Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1211.3828 · IEEE Transactions on Communications

Construction of High-Rate Regular Quasi-Cyclic LDPC Codes Based on Cyclic Difference Families

Hosung Park, Seokbeom Hong, Jong‐Seon No, Dong‐Joon Shin

Published Jul 16, 2013• 33 citations
arXivHTMLPDF

Abstract

For a high-rate case, it is difficult to randomly construct good low-density parity-check (LDPC) codes of short and moderate lengths because their Tanner graphs are prone to have short cycles. Also, the existing high-rate quasi-cyclic (QC) LDPC codes can be constructed only for very restricted code parameters. In this paper, based on special classes of cyclic difference families, we propose a new construction method of high-rate regular QC LDPC codes having parity-check matrices consisting of a single row of circulants with column-weight 3 or 4. The proposed QC LDPC codes can be constructed for various code rates and lengths including the minimum achievable length for given column-weight and design rate under girth 6. It is observed that the parity-check matrices of the proposed QC LDPC codes have full rank for column-weight 3 and just one redundant row for column-weight 4. It is shown that the error correcting performance of the proposed QC LDPC codes of short and moderate lengths is almost the same as that of the existing ones through numerical analysis.

DOI
10.1109/tcomm.2013.070213.120879

Related papers

QC-LDPC Codes Construction by Concatenating of Circulant Matrices as Block-Columns

Mohammad Hesam Tadayon, Mohammad Mohammadi

In this paper a new low complexity method for constructing binary quasi-cyclic low-density parity-check (QC-LDPC) codes is introduced. In the proposed method, each block-column of the parity check matrix H is made by a circulant matrix in a way that the associated Tanner graph is free of cycle four. Each circulant matrix in H is made by a generator column. The generator columns should be selected in a way that each associated circulant matrix and every two distinct circulant matrices are free of cycle four. The generator columns are made by row distance sets. An algorithm for generating distance sets and obtaining circulant matrices with columns of weight three is presented separately. Simplicity of construction and having a good flexible family of quasi cyclic LDPC codes both in rate and length are the main properties of the proposed method. The performance of the proposed codes is compared with that of the random-like and Array LDPC codes over an AWGN channel. Simulation results show that from the performance perspective, the constructed codes are competitive with random-like and Array LDPC codes.

International Journal of Information & Communication Technology Research•Jun 15, 2016•0 citations

A class of structured quasi-cyclic LDPC codes based on planar difference families

Shady M. Ibraheem, Maher Abdelrazzak, Salwa M. Serag Eldin +2 more

This paper is devoted to introduce a special classes of (QC-LDPC) with very restricted code parameters based on planar difference families. Such difference families could be obtained by numerical analysis and computer programs. The resulting codes have parity check matrices with column-weight greater than three, at least no 4-cycle and approximately full rank. It can be noted that the construction based on planar difference families exhibits more flexibility than that based on difference sets in terms of length and code rate selections. Besides, the more increasing in the column-weights of parity check matrices of QC-LDPC codes, the more improvement in the minimum distances of them. Simulation results show that over the additive white Gaussian noise channel, these codes could outperform their randomly constructed counterparts.

International Conference on Advanced Technologies for Communications•Oct 1, 2013•0 citations

Quasi-Cyclic Low-Density Parity-Check Codes Based on Progressive Cycle Growth Algorithm

Yuanhua Liu, Meiling Zhang, Niu Xin-Liang

Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.

International Conference on Instrumentation and Measurement, Computer, Communication and Control (IMCCC)•Jul 1, 2016•1 citation

Flexible Construction of High-Girth QC-LDPC Codes

Gabofetswe Malema

This article presents a highly flexible method for constructing high-girth quasi-cyclic low-density parity-check (QC-LDPC) codes. The proposed algorithm constructs a Tanner graph formed by connecting groups of rows (check nodes) and columns (variable nodes) of the constructed code. To obtain a sub-matrix structure, rows and columns are divided into groups of equal sizes. Rows and columns in a group are connected in their numerical (positional) order to obtain a cyclic structure. Connected rows and columns must satisfy the desired minimum cycle length. We present conditions that guarantee desired girths. The proposed algorithm is by far more flexible in constructing a wide range (rates and lengths) of regular and irregular QC-LDPC codes compared to existing methods. The algorithm, which has linear complexity with respect to the number of rows or columns, provides an easy and fast way to construct QC-LDPC codes. Constructed codes show good bit error rate performances.

International journal of computer science and applications•Aug 1, 2012•2 citations

Construction of quasi-cyclic LDPC codes from one-coincidence sequences

Chun-Ming Huang, Chao-Chin Yang, Jen-Fa Huang

In this paper, we proposed a new method for constructing quasi-cyclic low-density parity-check (QC-LDPC) codes based on circulant permutation matrices via the one-coincidence sequences. The main advantage is that QC-LDPC codes with a variety of block lengths and rates can be easily constructed with no cycles of length four or less. Simulation results show that the proposed QC-LDPC codes perform slight better than the random regular LDPC codes for short to moderate block lengths and have almost the same performance as Sridara- Fuja-Tanner codes.

International Conference on Communications, Circuits and Systems•May 1, 2008•0 citations

Design of good quasi-cyclic LDPC codes

Xu Dan

The existing design of quasi-cyclic(QC) low-density parity-check(LDPC) codes has not considered the problems of short length girths and the rows' dependency.The first problem leads to the BER performance of QC LDPC codes to be much poorer than that of randomly constructed LDPC codes,while the second problem leads to the difficulty of construction of generator matrices from parity-check matrices.To solve the first problem,the constraint conditions for designing the QC LDPC codes are proposed,and the dimension and shift factors of the circulant matrices of the given sparse parity-check matrix are adjusted according to the test results of both girth 4 and girth 6.To solve the second problem,an approach of irregular QC LDPC codes is proposed.The proposed approach is to replace some sub-matrices by zero matrices and identity matrices at special positions in the given sparse parity-check matrix so as to get a nonsingular square matrix for the construction of the generator matrix.Though adopting bidiagonal submatrices in parity-check matrix can solve the rows' dependency problem,many code words with low weights will occur,which leads to the BER performance can not be better by increasing code lengths.Examples are provided for the proposed design of QC LDPC codes,and computer simulation results show that the proposed QC LDPC codes achieve good BER performance.

Systems engineering and electronics•Jan 1, 2009•1 citation
For a high-rate case, it is difficult to randomly construct good low-density parity-check (LDPC) codes of short and moderate lengths because their Tanner graphs are prone to have short cycles. Also, the existing high-rate quasi-cyclic (QC) LDPC codes can be constructed only for very restricted code parameters. In this paper, based on special classes of cyclic difference families, we propose a new construction method of high-rate regular QC LDPC codes having parity-check matrices consisting of a single row of circulants with column-weight 3 or 4. The proposed QC LDPC codes can be constructed for various code rates and lengths including the minimum achievable length for given column-weight and design rate under girth 6. It is observed that the parity-check matrices of the proposed QC LDPC codes have full rank for column-weight 3 and just one redundant row for column-weight 4. It is shown that the error correcting performance of the proposed QC LDPC codes of short and moderate lengths is almost the same as that of the existing ones through numerical analysis.
In this paper a new low complexity method for constructing binary quasi-cyclic low-density parity-check (QC-LDPC) codes is introduced. In the proposed method, each block-column of the parity check matrix H is made by a circulant matrix in a way that the associated Tanner graph is free of cycle four. Each circulant matrix in H is made by a generator column. The generator columns should be selected in a way that each associated circulant matrix and every two distinct circulant matrices are free of cycle four. The generator columns are made by row distance sets. An algorithm for generating distance sets and obtaining circulant matrices with columns of weight three is presented separately. Simplicity of construction and having a good flexible family of quasi cyclic LDPC codes both in rate and length are the main properties of the proposed method. The performance of the proposed codes is compared with that of the random-like and Array LDPC codes over an AWGN channel. Simulation results show that from the performance perspective, the constructed codes are competitive with random-like and Array LDPC codes.
This paper is devoted to introduce a special classes of (QC-LDPC) with very restricted code parameters based on planar difference families. Such difference families could be obtained by numerical analysis and computer programs. The resulting codes have parity check matrices with column-weight greater than three, at least no 4-cycle and approximately full rank. It can be noted that the construction based on planar difference families exhibits more flexibility than that based on difference sets in terms of length and code rate selections. Besides, the more increasing in the column-weights of parity check matrices of QC-LDPC codes, the more improvement in the minimum distances of them. Simulation results show that over the additive white Gaussian noise channel, these codes could outperform their randomly constructed counterparts.
Short cycles in the Tanner graph of a given LDPC code has negative effect on the performance of iterative decoding. To improve the performance, we presented an approach for constructing Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes whose associated Tanner graph has large girth and a small amount of short cycles. Each column block of the parity check matrix was designed by adding circulant permutation sub-matrices one after another, provided the current parity check matrix has minimal number of short cycles. The condition for the proposed QC-LDPC codes to have girth at least 6 was also analyzed. Regular and irregular QC-LDPC codes with various lengths and rates can be constructed. Simulations show that the proposed QC-LDPC codes have less short cycles and better performance than existing progressive edge growth based QC-LDPC codes.
This article presents a highly flexible method for constructing high-girth quasi-cyclic low-density parity-check (QC-LDPC) codes. The proposed algorithm constructs a Tanner graph formed by connecting groups of rows (check nodes) and columns (variable nodes) of the constructed code. To obtain a sub-matrix structure, rows and columns are divided into groups of equal sizes. Rows and columns in a group are connected in their numerical (positional) order to obtain a cyclic structure. Connected rows and columns must satisfy the desired minimum cycle length. We present conditions that guarantee desired girths. The proposed algorithm is by far more flexible in constructing a wide range (rates and lengths) of regular and irregular QC-LDPC codes compared to existing methods. The algorithm, which has linear complexity with respect to the number of rows or columns, provides an easy and fast way to construct QC-LDPC codes. Constructed codes show good bit error rate performances.
In this paper, we proposed a new method for constructing quasi-cyclic low-density parity-check (QC-LDPC) codes based on circulant permutation matrices via the one-coincidence sequences. The main advantage is that QC-LDPC codes with a variety of block lengths and rates can be easily constructed with no cycles of length four or less. Simulation results show that the proposed QC-LDPC codes perform slight better than the random regular LDPC codes for short to moderate block lengths and have almost the same performance as Sridara- Fuja-Tanner codes.
The existing design of quasi-cyclic(QC) low-density parity-check(LDPC) codes has not considered the problems of short length girths and the rows' dependency.The first problem leads to the BER performance of QC LDPC codes to be much poorer than that of randomly constructed LDPC codes,while the second problem leads to the difficulty of construction of generator matrices from parity-check matrices.To solve the first problem,the constraint conditions for designing the QC LDPC codes are proposed,and the dimension and shift factors of the circulant matrices of the given sparse parity-check matrix are adjusted according to the test results of both girth 4 and girth 6.To solve the second problem,an approach of irregular QC LDPC codes is proposed.The proposed approach is to replace some sub-matrices by zero matrices and identity matrices at special positions in the given sparse parity-check matrix so as to get a nonsingular square matrix for the construction of the generator matrix.Though adopting bidiagonal submatrices in parity-check matrix can solve the rows' dependency problem,many code words with low weights will occur,which leads to the BER performance can not be better by increasing code lengths.Examples are provided for the proposed design of QC LDPC codes,and computer simulation results show that the proposed QC LDPC codes achieve good BER performance.