Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1210.5942 · Physical Review A

Active optical frequency standard using sequential coupling of atomic ensembles

Georgy A. Kazakov, Thorsten Schumm

Published Jan 18, 2013• 48 citations
arXivHTMLPDF

Abstract

Recently, several theoretical proposals addressed the generation of an active optical frequency standard based on atomic ensembles trapped in an optical lattice potential inside an optical resonator. Using atoms with a narrow linewidth transition and population inversion together with a ``bad'' cavity allows us to realize the super-radiant photon emission regime. These schemes reduce the influence of mechanical or thermal vibrations of the cavity mirrors on the emitted optical frequency, overcoming current limitation in passive optical standards. The coherence time of the emitted light is ultimately limited by the lifetime of the atoms in the optical lattice potential. Therefore these schemes would produce one light pulse per atomic ensemble without a phase relation between pulses. Here we study how phase coherence between pulses can be maintained by using several inverted atomic ensembles, introduced into the cavity sequentially by means of a transport mechanism. We simulate the light emission process using the Heisenberg-Langevin approach and study the frequency noise of the intracavity field.

DOI
10.1103/physreva.87.013821

Related papers

An active optical frequency reference using a pulsed superradiant laser

Juan Muniz Silva, Julia Cline, James K. Thompson +1 more

We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.

Optical and Quantum Sensing and Precision Metrology II•Mar 1, 2019•4 citations

Self-ordering, cooling, and lasing in an ensemble of clock atoms

Anna A. Bychek, Laurin Ostermann, Helmut Ritsch

Active atomic clocks are predicted to provide far better short-term stability and robustness against thermal fluctuations than typical feedback-based optical atomic clocks. However, continuous laser operation using an ensemble of clock atoms still remains an experimentally challenging task. We study spatial self-organization in a transversely driven ensemble of clock atoms inside an optical resonator and coherent light emission from the cavity. We focus on the spectral properties of the emitted light in the narrow atomic linewidth regime, where the phase coherence providing frequency stability is stored in the atomic dipoles rather than the cavity field. The atoms are off-resonantly driven by a standing-wave coherent laser transversely to the cavity axis, allowing for atomic motion along the cavity axis as well as along the pump. In order to treat larger atom numbers we employ a second-order cumulant expansion which allows us to calculate the spectrum of the cavity light field. We identify the self-organization threshold where the atoms align themselves in a checkerboard pattern, thus maximizing light scattering into the cavity, which simultaneously induces cooling. For a larger driving intensity, more atoms are transferred to the excited state, reducing cooling but increasing light emission from the excited atoms. This can be enhanced via a second cavity mode at the atomic frequency spatially shifted by a quarter wavelength. For large enough atom numbers we observe laser-like emission close to the bare atomic transition frequency.

Physical Review A•Jan 6, 2025•5 citations

Different ways to active optical frequency standards

Duo Pan, Xiaobo Xue, Xiaogang Zhang +1 more

Active optical frequency standard, or active optical clock, is a new concept of optical frequency standard, where a weak feedback with phase coherence information in optical bad-cavity limitation is formed, and the continuous self-sustained coherent stimulated emission between two atomic transition levels with population inversion is realized. Through ten years of both theoretical and experimental exploration, the narrow linewidth and suppression of cavity pulling effect of active optical frequency standard have been initially proved. In this paper, after a simple review, we will mainly present the most recent experimental progresses of active optical frequency standards in Peking University, including 4-level cesium active optical frequency standards and active Faraday optical frequency standards. The future development of active optical frequency standards is also discussed.

Journal of Physics Conference Series•Jun 1, 2016•1 citation

Active optical frequency standards using cold atoms: Perspectives and challenges

Georgy A. Kazakov, Thorsten Schumm

We consider various approaches to the creation of a high-stability active optical frequency standard, where the atomic ensemble itself produces a highly stable and accurate frequency signal. The short-time frequency stability of such standards may overcome the stability of lasers stabilized to macroscopic cavities which are used as local oscillators in the modern optical frequency standard systems. The main idea is to create a “superradiant” laser operating deep in the bad cavity regime, where the decay rate of the cavity field significantly exceeds the decoherence rate of the lasing transition. Two main approaches towards the realization of an active optical frequency standard have been proposed already: the optical lattice laser, and the atomic beam laser. We consider these and some alternative approaches, and discuss the parameters for atomic ensembles necessary to attain the metrology relevant level of short-time frequency stability, and various effects and main challenges critical for practical implementations.

arXiv:1503.03998•European Frequency and Time Forum•Jun 1, 2014•21 citations

A quasi-continuous superradiant Raman laser with < 1 intracavity photon

Justin Bohnet, Zilong Chen, Joshua M. Weiner +4 more

Steady-state collective emission from ensembles of laser cooled atoms has been proposed as a method for generating sub-millihertz linewidth optical lasers, with potential for broad impacts across science and technology. We have built a model system that tests key predictions for such active oscillators using a Raman laser with laser cooled atoms as the gain medium. The laser operates deep in the bad-cavity, or superradiant, regime of laser physics, where the cavity decay rate is much greater than the atomic coherence decay rate. Specifically, we demonstrate that a system of 106 87Rb atoms trapped in a 1D standing wave optical lattice can spontaneously synchronize and collectively emit a quasi-continuous coherent optical output, even when the intracavity field contains on average < 1 photon.

EPJ Web of Conferences•Jan 1, 2013•5 citations

Towards passive and active laser stabilization using cavity-enhanced atomic interaction

Stefan Alaric Schäffer, Bjarke Bak Christensen, S M Rathmann +3 more

Ultra stable frequency references such as the ones used in optical atomic clocks and for quantum metrology may be obtained by stabilizing a laser to an optical cavity that is stable over time. State-of-the-art frequency references are constructed in this way, but their stabilities are currently limited by thermally induced length fluctuations in the reference cavity. Several alternative approaches using the potential for frequency discriminating of highly forbidden narrow atomic transitions have been proposed in, e.g., [1] and [2]. In this proceeding we will present some of the ongoing experimental efforts derived from these proposals, to use cavity-enhanced interaction with atomic 88 Sr samples as a frequency reference for laser stabilization. Such systems can be realized using both passive and active approaches where either the atomic phase response is used as an error signal, or the narrow atomic transition itself is used as a source for a spectrally pure laser. Both approaches shows the promise of being able to compete with the current state of the art in stable lasers and have similar limitations on their ultimately achievable linewidths [1, 2].

Journal of Physics Conference Series•Feb 1, 2017•6 citations
Recently, several theoretical proposals addressed the generation of an active optical frequency standard based on atomic ensembles trapped in an optical lattice potential inside an optical resonator. Using atoms with a narrow linewidth transition and population inversion together with a ``bad'' cavity allows us to realize the super-radiant photon emission regime. These schemes reduce the influence of mechanical or thermal vibrations of the cavity mirrors on the emitted optical frequency, overcoming current limitation in passive optical standards. The coherence time of the emitted light is ultimately limited by the lifetime of the atoms in the optical lattice potential. Therefore these schemes would produce one light pulse per atomic ensemble without a phase relation between pulses. Here we study how phase coherence between pulses can be maintained by using several inverted atomic ensembles, introduced into the cavity sequentially by means of a transport mechanism. We simulate the light emission process using the Heisenberg-Langevin approach and study the frequency noise of the intracavity field.
We will describe a next-generation active atomic frequency reference based on super-radiant pulses of laser light from the ultra-narrow, 1 mHz linewidth, optical clock transition in an ensemble of cold 87Sr atoms. Light is stimulated from the millihertz linewidth transition by confining an ensemble of laser cooled atoms inside of a high finesse optical cavity. Such a light source has been proposed as a next-generation active atomic frequency reference, with the potential to enable high-precision optical frequency references to be used outside laboratory environments. We achieve a remarkable short term fractional frequency stability, 6.7 × 1016 at 1 s of averaging, absolute accuracy, 2 Hz (4 × 1015 fractional frequency), and high insensitivity to changes in the cavity length that limits the performance of todays more stable lasers. We will also discuss current work on cavity-enhanced dispersive measurements to perform high resolution spectroscopy and atom counting.
Active atomic clocks are predicted to provide far better short-term stability and robustness against thermal fluctuations than typical feedback-based optical atomic clocks. However, continuous laser operation using an ensemble of clock atoms still remains an experimentally challenging task. We study spatial self-organization in a transversely driven ensemble of clock atoms inside an optical resonator and coherent light emission from the cavity. We focus on the spectral properties of the emitted light in the narrow atomic linewidth regime, where the phase coherence providing frequency stability is stored in the atomic dipoles rather than the cavity field. The atoms are off-resonantly driven by a standing-wave coherent laser transversely to the cavity axis, allowing for atomic motion along the cavity axis as well as along the pump. In order to treat larger atom numbers we employ a second-order cumulant expansion which allows us to calculate the spectrum of the cavity light field. We identify the self-organization threshold where the atoms align themselves in a checkerboard pattern, thus maximizing light scattering into the cavity, which simultaneously induces cooling. For a larger driving intensity, more atoms are transferred to the excited state, reducing cooling but increasing light emission from the excited atoms. This can be enhanced via a second cavity mode at the atomic frequency spatially shifted by a quarter wavelength. For large enough atom numbers we observe laser-like emission close to the bare atomic transition frequency.
Active optical frequency standard, or active optical clock, is a new concept of optical frequency standard, where a weak feedback with phase coherence information in optical bad-cavity limitation is formed, and the continuous self-sustained coherent stimulated emission between two atomic transition levels with population inversion is realized. Through ten years of both theoretical and experimental exploration, the narrow linewidth and suppression of cavity pulling effect of active optical frequency standard have been initially proved. In this paper, after a simple review, we will mainly present the most recent experimental progresses of active optical frequency standards in Peking University, including 4-level cesium active optical frequency standards and active Faraday optical frequency standards. The future development of active optical frequency standards is also discussed.
We consider various approaches to the creation of a high-stability active optical frequency standard, where the atomic ensemble itself produces a highly stable and accurate frequency signal. The short-time frequency stability of such standards may overcome the stability of lasers stabilized to macroscopic cavities which are used as local oscillators in the modern optical frequency standard systems. The main idea is to create a “superradiant” laser operating deep in the bad cavity regime, where the decay rate of the cavity field significantly exceeds the decoherence rate of the lasing transition. Two main approaches towards the realization of an active optical frequency standard have been proposed already: the optical lattice laser, and the atomic beam laser. We consider these and some alternative approaches, and discuss the parameters for atomic ensembles necessary to attain the metrology relevant level of short-time frequency stability, and various effects and main challenges critical for practical implementations.
Steady-state collective emission from ensembles of laser cooled atoms has been proposed as a method for generating sub-millihertz linewidth optical lasers, with potential for broad impacts across science and technology. We have built a model system that tests key predictions for such active oscillators using a Raman laser with laser cooled atoms as the gain medium. The laser operates deep in the bad-cavity, or superradiant, regime of laser physics, where the cavity decay rate is much greater than the atomic coherence decay rate. Specifically, we demonstrate that a system of 106 87Rb atoms trapped in a 1D standing wave optical lattice can spontaneously synchronize and collectively emit a quasi-continuous coherent optical output, even when the intracavity field contains on average < 1 photon.
Ultra stable frequency references such as the ones used in optical atomic clocks and for quantum metrology may be obtained by stabilizing a laser to an optical cavity that is stable over time. State-of-the-art frequency references are constructed in this way, but their stabilities are currently limited by thermally induced length fluctuations in the reference cavity. Several alternative approaches using the potential for frequency discriminating of highly forbidden narrow atomic transitions have been proposed in, e.g., [1] and [2]. In this proceeding we will present some of the ongoing experimental efforts derived from these proposals, to use cavity-enhanced interaction with atomic 88 Sr samples as a frequency reference for laser stabilization. Such systems can be realized using both passive and active approaches where either the atomic phase response is used as an error signal, or the narrow atomic transition itself is used as a source for a spectrally pure laser. Both approaches shows the promise of being able to compete with the current state of the art in stable lasers and have similar limitations on their ultimately achievable linewidths [1, 2].