Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1308.6642 · Physical Review A

Coping with qubit leakage in topological codes

Austin G. Fowler

Published Oct 8, 2013• 108 citations
arXivHTMLPDF

Abstract

Many physical systems considered promising qubit candidates are not, in fact, two-level systems. Such systems can leak out of the preferred computational states, leading to errors on any qubits that interact with leaked qubits. Without specific methods of dealing with leakage, long-lived leakage can lead to time-correlated errors. We study the impact of such time-correlated errors on topological quantum error correction codes, which are considered highly practical codes, using the repetition code as a representative case study. We show that, under physically reasonable assumptions, a threshold error rate still exists; however, performance is significantly degraded. We then describe simple additional quantum circuitry that, when included in the error detection cycle, restores performance to acceptable levels.

DOI
10.1103/physreva.88.042308

Related papers

Overcoming leakage in quantum error correction

Kevin C. Miao, Matt McEwen, Juan Atalaya +97 more

Abstract The leakage of quantum information out of the two computational states of a qubit into other energy states represents a major challenge for quantum error correction. During the operation of an error-corrected algorithm, leakage builds over time and spreads through multi-qubit interactions. This leads to correlated errors that degrade the exponential suppression of the logical error with scale, thus challenging the feasibility of quantum error correction as a path towards fault-tolerant quantum computation. Here, we demonstrate a distance-3 surface code and distance-21 bit-flip code on a quantum processor for which leakage is removed from all qubits in each cycle. This shortens the lifetime of leakage and curtails its ability to spread and induce correlated errors. We report a tenfold reduction in the steady-state leakage population of the data qubits encoding the logical state and an average leakage population of less than 1 × 10 −3 throughout the entire device. Our leakage removal process efficiently returns the system back to the computational basis. Adding it to a code circuit would prevent leakage from inducing correlated error across cycles. With this demonstration that leakage can be contained, we have resolved a key challenge for practical quantum error correction at scale.

arXiv:2211.04728•Nature Physics•Oct 5, 2023•119 citations

Removing leakage-induced correlated errors in superconducting quantum error correction

M. McEwen, D. Kafri, Z. Chen +48 more

Quantum computing can become scalable through error correction, but logical error rates only decrease with system size when physical errors are sufficiently uncorrelated. During computation, unused high energy levels of the qubits can become excited, creating leakage states that are long-lived and mobile. Particularly for superconducting transmon qubits, this leakage opens a path to errors that are correlated in space and time. Here, we report a reset protocol that returns a qubit to the ground state from all relevant higher level states. We test its performance with the bit-flip stabilizer code, a simplified version of the surface code for quantum error correction. We investigate the accumulation and dynamics of leakage during error correction. Using this protocol, we find lower rates of logical errors and an improved scaling and stability of error suppression with increasing qubit number. This demonstration provides a key step on the path towards scalable quantum computing.

arXiv:2102.06131•Nature Communications•Mar 19, 2021•166 citations

Quantifying the effects of local many-qubit errors and nonlocal two-qubit errors on the surface code

Austin G. Fowler, John M. Martinis

Topological quantum error correction codes are known to be able to tolerate arbitrary local errors given sufficient qubits. This includes correlated errors involving many local qubits. In this work, we quantify this level of tolerance, numerically studying the effects of many-qubit errors on the performance of the surface code. We find that if increasingly large-area errors are at least moderately exponentially suppressed, arbitrarily reliable quantum computation can still be achieved with practical overhead. We furthermore quantify the effect of nonlocal two-qubit correlated errors, which would be expected in arrays of qubits coupled by a polynomially decaying interaction, and when using many-qubit coupling devices. We surprisingly find that the surface code is very robust to this class of errors, despite a provable lack of a threshold error rate when such errors are present.

arXiv:1401.2466•Physical Review A•Mar 12, 2014•52 citations

Handling leakage with subsystem codes

Natalie C. Brown, Michael Newman, Kenneth R. Brown

Abstract Leakage is a particularly damaging error that occurs when a qubit state falls out of its two-level computational subspace. Compared to independent depolarizing noise, leaked qubits may produce many more configurations of harmful correlated errors during error-correction. In this work, we investigate different local codes in the low-error regime of a leakage gate error model. When restricting to bare-ancilla extraction, we observe that subsystem codes are good candidates for handling leakage, as their locality can limit damaging correlated errors. As a case study, we compare subspace surface codes to the subsystem surface codes introduced by Bravyi et al. In contrast to depolarizing noise, subsystem surface codes outperform same-distance subspace surface codes below error rates as high as ⪅ 7.5 × 10−4 while offering better per-qubit distance protection. Furthermore, we show that at low to intermediate distances, Bacon–Shor codes offer better per-qubit error protection against leakage in an ion-trap motivated error model below error rates as high as ⪅ 1.2 × 10−3. For restricted leakage models, this advantage can be extended to higher distances by relaxing to unverified two-qubit cat state extraction in the surface code. These results highlight an intrinsic benefit of subsystem code locality to error-corrective performance.

arXiv:1903.03937•New Journal of Physics•Jul 1, 2019•33 citations

Analytic asymptotic performance of topological codes

Austin G. Fowler

Topological quantum error-correction codes are extremely practical, typically requiring only a two-dimensional lattice of qubits with tunable nearest-neighbor interactions yet tolerating high physical error rates $p$. It is computationally expensive to simulate the performance of such codes at low $p$, yet this is a regime we wish to study as low physical error rates lead to low qubit overhead. We present a very general method of analytically estimating the low-$p$ performance of the most promising class of topological codes. Our method can handle arbitrary periodic quantum circuits implementing the error detection associated with this class of codes, and arbitrary Pauli error models for each type of quantum gate. Our analytic expressions take only seconds to obtain, versus hundreds of hours to perform equivalent low-$p$ simulations.

arXiv:1208.1334•Physical Review A•Apr 2, 2013•29 citations

Leakage-resilient approach to fault-tolerant quantum computing with superconducting elements

Joydip Ghosh, Austin G. Fowler

Superconducting qubits, while promising for scalability and long coherence times, contain more than two energy levels, and therefore are susceptible to errors generated by the leakage of population outside of the computational subspace. Such leakage errors constitute a prominent roadblock towards fault-tolerant quantum computing (FTQC) with superconducting qubits. FTQC using topological codes is based on sequential measurements of multiqubit stabilizer operators. Here, we first propose a leakage-resilient procedure to perform repetitive measurements of multiqubit stabilizer operators, and then use this scheme as an ingredient to develop a leakage-resilient approach for surface code quantum error correction with superconducting circuits. Our protocol is based on swap operations between data and ancilla qubits at the end of every cycle, requiring read-out and reset operations on every physical qubit in the system, and thereby preventing persistent leakage errors from occurring.

arXiv:1406.2404•Physical Review A•Feb 20, 2015•44 citations
Many physical systems considered promising qubit candidates are not, in fact, two-level systems. Such systems can leak out of the preferred computational states, leading to errors on any qubits that interact with leaked qubits. Without specific methods of dealing with leakage, long-lived leakage can lead to time-correlated errors. We study the impact of such time-correlated errors on topological quantum error correction codes, which are considered highly practical codes, using the repetition code as a representative case study. We show that, under physically reasonable assumptions, a threshold error rate still exists; however, performance is significantly degraded. We then describe simple additional quantum circuitry that, when included in the error detection cycle, restores performance to acceptable levels.
Abstract The leakage of quantum information out of the two computational states of a qubit into other energy states represents a major challenge for quantum error correction. During the operation of an error-corrected algorithm, leakage builds over time and spreads through multi-qubit interactions. This leads to correlated errors that degrade the exponential suppression of the logical error with scale, thus challenging the feasibility of quantum error correction as a path towards fault-tolerant quantum computation. Here, we demonstrate a distance-3 surface code and distance-21 bit-flip code on a quantum processor for which leakage is removed from all qubits in each cycle. This shortens the lifetime of leakage and curtails its ability to spread and induce correlated errors. We report a tenfold reduction in the steady-state leakage population of the data qubits encoding the logical state and an average leakage population of less than 1 × 10 −3 throughout the entire device. Our leakage removal process efficiently returns the system back to the computational basis. Adding it to a code circuit would prevent leakage from inducing correlated error across cycles. With this demonstration that leakage can be contained, we have resolved a key challenge for practical quantum error correction at scale.
Quantum computing can become scalable through error correction, but logical error rates only decrease with system size when physical errors are sufficiently uncorrelated. During computation, unused high energy levels of the qubits can become excited, creating leakage states that are long-lived and mobile. Particularly for superconducting transmon qubits, this leakage opens a path to errors that are correlated in space and time. Here, we report a reset protocol that returns a qubit to the ground state from all relevant higher level states. We test its performance with the bit-flip stabilizer code, a simplified version of the surface code for quantum error correction. We investigate the accumulation and dynamics of leakage during error correction. Using this protocol, we find lower rates of logical errors and an improved scaling and stability of error suppression with increasing qubit number. This demonstration provides a key step on the path towards scalable quantum computing.
Topological quantum error correction codes are known to be able to tolerate arbitrary local errors given sufficient qubits. This includes correlated errors involving many local qubits. In this work, we quantify this level of tolerance, numerically studying the effects of many-qubit errors on the performance of the surface code. We find that if increasingly large-area errors are at least moderately exponentially suppressed, arbitrarily reliable quantum computation can still be achieved with practical overhead. We furthermore quantify the effect of nonlocal two-qubit correlated errors, which would be expected in arrays of qubits coupled by a polynomially decaying interaction, and when using many-qubit coupling devices. We surprisingly find that the surface code is very robust to this class of errors, despite a provable lack of a threshold error rate when such errors are present.
Abstract Leakage is a particularly damaging error that occurs when a qubit state falls out of its two-level computational subspace. Compared to independent depolarizing noise, leaked qubits may produce many more configurations of harmful correlated errors during error-correction. In this work, we investigate different local codes in the low-error regime of a leakage gate error model. When restricting to bare-ancilla extraction, we observe that subsystem codes are good candidates for handling leakage, as their locality can limit damaging correlated errors. As a case study, we compare subspace surface codes to the subsystem surface codes introduced by Bravyi et al. In contrast to depolarizing noise, subsystem surface codes outperform same-distance subspace surface codes below error rates as high as ⪅ 7.5 × 10−4 while offering better per-qubit distance protection. Furthermore, we show that at low to intermediate distances, Bacon–Shor codes offer better per-qubit error protection against leakage in an ion-trap motivated error model below error rates as high as ⪅ 1.2 × 10−3. For restricted leakage models, this advantage can be extended to higher distances by relaxing to unverified two-qubit cat state extraction in the surface code. These results highlight an intrinsic benefit of subsystem code locality to error-corrective performance.
Topological quantum error-correction codes are extremely practical, typically requiring only a two-dimensional lattice of qubits with tunable nearest-neighbor interactions yet tolerating high physical error rates ppp. It is computationally expensive to simulate the performance of such codes at low ppp, yet this is a regime we wish to study as low physical error rates lead to low qubit overhead. We present a very general method of analytically estimating the low-ppp performance of the most promising class of topological codes. Our method can handle arbitrary periodic quantum circuits implementing the error detection associated with this class of codes, and arbitrary Pauli error models for each type of quantum gate. Our analytic expressions take only seconds to obtain, versus hundreds of hours to perform equivalent low-ppp simulations.
Superconducting qubits, while promising for scalability and long coherence times, contain more than two energy levels, and therefore are susceptible to errors generated by the leakage of population outside of the computational subspace. Such leakage errors constitute a prominent roadblock towards fault-tolerant quantum computing (FTQC) with superconducting qubits. FTQC using topological codes is based on sequential measurements of multiqubit stabilizer operators. Here, we first propose a leakage-resilient procedure to perform repetitive measurements of multiqubit stabilizer operators, and then use this scheme as an ingredient to develop a leakage-resilient approach for surface code quantum error correction with superconducting circuits. Our protocol is based on swap operations between data and ancilla qubits at the end of every cycle, requiring read-out and reset operations on every physical qubit in the system, and thereby preventing persistent leakage errors from occurring.