We demonstrate quantum bath engineering for a superconducting artificial atom coupled to a microwave cavity. By tailoring the spectrum of microwave photon shot noise in the cavity, we create a dissipative environment that autonomously relaxes the atom to an arbitrarily specified coherent superposition of the ground and excited states. In the presence of background thermal excitations, this mechanism increases state purity and effectively cools the dressed atom state to a low temperature.
We demonstrate quantum bath engineering for a superconducting artificial atom coupled to a microwave cavity. By tailoring the spectrum of microwave photon shot noise in the cavity, we create a dissipative environment that autonomously relaxes the atom to an arbitrarily specified coherent superposition of the ground and excited states. In the presence of background thermal excitations, this mechanism increases state purity and effectively cools the dressed atom state to a low temperature.
We demonstrate how the dissipative interaction between a superconducting qubit and a microwave photonic crystal can be used for quantum bath engineering. The photonic crystal is created with a step-impedance transmission line which suppresses and enhances the quantum spectral density of states, influencing decay transitions of a transmon circuit. The qubit interacts with the transmission line indirectly via dispersive coupling to a cavity. We characterize the photonic crystal density of states from both the unitary and dissipative dynamics of the qubit. When the qubit is driven, it dissipates into the frequency dependent density of states of the photonic crystal. Our result is the deterministic preparation of qubit superposition states as the steady state of coherent driving and dissipation near the photonic crystal band edge, which we characterize with quantum state tomography. Our results highlight how the multimode environment from the photonic crystal forms a resource for quantum control.
We study photon condensation phenomena in a driven and dissipative array of superconducting microwave resonators.Specifically, we show that by using an appropriately designed coupling of microwave photons to superconducting qubits, an effective dissipative mechanism can be engineered, which scatters photons towards low-momentum states while conserving their number.This mimics a tunable coupling of bosons to a low-temperature bath, and leads to the formation of a stationary photon condensate in the presence of losses and under continuous-driving conditions.In this paper, we propose a realistic experimental setup to observe this effect in two or multiple coupled cavities, and study the characteristics of such an out-of-equilibrium condensate, which arise from the competition between pumping and dissipation processes.
We demonstrated microwave-induced cooling in a superconducting flux qubit. The thermal population in the first-excited state of the qubit is driven to a higher-excited state by way of a sideband transition. Subsequent relaxation into the ground state results in cooling. Effective temperatures as low as approximately 3 millikelvin are achieved for bath temperatures of 30 to 400 millikelvin, a cooling factor between 10 and 100. This demonstration provides an analog to optical cooling of trapped ions and atoms and is generalizable to other solid-state quantum systems. Active cooling of qubits, applied to quantum information science, provides a means for qubit-state preparation with improved fidelity and for suppressing decoherence in multi-qubit systems.
A primary challenge in quantum science and technology is to isolate the fragile quantum states from their environment in order to prevent the irreversible leakage of energy and information which causes decoherence. In the late 1990s, however, a new paradigm emerged, in which the environment itself, as well as the coupling to this environment of the quantum state, are engineered in ways which, counterintuitively, facilitate the creation and stabilization of desired quantum properties. This paradigm, coined reservoir engineering, has been pursued experimentally in various implementations, in which the states of trapped ions, atomic clouds or artificial atoms based on superconducting circuits were driven into a desired target state using a dissipative reservoir. In all these cases, the cold electromagnetic environment served as the engineered reservoir, capitalizing on the tremendous progress in the ability to shape the modes of the electromagnetic field using masers and lasers. In optomechanics, which is the study of the coupling between light and mechanical motion, a similar scenario has been prevalent. Light is used to read out and control the mechanical motion, and in the past few years, various optomechanical architectures both in the optical and microwave domain have enabled to push mechanical systems into the quantum regime. These results can be interpreted in the context of reservoir engineering: cooling and many other optomechanical phenomena exploit the cold, dissipative nature of light. This thesis reports on the development of a multimode superconducting circuit with a mechanically compliant element - fitting into the field of circuit cavity electromechanics -, with which we pursue two themes. In the first set of experiments, reversing the roles of dissipation described above, we engineer the mechanical oscillator into a cold, dissipative environment for microwave light. The mechanical element is the fundamental mode of a free-standing top electrode of a capacitor, 100 nm thick and 32 micron in diameter made of aluminum with an effective mass of around 170 pg, vibrating at a resonance frequency of 5.5 MHz. The dissipative mechanical reservoir is prepared using an auxiliary microwave mode with engineered parameters.We utilize it to control the properties - in particular, the susceptibility - of the electromagnetic field and to perform low-noise amplification close to the quantum limit. The noise analysis reveals that the reservoir is close to its quantum ground state with a mean thermal occupation number well below 1, demonstrating its utility as a resource in the quantum regime. We also show that the system can be driven to the parametric instability threshold, above which self-sustained oscillations of the microwave field (masing) is observed. Finally, we demonstrate injection locking of the maser using an external seed pump. In a second set of experiments, a similar electromechanical circuit is used to implement a microwave isolator based on optomechanical interactions. The overarching theme is that dissipation of the mechanical oscillator, albeit intrinsic and not engineered via an auxiliary mode s a key ingredient for the device to function as a nonreciprocal frequency converter and isolator. In these experiments, an additional mechanical mode is used, such that a 4-mode optomechanical plaquette is realized.
While dephasing noise often hinders quantum devices, it can become an asset for quantum thermal machines. Here we demonstrate a three-level thermal machine that leverages noise-assisted quantum transport to enable steady-state cooling of microwave modes. The device exploits symmetry-selective couplings between a superconducting artificial molecule and two physical heat baths. Each bath consists of a microwave waveguide populated with synthesized quasithermal radiation. Energy transport is enabled by injecting dephasing noise through a third channel longitudinally coupled to one artificial atom of the molecule. By varying the effective temperatures of the reservoirs and measuring photonic heat currents with sub-attowatt resolution, we demonstrate energy flow dynamics characteristic of a quantum heat engine, thermal accelerator, and refrigerator. Our work constitutes an experimental demonstration of the key operating principles of a noise-assisted three-level quantum refrigerator and opens new avenues for experiments in quantum thermodynamics using superconducting circuits coupled to physical heat baths.
We develop a theoretical framework for cooling a microwave cavity mode using a Poisson stream of internally correlated pairs of two-level systems and analyze its performance under realistic dissipation. Starting from a Lindblad model of a phonon-tethered cavity interacting with sequentially injected atom pairs, we derive closed-form expressions for the steady-state cavity occupation and effective temperature. Two coupling geometries are examined: a one-atom configuration, where only one member of each pair interacts with the cavity, and a two-atom configuration, where both atoms couple collectively. The single-atom model enables cooling below the phonon bath but not below the reservoir temperature, whereas the two-atom scheme exhibits enhanced refrigeration - pair correlations modify the cavity's upward and downward transition rates so that the steady-state temperature can fall well below that of the reservoir for weak phonon damping. We map the parameter space including detuning, coupling strength, damping, and intra-pair exchange, identifying cooling valleys near resonance and the crossover between reservoir- and phonon-dominated regimes. The two-atom configuration thus realizes a genuine quantum-enhanced cooling mechanism absent in the single-atom case. We further outline an experimental implementation using two superconducting qubits repeatedly prepared, coupled, and reset inside a 3D cavity. Realistic reset and flux-tuning protocols support MHz-rate interaction cycles, enabling engineered reservoirs to impose cavity temperatures of 50-120 mK even when the cryostat is at ~1 K, offering a pathway to autonomous, on-chip refrigeration of microwave modes in scalable quantum hardware.