Analog quantum simulators can be used to study quantum correlation in novel many-body systems by emulating the Hamiltonian of these systems. One essential question in quantum simulation is to probe the properties of an emulated many-body system. Here we present a circuit QED scheme for probing such properties by measuring the spectrum of a superconducting resonator coupled to a quantum simulator. We first study a general framework of this approach and show that the spectrum of the resonator is directly related to the correlation function of the coupling operator between the resonator and the simulator. We then apply this scheme to a simulator of the transverse field Ising model implemented with superconducting qubits, where the resonance peaks in the resonator spectrum correspond to the frequencies of the elementary excitations. The effects of resonator damping, qubit decoherence, and resonator backaction are also discussed. This setup can be used to probe a broad range of many-body models.
Analog quantum simulators can be used to study quantum correlation in novel many-body systems by emulating the Hamiltonian of these systems. One essential question in quantum simulation is to probe the properties of an emulated many-body system. Here we present a circuit QED scheme for probing such properties by measuring the spectrum of a superconducting resonator coupled to a quantum simulator. We first study a general framework of this approach and show that the spectrum of the resonator is directly related to the correlation function of the coupling operator between the resonator and the simulator. We then apply this scheme to a simulator of the transverse field Ising model implemented with superconducting qubits, where the resonance peaks in the resonator spectrum correspond to the frequencies of the elementary excitations. The effects of resonator damping, qubit decoherence, and resonator backaction are also discussed. This setup can be used to probe a broad range of many-body models.
This paper presents a concept for a quantum simulator based on a superconducting qubit coupled to a readout resonator, designed to experimentally emulate the band structure of a one-dimensional crystal. The superconducting qubit, with its intrinsic periodic potential from the Josephson effect, serves as a direct analog of an electron in a periodic lattice. The Hamiltonian of the system is analyzed in two complementary regimes: the weak-coupling regime, corresponding to nearly free electrons, and the strong-coupling regime, corresponding to electrons in the tight-binding limit. We show that the system can be continuously swept between these regimes using a flux-tunable symmetric DC-SQUID to vary the effective Josephson energy. To probe the resulting band structure, we propose an experimental method based on two-tone spectroscopy, which maps the qubit's flux-dependent transition spectrum via the dispersive shift of a coupled resonator. Numerical simulations confirm the feasibility of this approach, visualizing the transition from a broad band dispersion in the weak-coupling limit to exponentially narrow bands in the strong-coupling limit. This platform demonstrates how tunable superconducting circuits can be used as versatile quantum simulators for fundamental solid-state physics phenomena.
Gate-based digital quantum simulations offer an exciting new paradigm for studying the many-body physics of strongly correlated systems. In this context, electron-phonon models are challenging for qubit-only quantum simulators, as bosonic degrees of freedom require costly finite-dimensional encodings. Here, we elaborate on an alternative approach based on a digital-analog circuit QED architecture, where fermions are encoded in transmon qubits while bosons are represented directly by microwave resonators. The central building block of this framework is a qubit-resonator Rabi gate that emulates strong electron-phonon coupling and can be implemented through a sequence of resonant Jaynes-Cummings gates interleaved with layers of single-qubit rotations. Using this Rabi gate as the fundamental unitary operation, we construct quantum circuits for the Hubbard-Holstein and Yukawa-Sachdev-Ye-Kitaev models, which describe, respectively, strongly correlated electrons coupled to phonons and phonon-mediated interactions among Majorana fermions. We further demonstrate how nonclassical phonon physics and signatures of quantum chaos in these models can be probed through circuit simulations, and develop measurement and variational protocols tailored to near-term superconducting quantum hardware.
Metamaterial resonant structures made from arrays of superconducting lumped-circuit elements can exhibit microwave-mode spectra with left-handed dispersion for the standing-wave resonances, resulting in a high density of modes in the same frequency range where superconducting qubits are typically operated, as well as a bandgap at lower frequencies that extends down to dc. Using this regime for multimode circuit quantum electrodynamics, we perform a series of measurements of such a superconducting metamaterial resonator coupled to a flux-tunable transmon qubit. Through microwave measurements of the metamaterial, we observe the coupling of the qubit to each of the modes that it passes through. Using a separate readout resonator, we probe the qubit dispersively and characterize the qubit energy relaxation as a function of frequency, which is strongly affected by the Purcell effect in the presence of the dense mode spectrum. Additionally, we investigate the ac Stark shift of the qubit as the photon number in the various metamaterial modes is varied. Through numerical simulations, we explore designs based on this scheme with enhanced coupling so that the coupling energy between the qubit and the metamaterial modes can exceed the intermode spacing in future devices with achievable circuit parameters. The ability to tailor the dense mode spectrum through the choice of circuit parameters and manipulate the photonic state of the metamaterial through interactions with qubits makes this a promising platform for analog quantum simulation with microwave photons and quantum memories.
Recent advances in superconducting circuit technology have made the fabrication of large, customizable circuits routine. This has led to applications beyond quantum information, including quantum simulation. A key challenge in this effort is the identification of the quantum states realized. Here, we propose a probe circuit capable of measuring many-body correlations in an analog quantum simulator superconducting circuit. This probe, which is specially designed for many-photon states, exploits the nonlinearity of the Josephson junction to measure two-point correlation functions of the superconducting phase operator. We demonstrate the capabilities of this design in the context of an LC-ladder with a quantum impurity. The proposed probe allows for the measurement of inherently quantum correlations, such as two-mode squeezing, and it has the potential to significantly expand the scope of analog quantum simulations using superconducting circuits.
Superconducting resonators with high quality factors are extremely sensitive detectors of the complex impedance of materials and devices coupled to them. This capability has been used to measure losses in multiple different materials and, in the case of circuit quantum electrodynamics (circuit QED), has been used to measure the coherent evolution of multiple different types of qubits. Here, we report on the implementation of a scanning resonator for probing quantum coherent devices. Our scanning setup enables tunable coherent coupling to systems of interest without the need for fabricating on-chip superconducting resonators. We measure the internal quality factor of our resonator sensor in the single-photon regime to be >104 and demonstrate capacitive imaging using our sensor with zeptoFarad sensitivity and micron spatial resolution at milliKelvin temperatures. We then use our setup to characterize the energy spectrum and coherence times of multiple transmon qubits with no on-chip readout circuitry. Our experiments introduce a new tool for using circuit QED to measure existing and proposed qubit platforms.
Superconducting quantum circuit models are widely used to understand superconducting devices. This thesis consists of four studies wherein the superconducting quantum circuit is used to illustrate challenges related to quantum information encoding and processing, quantum simulation, quantum signal detection and amplification.The existence of scalar Aharanov-Bohm phase has been a controversial topic for decades. Scalar AB phase, defined as time integral of electric potential, gives rises to an extra phase factor in wavefunction. We proposed a superconducting quantum Faraday cage to detect temporal interference effect as a consequence of scalar AB phase. Using the superconducting quantum circuit model, the physical system is solved and resulting AB effect is predicted. Further discussion in this chapter shows that treating the experimental apparatus quantum mechanically, spatial scalar AB effect, proposed by Aharanov-Bohm, can't be observed. Either a decoherent interference apparatus is used to observe spatial scalar AB effect, or a quantum Faraday cage is used to observe temporal scalar AB effect.The second study involves protecting a quantum system from losing coherence, which is crucial to any practical quantum computation scheme. We present a theory to encode any qubit, especially superconducting qubits, into a universal quantum degeneracy point (UQDP) where low frequency noise is suppressed significantly. Numerical simulations for superconducting charge qubit using experimental parameters show that its coherence time is prolong by two orders of magnitude using our universal degeneracy point approach. With this improvement, a set of universal quantum gates can be performed at high fidelity without losing too much quantum coherence.Starting in 2004, the use of circuit QED has enabled the manipulation of superconducting qubits with photons. We applied quantum optical approach to model coupled resonators and obtained a four-wave mixing toolbox to operate photons states. The model and toolbox are engineered with a superconducting quantum circuit where two superconducting resonators are coupled via the UQDP circuit. Using fourth order perturbation theory one can realize a complete set of quantum operations between these two photon modes. This helps open a new field to treat photon modes as qubits. Additional, a three-wave mixing scheme using phase qubits permits one to engineer the coupling Hamiltonian using a phase qubit as a tunable coupler.Along with Feynman's idea using quantum to simulate quantum, superconducting quantum simulators have been studied intensively recently. Taking the advantage of mesoscopic size of superconducting circuit and local tunability, we came out the idea to simulate quantum phase transition due to disorder. Our first paper was to propose a superconducting quantum simulator of Bose-Hubbard model to do site-wise manipulation and observe Mott-insulator to superfluid phase transition. The side-band cooling of an array of superconducting resonators is solved after the paper was published. In light of the developed technology in manipulating quantum information with superconducting circuit, one can couple other quantum oscillator system to superconducting resonators in order manipulation of its quantum states or parametric amplification of weak quantum signal. A theory that works for different coupling schemes has been studied in chapter 5. This will be a platform for further research.