We propose that the dispersion management of coherent atomic matter waves can be exploited to overcome quantum back-action in condensate-based optomechanical sensors. The effective mass of an atomic Bose-Einstein condensate modulated by an optical lattice can become negative, resulting in a negative-frequency optomechanical oscillator, a negative environment temperature, and optomechanical properties opposite to those of a positive-mass system. This enables a quantum-mechanics-free subsystem insulated from quantum back-action.
We propose that the dispersion management of coherent atomic matter waves can be exploited to overcome quantum back-action in condensate-based optomechanical sensors. The effective mass of an atomic Bose-Einstein condensate modulated by an optical lattice can become negative, resulting in a negative-frequency optomechanical oscillator, a negative environment temperature, and optomechanical properties opposite to those of a positive-mass system. This enables a quantum-mechanics-free subsystem insulated from quantum back-action.
We propose that the dispersion management of coherent atomic matter waves can be exploited to overcome quantum back-action in condensate-based optomechanical sensors. The effective mass of an atomic Bose-Einstein condensate modulated by an optical lattice can become negative, resulting in a negative-frequency optomechanical oscillator, a negative environment temperature, and optomechanical properties opposite to those of a positive-mass system. This enables a quantum-mechanics-free subsystem insulated from quantum back-action.
Advances in precision optomechanical measurement underpin a wide range of technologies, from inertial sensors to the detection of gravitational waves and the exploration of fundamental physics. For such applications, the ultimate sensitivity is limited by quantum noise: shot noise, which stems from the stochastic arrival of photons, dominates at high frequencies, while Quantum Back-Action (QBA) noise—arising from the random radiation-pressure force exerted by the light field—prevails at low frequencies. The interplay between these two contributions defines the Standard Quantum Limit (SQL) of interferometry, a power-dependent trade-off that constrains further performance improvements. Although several sub-SQL techniques have been demonstrated, they typically enhance narrow-band sensitivity or require long filter cavities. Coherent Quantum Noise Cancellation (CQNC), first proposed by Tsang and Caves, offers a broadband solution by introducing an Effective Negative-Mass Oscillator (ENMO) that destructively interferes with the QBA noise across the entire spectrum except at the mechanical resonance of the opto-mechanically coupled system. A mathematically equivalent scheme for broadband QBA evasion has been demonstrated—for example, using atomic ensembles. The operation of this scheme is restricted to specific atomic transition wavelengths and is therefore unsuitable for many optomechanical platforms. This thesis reports the first all-optical, table-top realisation of an ENMO capable of Coherent Quantum Noise Cancellation in quantum optomechanical sensors. The scheme employs an optical analogue of the optomechanical interaction, generated through a combination of parametric down-conversion and beam-splitting processes, yielding a tunable, wavelength-flexible, and compact system. The achieved parameters satisfy the CQNC targets established in earlier theoretical work, and the current system predicts a broadband quantum-noise reduction of 3.6 dB (77% suppression of QBA noise(in dB)) at the frequency of maximum suppression. With further reduction of intracavity losses, the projected cancellation improves to 11.9 dB (81% suppression (in dB)). The experimental realisation features two polarisation-coupled optical resonators that host a two-mode squeezing interaction; the optical resonators possess distinct detunings and linewidths. The interdependent nature of the ENMO system motivated the development of an in-situ characterisation method, which is essential for integrating the ENMO with an optomechanical system in practical applications. Adequately addressing the system’s complexity required the development of five specialised experimental techniques for parameter tuning and comprehensive characterisation. Beyond quantum-noise cancellation, this system lends itself to application in quantum-information and quantum-communication tasks, including an on-demand, high-purity single-photon source and a quantum memory. Owing to the optical platform’s immunity to thermal decoherence, it can be operated at room temperature, and the parametric down-conversion process affords flexibility in wavelength selection. The results presented here advance the state of the art in broadband quantum noise reduction in a broad class of optomechanical devices, with immediate relevance for emerging quantum-technology applications.
Cavity optomechanics originated from the research of interferometric detection of gravitational waves, and later became a fast-growing area of techniques and approaches ranging from the fields of atomic, molecular, and optical physics to nano-science and condensed matter physics as well. Recently, it focused on the exploration of operating mechanical oscillators deep in the quantum regime, with an interest ranging from quantum-classical interface tests to high-precision quantum metrology. In this paper, recent theoretical work of our group in the field of quantum measurement with cavity optomechanical systems is reviewed. We explore the quantum measurement theory and its applications with several unconventional cavity optomechanical schemes working in the quantum regime. This review covers the basics of quantum noises in the cavity optomechanical setups and the resulting standard quantum limit of precision displacement and force measurement. Three novel quantum measurement proposals based on the hybrid optomechanical system are introduced. First, we describe a quantum back-action insulated weak force sensor. It is realized by forming a quantum-mechanics-free subsystem with two optomechanical oscillators of reversed effective mass. Then we introduce a role-reversed atomic optomechanical system which enables the preparation and the quantum tomography of a variety of non-classical states of atoms. In this system, the cavity field acts as a mechanical oscillator driven by the radiation pressure force from an ultracold atomic field. In the end, we recommend a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain. These proposals demonstrate the possible applications of optomechanical devices in understanding of quantum-classical crossover and in achieving quantum measurement limit.
Cavity optomechanics studies the coupling between a mechanical oscillator and the electromagnetic field in a cavity. We report on a cavity optomechanical system in which a collective density excitation of a Bose-Einstein condensate serves as the mechanical oscillator coupled to the cavity field. A few photons inside the ultrahigh-finesse cavity trigger strongly driven back-action dynamics, in quantitative agreement with a cavity optomechanical model. We approach the strong coupling regime of cavity optomechanics, where a single excitation of the mechanical oscillator substantially influences the cavity field. The results open up new directions for investigating mechanical oscillators in the quantum regime and the border between classical and quantum physics.
We present a detailed study to show the possibility of approaching the quantum ground state of a hybrid optomechanical quantum device formed by a Bose–Einstein condensate (BEC) confined inside a high-finesse optical cavity with an oscillatory end mirror. Cooling is achieved using two experimentally realizable schemes: back-action cooling and cold damping quantum feedback cooling. In both the schemes, we found that increasing the two-body atom–atom interaction brings the mechanical oscillator to its quantum ground state. It has been observed that back-action cooling is more effective in the good cavity limit, while the cold damping cooling scheme is more relevant in the bad cavity limit. It is also shown that in the cold damping scheme, the device is more efficient in the presence of a BEC than in the absence of a BEC.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.