Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1205.6379 · Physical Review A

Loading of a surface-electrode ion trap from a remote, precooled source

Jeremy Sage, Andrew J. Kerman, John Chiaverini

Published Jul 20, 2012• 48 citations
arXivHTMLPDF

Abstract

We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\ensuremath{\sim}$${10}^{6}$ neutral ${}^{88}$Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum-information processing with trapped ions in large, low-depth surface-trap arrays that are not amenable to loading from a hot atomic beam.

DOI
10.1103/physreva.86.013417

Related papers

Bright source of cold ions for surface-electrode traps

Marko Cetina, Andrew T. Grier, Jonathan Campbell +2 more

We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as $0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}$ are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.

arXiv:physics/0702025•Physical Review A•Oct 24, 2007•52 citations

Ablation loading of barium ions into a surface-electrode trap

Xiaoyang Shi, Susanna Todaro, Gabriel Mintzer +3 more

Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.

arXiv:2303.02143•Applied Physics Letters•Jun 26, 2023•6 citations

Efficient isotope-selective pulsed laser ablation loading of 174Yb+ ions in a surface electrode trap

Geert Vrijsen, Yuhi Aikyo, Robert Spivey +2 more

ions in a surface electrode ion trap by using single pulses from a Q-switched Nd:YAG laser to ablate neutral atoms, combined with a two-photon photo-ionization process. The method is three orders of magnitude faster to load a single ion as compared to traditional resistively heated sources and can load large collections of ions in seconds. The negligible thermal load of this method enables the use of this ablation-based loading scheme in ion traps operating under cryogenic conditions.

Optics Express•Nov 5, 2019•24 citations

Scalable loading of a two-dimensional trapped-ion array

Colin Bruzewicz, Robert McConnell, John Chiaverini +1 more

Two-dimensional arrays of trapped-ion qubits are attractive platforms for scalable quantum information processing. Sufficiently rapid reloading capable of sustaining a large array, however, remains a significant challenge. Here with the use of a continuous flux of pre-cooled neutral atoms from a remotely located source, we achieve fast loading of a single ion per site while maintaining long trap lifetimes and without disturbing the coherence of an ion quantum bit in an adjacent site. This demonstration satisfies all major criteria necessary for loading and reloading extensive two-dimensional arrays, as will be required for large-scale quantum information processing. Moreover, the already high loading rate can be increased by loading ions in parallel with only a concomitant increase in photo-ionization laser power and no need for additional atomic flux.

arXiv:1511.03293•Nature Communications•Sep 28, 2016•50 citations

Rapid all-optical loading of trapped ions using a miniaturised atom source

Lorenzo Versini, Tim F. Wohlers-Reichel, Catherine E. J. Challoner +8 more

We characterise an efficient optically-heated neutral atom source for ion trapping. We observe loading rates of up to $24(3)\,\mathrm{s}^{-1}$ with heating powers below $85\,\mathrm{mW}$, and demonstrate loading of a single ion in under $30\,\mathrm{s}$ with $41.4(4)\,\mathrm{mW}$ of optical power in a room-temperature ion trap system with an ionisation probability of $1.50(5)\times10^{-5}$. We calibrate a thermal model for the source's internal temperature by imaging the fluorescence of a collimated flux of neutral calcium that effuses from the oven at various optical heating powers. We show that the thermal performance of this oven is mainly limited by radiative losses. We explore the effect of second-stage photo-ionisation laser power on the loading rate, and identify a path beyond the loading rates reported in this study. We predict that this source is also well-suited to a wide range of metals used in ion-trapping.

physics.atom-phCross-listedarXiv:2512.10514•Physical Review Applied•Dec 12, 2025•0 citations

Isotope-selective Ion trapping via sympathetic cooling using a surface-electrode trap with a hole for collimated atomic loading

Masanari Miyamoto, Takashi Higuchi, Kentaro Furusawa +3 more

We developed a surface-electrode ion trap with a square hole measuring [Formula: see text] for atomic loading. The hole was fabricated using anisotropic etching of a silicon substrate and was designed to minimize potential distortion in the trapping region. By introducing the atomic beam through the hole, we achieved enhanced isotope selectivity and experimentally demonstrated the selective trapping of calcium isotope ions using an atomic oven. We successfully prepared isotope ion pairs directly from the oven via sympathetic cooling at a rate comparable to that achieved using ablation loading. The sympathetic cooling process occurred on the order of a few seconds. We demonstrated the direct generation of an ion chain above the through-hole. This approach can be applied for trapping a wide range of ion species using a remarkably simple experimental setup, making it desirable for several applications such as quantum-charge-coupled-device (QCCD) architectures and precision measurements of isotope shifts.

arXiv:2505.05002•Scientific Reports•Dec 2, 2025•0 citations
We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load \ensuremath{\sim}$${10}^{6} neutral 88{}^{88}88Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum-information processing with trapped ions in large, low-depth surface-trap arrays that are not amenable to loading from a hot atomic beam.
We produce large numbers of low-energy ions by photoionization of laser-cooled atoms inside a surface-electrode-based Paul trap. The isotope-selective trap's loading rate of $4\ifmmode\times\else\texttimes\fi{}{10}^{5}\phantom{\rule{0.3em}{0ex}}{\mathrm{Yb}}^{+}\phantom{\rule{0.3em}{0ex}}\mathrm{ions}∕\mathrm{s}$ exceeds that attained by photoionization (electron-impact ionization) of an atomic beam by three (six) orders of magnitude. Traps as shallow as 0.13eV0.13\phantom{\rule{0.3em}{0ex}}\mathrm{eV}0.13eV are easily loaded with this technique. The ions are confined in the same spatial region as the laser-cooled atoms, which will allow the experimental investigation of interactions between cold ions and cold atoms or Bose-Einstein condensates.
Trapped-ion quantum information processing may benefit from qubits encoded in isotopes that are practically available in only small quantities, e.g., due to low natural abundance or radioactivity. Laser ablation provides a method of controllably liberating neutral atoms or ions from low-volume targets, but energetic ablation products can be difficult to confine in the small ion-electrode distance, micron-scale microfabricated traps amenable to high-speed, high-fidelity manipulation of ion arrays. Here, we investigate ablation-based ion loading into surface-electrode traps of different sizes to test a model describing ion loading probability as a function of effective trap volume and other trap parameters. We characterize loading of ablated barium from a metallic source in two cryogenic surface-electrode traps with 730 and 50 μm ion-electrode distances. Our loading rate agrees with a predictive analytical model, providing insight for the confinement of limited-quantity species of interest for quantum computing, simulation, and sensing.
Two-dimensional arrays of trapped-ion qubits are attractive platforms for scalable quantum information processing. Sufficiently rapid reloading capable of sustaining a large array, however, remains a significant challenge. Here with the use of a continuous flux of pre-cooled neutral atoms from a remotely located source, we achieve fast loading of a single ion per site while maintaining long trap lifetimes and without disturbing the coherence of an ion quantum bit in an adjacent site. This demonstration satisfies all major criteria necessary for loading and reloading extensive two-dimensional arrays, as will be required for large-scale quantum information processing. Moreover, the already high loading rate can be increased by loading ions in parallel with only a concomitant increase in photo-ionization laser power and no need for additional atomic flux.
We characterise an efficient optically-heated neutral atom source for ion trapping. We observe loading rates of up to 24(3) s−124(3)\,\mathrm{s}^{-1}24(3)s−1 with heating powers below 85 mW85\,\mathrm{mW}85mW, and demonstrate loading of a single ion in under 30 s30\,\mathrm{s}30s with 41.4(4) mW41.4(4)\,\mathrm{mW}41.4(4)mW of optical power in a room-temperature ion trap system with an ionisation probability of 1.50(5)×10−51.50(5)\times10^{-5}1.50(5)×10−5. We calibrate a thermal model for the source's internal temperature by imaging the fluorescence of a collimated flux of neutral calcium that effuses from the oven at various optical heating powers. We show that the thermal performance of this oven is mainly limited by radiative losses. We explore the effect of second-stage photo-ionisation laser power on the loading rate, and identify a path beyond the loading rates reported in this study. We predict that this source is also well-suited to a wide range of metals used in ion-trapping.
We developed a surface-electrode ion trap with a square hole measuring [Formula: see text] for atomic loading. The hole was fabricated using anisotropic etching of a silicon substrate and was designed to minimize potential distortion in the trapping region. By introducing the atomic beam through the hole, we achieved enhanced isotope selectivity and experimentally demonstrated the selective trapping of calcium isotope ions using an atomic oven. We successfully prepared isotope ion pairs directly from the oven via sympathetic cooling at a rate comparable to that achieved using ablation loading. The sympathetic cooling process occurred on the order of a few seconds. We demonstrated the direct generation of an ion chain above the through-hole. This approach can be applied for trapping a wide range of ion species using a remarkably simple experimental setup, making it desirable for several applications such as quantum-charge-coupled-device (QCCD) architectures and precision measurements of isotope shifts.