy-state protocol is rigorously characterized. From numerical simulations, it can be seen that intensity fluctuations have non-negligible influence on the performance of the passive decoy-state QKD protocol with WCP source. Most importantly, our simulations show that, under the same deviation of intensity fluctuations, the passive decoy-state method performs better than the active one decoy-state method and is close to the active vacuum + weak decoy-state method.
Passive decoy-state quantum key distribution (QKD) systems, proven to be more desirable than the active ones in some scenarios, also have the problem of device imperfections like intensity fluctuations. In this paper, the formula of key generation rate of the passive decoy-state protocol using the weak coherent pulse (WCP) source with intensity fluctuation is given, and then the influence of intensity fluctuations on the performance of the passive decoy-state protocol is rigorously characterized. From numerical simulations, it can be seen that intensity fluctuations have non-negligible influence on the performance of the passive decoy-state QKD protocol with WCP source. Most importantly, our simulations show that, under the same deviation of intensity fluctuations, the passive decoy-state method performs better than the active one decoy-state method and is close to the active vacuum + weak decoy-state method.
Passive decoy-state quantum key distribution is more desirable than the active one in some scenarios. It is also affected by the imperfections of the devices. In this paper, the influence of modulator attenuation on the passive decoy-state method is considered. We introduce and analyze the unbalanced Mach–Zehnder interferometer, briefly, and combining with the virtual source and imaginary unitary transformation, we characterize the passive decoy-state method using a weak coherent photon source with modulator attenuation. According to the attenuation parameter δ , the pass efficiencies are given. Then, the key generation rate can be acquired. From numerical simulations, it can be seen that modulator attenuation has a nonnegligible influence on the performance of passive-state QKD protocol. Based on the research, the analysis method of virtual source and imaginary unitary transformation are preferred in analyzing passive decoy state protocol, and the passive decoy-state method is better than the active one and is close to the active vacuum + weak decoy state under the condition of having the same modulator attenuation.
Passive decoy-state quantum key distribution systems, proven to be more desirable than active ones in some scenarios, also have the problem of device imperfections like finite-length keys. In this paper, based on the WCP source which can be used for the passive decoy-state method, we obtain the expressions of single-photon error rates, single-photon counts, and phase error rates. According to the information of smooth min-entropy, we calculate the key generation rate under the condition of finite-length key. Key generation rates with different numbers of pulses are compared by numerical simulations. From the results, it can be seen that the passive decoy-state method can have good results if the total number of pulses reaches 10 10 . We also simulate the passive decoy-state method with different probabilities of choosing a pulse for parameter estimation when the number of pulses is fixed.
Decoy states have been proven to be a very useful method for significantly enhancing the performance of quantum key distribution systems with practical light sources. Although active modulation of the intensity of the laser pulses is an effective way of preparing decoy states in principle, in practice passive preparation might be desirable in some scenarios. Typical passive schemes involve parametric down-conversion. More recently, it has been shown that phase-randomized weak coherent pulses (WCP) can also be used for the same purpose [M. Curty et al., Opt. Lett. 34, 3238 (2009).] This proposal requires only linear optics together with a simple threshold photon detector, which shows the practical feasibility of the method. Most importantly, the resulting secret key rate is comparable to the one delivered by an active decoy-state setup with an infinite number of decoy settings. In this article we extend these results, now showing specifically the analysis for other practical scenarios with different light sources and photodetectors. In particular, we consider sources emitting thermal states, phase-randomized WCP, and strong coherent light in combination with several types of photodetectors, like, for instance, threshold photon detectors, photon number resolving detectors, and classical photodetectors. Our analysis includes as well the effect that detection inefficiencies and noise in the form of dark counts shown by current threshold detectors might have on the final secret key rate. Moreover, we provide estimations on the effects that statistical fluctuations due to a finite data size can have in practical implementations.
Measurement-device-independent quantum key distribution (MDI-QKD) with the active decoy state method can remove all detector loopholes, and resist the imperfections of sources. But it may lead to side channel attacks and break the security of QKD system. In this paper, we apply the passive decoy state method to the MDI-QKD based on polarization encoding mode. Not only all attacks on detectors can be removed, but also the side channel attacks on sources can be overcome. We get that the MDI-QKD with our passive decoy state method can have a performance comparable to the protocol with the active decoy state method. To fit for the demand of practical application, we discuss intensity fluctuation in the security analysis of MDI-QKD protocol using passive decoy state method, and derive the key generation rate for our protocol with intensity fluctuation. It shows that intensity fluctuation has an adverse effect on the key generation rate which is non-negligible, especially in the case of small data size of total transmitting signals and long distance transmission. We give specific simulations on the relationship between intensity fluctuation and the key generation rate. Furthermore, the statistical fluctuation due to the finite length of data is also taken into account.
Decoy states have recently been proposed as a useful protocol for substantially improving the performance of quantum key distribution (QKD). The passive decoy-state protocol has the advantage of easier implementation, higher transmission rate and better security compared with the active decoy-state protocol. This paper analyzes the passive decoy-state protocol with different light sources, including the lastest passive state protocol with weak coherent state (WCS) and the simple passive state protocol (AYKI) with heralded single photon source (HSPS). Based on the theoretic discussion and numerical simulation, we obtain the conclusion that the passive decoy-state protocol with HSPS is easier to implement than the passive decoy-state protocol with WCS because the latter need a hardware change but the former dose not involve any hardware change on the statnard QKD scheme. The key generation rate of the passive decoy-state protocol with WCS is better than that of the passive decoy-state protocol with HSPS, but the transmission distance is less than the latter. Anyhow, the performance of the passive scheme with a threshold detector is close to the active one.
In this paper, we present a scheme on realizing the passive decoy-state quantum key distribution. In this scheme, two weak coherent pulses interfere at a beam-splitter, and pulses in one output port are split by one beam-splitter into two parts which are sent into two local detectors individually. Then, all the clicking and nonclicking events from the local detectors are used to herald the arriving and nonarriving of the signal pulse in the other output port. Accordingly, we can obtain more decoy states in the photon-number space and can thus, achieve more precise estimations for single-photon contributions. In this scheme, we use only one intensity at each input of the beam-splitter to avoid intensity modulation fluctuations existing in other active decoy-state methods. We compare the present scheme with Curty et al.'s passive scheme and the conventional three-intensity decoy-state scheme with the weak coherent sources. Through numerical simulations, we demonstrate that this scheme is better than the other two methods.