Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1303.7174 · Optics Letters

Parametric four-wave mixing using a single cw laser

Erik Brekke, Laura Alderson

Published Jun 12, 2013• 39 citations
arXivHTMLPDF

Abstract

Four-wave mixing can be used to generate coherent output beams, with frequencies difficult to acquire in commercial lasers. Here, a single narrow external cavity diode laser locked to the two photon 5s-5d transition in rubidium is combined with a tapered amplifier system to produce a high power cw beam at 778 nm and used to generate coherent light at 420 nm through parametric four-wave mixing. This process is analyzed in terms of the intensity and frequency of the incoming beam as well as the atomic density of the sample. The efficiency of the process is currently limited when on resonance due to the absorption of the 420 nm beam, and modifications should allow a significant increase in output power.

DOI
10.1364/ol.38.002147

Related papers

Coherent 420 nm laser beam generated by four-wave mixing in Rb vapor with a single continuous-wave laser*

Hao Liu, Jinpeng Yuan, Lirong Wang +2 more

We demonstrate the generation of the coherent 420 nm laser via parametric four-wave mixing process in Rb vapor. A single 778 nm laser with circular polarization is directly injected into a high-density atomic vapor, which drives the atoms from the 5S1/2 state to the 5D5/2 state with monochromatic two-photon transition. The frequency up-conversion laser is generated by the parametric four-wave mixing process under the phase matching condition. This coherent laser is firstly certified by the knife-edge method and a narrow range grating spectrometer. Then the generated laser power is investigated in terms of the power and frequency of the incoming beam as well as the density of the atoms. Finally, a 420 nm coherent laser with power of 19 μW and beam quality of M x 2 = 1.32 , M y 2 = 1.37 is obtained with optimal experimental parameters. This novel laser shows potential prospects in the measurement of material properties, information storage, and underwater optical communication.

Chinese Physics B•Feb 13, 2020•4 citations

Frequency characteristics of far-detuned parametric four-wave mixing in Rb

Erik Brekke, Emily Herman

We have investigated the frequency characteristics of the coherent 420 nm beam generated via parametric four-wave mixing (FWM). A single, high-power 778 nm laser is directed through a high-density rubidium cell with a detuning of 1 THz from the intermediate state, generating fields at 420 nm and 5.23 μm through FWM. The frequency of the 420 nm light has been found to shift as the excitation laser is tuned. The measured frequency shift ratio of 1.87±0.04 corresponds with the selection of a different velocity class at each excitation frequency, implying that the 5.23 μm beam frequency is correspondingly shifted. The 420 nm light has been tuned over a range of 1 GHz. This parametric FWM process has potential application as a tunable photon source at novel wavelengths.

Optics Letters•Nov 25, 2015•28 citations

Optical cavity for enhanced parametric four-wave mixing in rubidium

E. Brekke, S. Potier

We have incorporated a ring cavity to enhance the efficiency of parametric four-wave mixing in rubidium (Rb). Using an input coupler with 95% reflectance, a finesse of 19.6±0.5 is achieved with an Rb cell inside. This increases the circulating intensity by a factor of 5.6±0.5, and through two-photon excitation on the 5s1/2→5d5/2 transition with a single excitation laser, up to 1.9±0.3 mW of power at 420 nm is generated, 50 times what was previously generated with this scheme and comparable to low-power two-step excitation. The dependence of the output on the Rb density and input power has been explored, suggesting the process may be approaching saturation. The blue output of the cavity also shows greatly improved spatial quality, combining to make this a promising source of 420 nm light for future experiments.

arXiv:1608.07603•Applied Optics•Dec 20, 2016•21 citations

Coherent near-infrared light generation based on self-seeded parametric four-wave mixing in Rb vapor

Xuewen Wang, Jinpeng Yuan, Lirong Wang +2 more

Abstract We demonstrate 1.37 µ m coherent near-infrared light generation via self-seeded parametric four-wave mixing (FWM) process in Rb atomic vapor. Two lasers (780 nm and 776 nm) in the co-propagating configuration, drive the Rb atoms from the 5S 1/2 ground state to the 5D 5/2 excited state. The parametric FWM around the 5P 3/2 –5D 5/2 –6P 3/2 –6S 1/2 –5P 3/2 transition loop is effectively established under phase matching conditions. The generated coherent light wavelength is confirmed using an optical spectrum analyzer, and the output power is investigated with the input laser frequency, power and atomic density. Consequently, a 1.37 µ m coherent light with the power of 27 µ W and the beam quality of M x 2 = 1.22 and M y 2 = 1.25 is obtained. An additional 795 nm laser is introduced to enhance the output power by 1.5 times through velocity-selective optical hyperfine repumping.

Laser Physics Letters•Apr 23, 2021•0 citations

Coherent 420 nm light generated by the cavity-enhanced four-wave mixing process in Rb vapor

Jinpeng Yuan, Hao Liu, Lirong Wang +2 more

We have generated a stable and continuously tunable single frequency (420 nm) coherent blue light (CBL) by the cavity-enhanced four-wave mixing process in Rb vapor. With the bow-tie-type ring cavity, the output power was 3.3 mW, two orders of magnitude higher than that of the CBL generated by the single-pass four-wave mixing process. The measured power stabilities of the 420 nm CBL operated at 2.5 mW and 1.5 mW for 1000 s were 2.89% and 1.88%, respectively. Under the scanning pump laser frequency, the continuously tunable range of the generated CBL reached 1.68 GHz without mode hopping. The measured beam qualities of the generated laser were M x 2 = 1.117 and M y 2 = 1.179 . The excellent performance of the 420 nm CBL was characterized by velocity transfer spectroscopy with 780 nm probe laser. This high quality short wavelength coherent light is potentially applicable to photon-atom interactions in quantum optics and fundamental research fields.

Optics Express•Jan 26, 2021•20 citations

A Compact Source for Quantum Image Processing with Four-wave Mixing in Rubidium-85

Ulrich Vogl, Ryan T. Glasser, Paul D. Lett

We have built a compact light source for bright squeezed twin-beams at 795\,nm based on four-wave-mixing in atomic $^{85}$Rb vapor. With a total optical power of 400\,mW derived from a free running diode laser and a tapered amplifier to pump the four-wave-mixing process, we achieve 2.1\,dB intensity difference squeezing of the twin beams below the standard quantum limit, without accounting for losses. Squeezed twin beams generated by the type of source presented here could be used as reference for the precise calibration of photodetectors. Transferring the quantum correlations from the light to atoms in order to generate correlated atom beams is another interesting prospect. In this work we investigate the dispersion that is generated by the employed four-wave-mixing process with respect to bandwidth and dependence on probe detuning. We are currently using this squeezed light source to test the transfer of spatial information and quantum correlations through media of anomalous dispersion.

•Aug 17, 2016•0 citations
Four-wave mixing can be used to generate coherent output beams, with frequencies difficult to acquire in commercial lasers. Here, a single narrow external cavity diode laser locked to the two photon 5s-5d transition in rubidium is combined with a tapered amplifier system to produce a high power cw beam at 778 nm and used to generate coherent light at 420 nm through parametric four-wave mixing. This process is analyzed in terms of the intensity and frequency of the incoming beam as well as the atomic density of the sample. The efficiency of the process is currently limited when on resonance due to the absorption of the 420 nm beam, and modifications should allow a significant increase in output power.
We demonstrate the generation of the coherent 420 nm laser via parametric four-wave mixing process in Rb vapor. A single 778 nm laser with circular polarization is directly injected into a high-density atomic vapor, which drives the atoms from the 5S1/2 state to the 5D5/2 state with monochromatic two-photon transition. The frequency up-conversion laser is generated by the parametric four-wave mixing process under the phase matching condition. This coherent laser is firstly certified by the knife-edge method and a narrow range grating spectrometer. Then the generated laser power is investigated in terms of the power and frequency of the incoming beam as well as the density of the atoms. Finally, a 420 nm coherent laser with power of 19 μW and beam quality of M x 2 = 1.32 , M y 2 = 1.37 is obtained with optimal experimental parameters. This novel laser shows potential prospects in the measurement of material properties, information storage, and underwater optical communication.
We have investigated the frequency characteristics of the coherent 420 nm beam generated via parametric four-wave mixing (FWM). A single, high-power 778 nm laser is directed through a high-density rubidium cell with a detuning of 1 THz from the intermediate state, generating fields at 420 nm and 5.23 μm through FWM. The frequency of the 420 nm light has been found to shift as the excitation laser is tuned. The measured frequency shift ratio of 1.87±0.04 corresponds with the selection of a different velocity class at each excitation frequency, implying that the 5.23 μm beam frequency is correspondingly shifted. The 420 nm light has been tuned over a range of 1 GHz. This parametric FWM process has potential application as a tunable photon source at novel wavelengths.
We have incorporated a ring cavity to enhance the efficiency of parametric four-wave mixing in rubidium (Rb). Using an input coupler with 95% reflectance, a finesse of 19.6±0.5 is achieved with an Rb cell inside. This increases the circulating intensity by a factor of 5.6±0.5, and through two-photon excitation on the 5s1/2→5d5/2 transition with a single excitation laser, up to 1.9±0.3 mW of power at 420 nm is generated, 50 times what was previously generated with this scheme and comparable to low-power two-step excitation. The dependence of the output on the Rb density and input power has been explored, suggesting the process may be approaching saturation. The blue output of the cavity also shows greatly improved spatial quality, combining to make this a promising source of 420 nm light for future experiments.
Abstract We demonstrate 1.37 µ m coherent near-infrared light generation via self-seeded parametric four-wave mixing (FWM) process in Rb atomic vapor. Two lasers (780 nm and 776 nm) in the co-propagating configuration, drive the Rb atoms from the 5S 1/2 ground state to the 5D 5/2 excited state. The parametric FWM around the 5P 3/2 –5D 5/2 –6P 3/2 –6S 1/2 –5P 3/2 transition loop is effectively established under phase matching conditions. The generated coherent light wavelength is confirmed using an optical spectrum analyzer, and the output power is investigated with the input laser frequency, power and atomic density. Consequently, a 1.37 µ m coherent light with the power of 27 µ W and the beam quality of M x 2 = 1.22 and M y 2 = 1.25 is obtained. An additional 795 nm laser is introduced to enhance the output power by 1.5 times through velocity-selective optical hyperfine repumping.
We have generated a stable and continuously tunable single frequency (420 nm) coherent blue light (CBL) by the cavity-enhanced four-wave mixing process in Rb vapor. With the bow-tie-type ring cavity, the output power was 3.3 mW, two orders of magnitude higher than that of the CBL generated by the single-pass four-wave mixing process. The measured power stabilities of the 420 nm CBL operated at 2.5 mW and 1.5 mW for 1000 s were 2.89% and 1.88%, respectively. Under the scanning pump laser frequency, the continuously tunable range of the generated CBL reached 1.68 GHz without mode hopping. The measured beam qualities of the generated laser were M x 2 = 1.117 and M y 2 = 1.179 . The excellent performance of the 420 nm CBL was characterized by velocity transfer spectroscopy with 780 nm probe laser. This high quality short wavelength coherent light is potentially applicable to photon-atom interactions in quantum optics and fundamental research fields.
We have built a compact light source for bright squeezed twin-beams at 795\,nm based on four-wave-mixing in atomic 85^{85}85Rb vapor. With a total optical power of 400\,mW derived from a free running diode laser and a tapered amplifier to pump the four-wave-mixing process, we achieve 2.1\,dB intensity difference squeezing of the twin beams below the standard quantum limit, without accounting for losses. Squeezed twin beams generated by the type of source presented here could be used as reference for the precise calibration of photodetectors. Transferring the quantum correlations from the light to atoms in order to generate correlated atom beams is another interesting prospect. In this work we investigate the dispersion that is generated by the employed four-wave-mixing process with respect to bandwidth and dependence on probe detuning. We are currently using this squeezed light source to test the transfer of spatial information and quantum correlations through media of anomalous dispersion.