Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1301.6095 · Physical Review X

Persistent Control of a Superconducting Qubit by Stroboscopic Measurement Feedback

Philippe Campagne-Ibarcq, Emmanuel Flurin, Nicolas Roch, David Darson, Pascal Morfin, Mazyar Mirrahimi, Michel Devoret, F. Mallet, Benjamin Huard

Published May 29, 2013• 147 citations
arXivHTMLPDF

Abstract

In sensing-feedback control of a quantum system, optimizing the timing of the sensing measurements turns out to be a key to getting around the fundamental difficulty that a measurement can randomly change the system's state. Achieving optimal timing by combining technical advances with conceptual physical insight, researchers demonstrate, for the first time, high-fidelity control of a superconducting qubit along time-dependent trajectories.

DOI
10.1103/physrevx.3.021008

Related papers

Feedback control of superconducting quantum circuits

Diego Ristè

Superconducting circuits have recently risen to the forefront of the solid-state prototypes for quantum computing. Reaching the stage of robust quantum computing requires closing the loop between measurement and control of quantum bits (qubits). This thesis presents the realization of feedback control of superconducting qubits based on projective measurement, with initial applications. The first application is a reset operation which initializes a qubit in the ground state fast and on demand. In a second experiment, we transform a cavity into a two-qubit parity meter, which is capable of generating entanglement starting from an unentangled superposition state. We then employ feedback to turn the generation of entanglement from probabilistic to deterministic, thus combining two key ingredients - parity measurement and feedback - of quantum error correction. As a third application, we transform a superconducting qubit into a charge-parity detector to investigate the limits of quasiparticle tunneling to qubit coherence. We find room for at least a tenfold increase in qubit coherence times before quasiparticles become the bottleneck. Finally, we present our latest results towards implementing the bit-flip error correction code in a five-qubit processor and discuss the role of feedback control in the future development of superconducting quantum circuits.

•Jan 1, 2014•2 citations

Control of superconducting circuits by quantum feedback

Benjamin Huard

The macroscopic variables of electrical circuits, such as voltages and currents, obey quantum mechanics as long as they are protected enough from their environment. Since the first qubit based on a superconducting circuit was realized 15 years ago, the coherence time has already increased by 5 orders of magnitude. In this talk, I will present recent experiments on these circuits where quantum feedback enables the time control of quantum trajectories. Autonomous feedback and measurement based feedback are implemented.

•Mar 31, 2014•0 citations

Measurement back action and feedback in superconducting circuits

Philippe Campagne-Ibarcq

This thesis presents a series of experiments highlighting measurement back action and decoherence in a basic open quantum system, the superconducting qubit. These observations are enabled by recent advances in amplification close to the quantum limit using Josephson circuits. The information extracted from the system can then be used as input in quantum feedback. A stroboscopic projective readout is performed and a feedback loop is used to correct for detected errors, thus stabilizing an arbitrary predetermined state of the qubit. When monitoring continuously the environment of the qubit by heterodyne detection of its fluorescence, we reconstruct individual quantum trajectories during relaxation. Conditioning this detection to the outcome of a following projective measurement, we access the weak values of the fluorescence signal. Included in a continuous feedback loop, this detection is also used to stabilize an arbitrary state of the qubit. Finally, a last experiment witnesses quantum Zeno dynamics of a resonant microwave mode, entailed by its coupling to the qubit.

•Jun 26, 2015•7 citations

Quantum feedback for measurement and control

Leigh S. Martin

The standard quantum formalism introduced at the undergraduate level treats measurement as an instantaneous collapse. In reality however, no physical process can occur over a truly infinitesimal time interval. A more subtle investigation of open quantum systems lead to the theory of continuous measurement and quantum trajectories, in which wave function collapse occurs over a finite time scale associated with an interaction. Within this formalism, it becomes possible to ask many new questions that would be trivial or even ill-defined in the context of the more basic measurement model. In this thesis, we investigate both theoretically and experimentally what fundamentally new capabilities arise when an experimental apparatus can resolve the continuous dynamics of a measurement. Theoretically, we show that when one can perform feedback operations on the timescale of the measurement process, the resulting tools provide significantly more control over entanglement generation, and in some settings can generate it optimally. We derive these results using a novel formalism which encompasses most known quantum feedback protocols. Experimentally, we show that continuous measurement allows one to observe the dynamics of a system undergoing simultaneous non-commuting measurements, which provides a reinterpretation of the Heisenberg uncertainty principle. Finally, we combine the theoretical focus on quantum feedback with the experimental capabilities of superconducting circuits to implement a feedback controlled quantum amplifier. The resulting system is capable of adaptive measurement, which we use to perform the first canonical phase measurement.

arXiv:2004.09766•Apr 21, 2020•4 citations

Quantum Feedback and Traveling-wave Parametric Amplification in Superconducting Circuits

Christopher Stewart Macklin

Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.

•Jan 1, 2015•4 citations

Feedback Control of a Solid-State Qubit Using High-Fidelity Projective Measurement

Diego Ristè, Cornelis Christiaan Bultink, Konrad W. Lehnert +1 more

We demonstrate feedback control of a superconducting transmon qubit using discrete, projective measurement and conditional coherent driving. Feedback realizes a fast and deterministic qubit reset to a target state with 2.4% error averaged over input superposition states, and allows concatenating experiments more than 10 times faster than by passive initialization. This closed-loop qubit control is necessary for measurement-based protocols such as quantum error correction and teleportation.

arXiv:1207.2944•Physical Review Letters•Dec 10, 2012•200 citations
In sensing-feedback control of a quantum system, optimizing the timing of the sensing measurements turns out to be a key to getting around the fundamental difficulty that a measurement can randomly change the system's state. Achieving optimal timing by combining technical advances with conceptual physical insight, researchers demonstrate, for the first time, high-fidelity control of a superconducting qubit along time-dependent trajectories.
Superconducting circuits have recently risen to the forefront of the solid-state prototypes for quantum computing. Reaching the stage of robust quantum computing requires closing the loop between measurement and control of quantum bits (qubits). This thesis presents the realization of feedback control of superconducting qubits based on projective measurement, with initial applications. The first application is a reset operation which initializes a qubit in the ground state fast and on demand. In a second experiment, we transform a cavity into a two-qubit parity meter, which is capable of generating entanglement starting from an unentangled superposition state. We then employ feedback to turn the generation of entanglement from probabilistic to deterministic, thus combining two key ingredients - parity measurement and feedback - of quantum error correction. As a third application, we transform a superconducting qubit into a charge-parity detector to investigate the limits of quasiparticle tunneling to qubit coherence. We find room for at least a tenfold increase in qubit coherence times before quasiparticles become the bottleneck. Finally, we present our latest results towards implementing the bit-flip error correction code in a five-qubit processor and discuss the role of feedback control in the future development of superconducting quantum circuits.
The macroscopic variables of electrical circuits, such as voltages and currents, obey quantum mechanics as long as they are protected enough from their environment. Since the first qubit based on a superconducting circuit was realized 15 years ago, the coherence time has already increased by 5 orders of magnitude. In this talk, I will present recent experiments on these circuits where quantum feedback enables the time control of quantum trajectories. Autonomous feedback and measurement based feedback are implemented.
This thesis presents a series of experiments highlighting measurement back action and decoherence in a basic open quantum system, the superconducting qubit. These observations are enabled by recent advances in amplification close to the quantum limit using Josephson circuits. The information extracted from the system can then be used as input in quantum feedback. A stroboscopic projective readout is performed and a feedback loop is used to correct for detected errors, thus stabilizing an arbitrary predetermined state of the qubit. When monitoring continuously the environment of the qubit by heterodyne detection of its fluorescence, we reconstruct individual quantum trajectories during relaxation. Conditioning this detection to the outcome of a following projective measurement, we access the weak values of the fluorescence signal. Included in a continuous feedback loop, this detection is also used to stabilize an arbitrary state of the qubit. Finally, a last experiment witnesses quantum Zeno dynamics of a resonant microwave mode, entailed by its coupling to the qubit.
The standard quantum formalism introduced at the undergraduate level treats measurement as an instantaneous collapse. In reality however, no physical process can occur over a truly infinitesimal time interval. A more subtle investigation of open quantum systems lead to the theory of continuous measurement and quantum trajectories, in which wave function collapse occurs over a finite time scale associated with an interaction. Within this formalism, it becomes possible to ask many new questions that would be trivial or even ill-defined in the context of the more basic measurement model. In this thesis, we investigate both theoretically and experimentally what fundamentally new capabilities arise when an experimental apparatus can resolve the continuous dynamics of a measurement. Theoretically, we show that when one can perform feedback operations on the timescale of the measurement process, the resulting tools provide significantly more control over entanglement generation, and in some settings can generate it optimally. We derive these results using a novel formalism which encompasses most known quantum feedback protocols. Experimentally, we show that continuous measurement allows one to observe the dynamics of a system undergoing simultaneous non-commuting measurements, which provides a reinterpretation of the Heisenberg uncertainty principle. Finally, we combine the theoretical focus on quantum feedback with the experimental capabilities of superconducting circuits to implement a feedback controlled quantum amplifier. The resulting system is capable of adaptive measurement, which we use to perform the first canonical phase measurement.
Feedback control in classical systems is an indispensable, ubiquitous tool. The theoretical basis for achieving optimal classical control is well understood, and crucially relies on a very classical assumption: that measurements of the state of a system under control need not perturb that state. In a quantum context this assumption is fundamentally invalid. Although many aspects of the theory of quantum feedback control are relatively well developed, the technological basis for feedback control of a single quantum system has only very recently matured. We demonstrate the experimental realization of a quantum feedback control protocol, perpetually stabilizing the coherent Rabi oscillations of a superconducting qubit. This is the first utilization of quantum feedback control for stabilizing a dynamical process, and the first application of quantum feedback in a solid-state system of any kind. This demonstration comprises the first half of this thesis. The feedback protocol is predicated on the ability to make high-fidelity quantum measurements, which are enabled by quantum-limited Josephson parametric amplifiers (JPAs). The design and realization of the novel Josephson traveling-wave parametric amplifier (JTWPA) comprises the second half of this thesis. The JTWPA achieves order-of-magnitude improvements over state of the art JPAs in bandwidth and signal power handling while providing quantum-limited noise performance, potentially enabling the simultaneous readout of dozens of superconducting qubits and the generation of broadband multi-mode squeezing in the microwave domain.