We demonstrate continuous Sisyphus cooling combined with a continuous loading mechanism used to efficiently slow down and accumulate chromium atoms from a guided beam. While the loading itself is based on a single slowing step, applying a radio frequency field forces the atoms to repeat this step many times resulting in a so-called Sisyphus cooling. This extension allows efficient loading and cooling of atoms from a wide range of initial beam conditions. We study the interplay of the continuous loading and simultaneous Sisyphus cooling in different density regimes. In the case of a low density flux we observe a differential gain in phase-space density of nine orders of magnitude. This makes the presented scheme an ideal tool for reaching collisional densities enabling evaporative cooling—in spite of unfavourable initial conditions.
We demonstrate continuous Sisyphus cooling combined with a continuous loading mechanism used to efficiently slow down and accumulate chromium atoms from a guided beam. While the loading itself is based on a single slowing step, applying a radio frequency field forces the atoms to repeat this step many times resulting in a so-called Sisyphus cooling. This extension allows efficient loading and cooling of atoms from a wide range of initial beam conditions. We study the interplay of the continuous loading and simultaneous Sisyphus cooling in different density regimes. In the case of a low density flux we observe a differential gain in phase-space density of nine orders of magnitude. This makes the presented scheme an ideal tool for reaching collisional densities enabling evaporative cooling—in spite of unfavourable initial conditions.
In this thesis, I study optical pumping as a powerful cooling tool for trapped ultra-cold atoms in a highly collisional regime. First application of optical pumping is a continuous loading scheme used to transfer atoms from a guided beam into a hybrid trap. Further, I introduce a Sisyphus cooling scheme based on radio-frequency transitions and optical pumping, operating simultaneously to the accumulation of atoms in the trap. The combined scheme of continuous loading and Sisyphus cooling is demonstrated for a large range of initial conditions of the guided atoms. Thereby, I show that collisional thermalization occurs in a steady-state for almost arbitrary initial conditions, provided that the first dissipative step is able to prevent the atom from leaving the trap during its first passage. On the one hand, this scheme could be applied to a wide range of atomic or molecular beams. On the other hand, phase-space density of 4*10^-4 is reached in a continuous operation mode with chromium atoms. In the second part, I investigate demagnetization cooling based on dipolar relaxation collisions driving the thermalization of the internal (spin) and the external (motional) degrees of freedom. In the case of a gas, one has the advantage that the spin degree of freedom can be cooled very efficiently using optical pumping. It is shown, that demagnetization cooling of a gas is more efficient than evaporation cooling in terms of phase-space density gain versus loss of atoms. This allows reaching a temperature of 6uK at a phase-space density of 0.03. It is observed, that both, continuous Sisyphus cooling and demagnetization cooling are limited by a density dependent loss mechanism. I present circumstantial evidence for excited-state collisions as the dominant limiting process. Finally, I discuss possible extensions to the current experimental procedures, possibly allowing reaching quantum degeneracy by optical means only.
We demonstrate the fast accumulation of 52Cr atoms in a conservative potential from a guided atomic beam. Without laser cooling on a cycling transition, a dissipative step involving optical pumping allows us to load atoms at a rate of 2×10(7) s(-1) in the trap. Within less than 100 ms we reach the collisionally dense regime, from which we produce a Bose-Einstein condensate with subsequent evaporative cooling. This constitutes a new approach to degeneracy where Bose-Einstein condensation can be reached without a closed cycling transition, provided that a slow beam of particles can be produced.
We present a study of Sisyphus cooling of molecules: The scattering of a single photon removes a substantial amount of the molecular kinetic energy and an optical pumping step allows one to repeat the process. A review of the produced cold molecules so far indicates that the method can be implemented for most of them, making it a promising method able to produce a large sample of molecules at sub-mK temperatures. Considerations of the required experimental parameters, for instance the laser power and linewidth or the trap anisotropy and dimensionality, are given. Rate equations, as well as scattering and dipolar forces, are solved using kinetic Monte Carlo methods for several lasers and several levels. For NH molecules, such detailed simulation predicts a 1000-fold temperature reduction and an increase of the phase-space density by a factor of 107. Even in the case of molecules with both low Franck-Condon coefficients and a nonclosed pumping scheme, 60% of trapped molecules can be cooled from 100 mK to sub-mK temperatures in a few seconds. Additionally, these methods can be applied to continuously decelerate and cool a molecular beam.
We present a study of Sisyphus cooling of molecules: the scattering of a single-photon remove a substantial amount of the molecular kinetic energy and an optical pumping step allow to repeat the process. A review of the produced cold molecules so far indicates that the method can be implemented for most of them, making it a promising method able to produce a large sample of molecules at sub-mK temperature. Considerations of the required experimental parameters, for instance the laser power and linewidth or the trap anisotropy and dimensionality, are given. Rate equations, as well as scattering and dipolar forces, are solved using Kinetic Monte Carlo methods for several lasers and several levels. For NH molecules, such detailed simulation predicts a 1000-fold temperature reduction and an increase of the phase space density by a factor of 10^7 . Even in the case of molecules with both low Franck-Condon coefficients and a non-closed pumping scheme, 60% of trapped molecules can be cooled from 100 mK to sub-mK temperature in few seconds. Additionally, these methods can be applied to continuously decelerate and cool a molecular beam
Summary form only given.Laser cooling, where excess kinetic energy is extracted by a photon, is ideally suited to loading atoms into a trap; however, quantization and reabsorption of light, limit the maximum phase-space density attainable. A sequence of laser cooling followed by evaporative cooling, where the excess energy is extracted by escaping atoms, may be used to overcome the laser cooling limit; however, such a scheme dramatically reduces the number of trapped atoms. A remaining challenge is to achieve continuous loading without the phase-space density limit imposed by near-resonant light. We consider continuous evaporative loading of a magnetic trap using a magnetically insensitive buffer gas. The key is to deliver sufficient cold atoms to the trapping region such that the steady-state trap population is large. To achieve this we employ an atomic fountain guided by a far-off resonant laser beam. At the apex of the fountain, the density can be a factor of 30-40 higher than in a magneto-optical trapping region, and importantly, the atoms are spatially separated from the region of resonant laser light. We propose to use this high-density region as a reservoir for continuous evaporative loading of a trap.
This thesis examines two complimentary methods for the laser cooling of a magnetically guided ultra-cold atom beam. If combined, these methods could serve as a starting point for high-through put and possibly even continuous production of Bose-Einstein condensates. First, a mechanism is outlined to harvest ultra cold atoms from a magnetically guided atom beam into an optical dipole trap. A continuous loading scheme is described that dissipates the directed kinetic energy of a captured atom via deceleration by a magnetic potential barrier followed by optical pumping to the energetically lowest Zeeman sublevel. The application of this scheme to the transfer of ultra cold chromium atoms from a magnetically guided atom beam into a deep optical dipole trap is investigated via numerical simulations of the loading process. Based on the results of the theoretical studies the feasibility and the efficiency of our loading scheme, including the realisation of a suitable magnetic field configuration, are analysed. Second, experiments were conducted on the transverse laser cooling of a magnetically guided beam of ultra cold chromium atoms. Radial compression by a tapering of the guide is employed to adiabatically heat the beam. Inside the tapered section heat is extracted from the atom beam by a two-dimensional optical molasses perpendicular to it, resulting in a significant increase of atomic phase space density. A magnetic offset field is applied to prevent optical pumping to untrapped states. Our results demonstrate that by a suitable choice of the magnetic offset field, the cooling beam intensity and detuning, atom losses and longitudinal heating can be avoided. Final temperatures below 65 µK have been achieved, corresponding to an increase of phase space density in the guided beam by more than a factor of 30.