© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:1205.3927 · Optics Express

Cold atom guidance in a capillary using blue-detuned, hollow optical modes

J. A. Pechkis, Fredrik K. Fatemi

Published May 31, 2012• 21 citations

Abstract

We demonstrate guiding of cold 85Rb atoms through a 100-micron-diameter hollow core dielectric waveguide using cylindrical hollow modes. We have transported atoms using blue-detuned light in the 1st order, azimuthally-polarized TE01 hollow mode, and the 2nd order hollow modes (HE31, EH11, and HE12), and compared these results with guidance in the red-detuned, fundamental HE11 mode. The blue-detuned hollow modes confine atoms to low intensity along the capillary axis, far from the walls. We determine scattering rates in the guides by directly measuring the effect of recoil on the atoms. We observe higher atom numbers guided using red-detuned light in the HE11 mode, but a 10-fold reduction in scattering rate using the 2nd order modes, which have an r4 radial intensity profile to lowest order. We show that the red-detuned guides can be used to load atoms into the blue-detuned modes when both high atom number and low perturbation are desired.

DOI: 10.1364/oe.20.013409

Related papers

A Novel Atomic Guiding Using a Blue-Detuned TE0i Mode in Hollow Metallic Waveguides

Meng Dai, 印建平

We propose a novel scheme to guide cold atoms using a blue-detuned TE01 doughnut mode in a hollow metallic aveguide, calculate the electromagnetic field distribution of the TErn mode in the hollow metallic waveguide,and compare the attenuation characters of the EH11 and TErn mode in the hollow metallic waveguide. We also alculate the optical potential of the TErn doughnut mode for two-level ^85Rb atoms and estimate the photon cattering rate. It is found that when the detuning δ = 300 GHz, the photon scattering induced heating can e neglected, and the optical potential (Umax=570 mK) of the TErn mode is high enough to load cold atoms(120μK) from a standard magneto-optical trap and to guide them in the hollow metallic waveguide, which is a esirable scheme to realize a computer-controlled atom lithography with an arbitrary pattern.

Chinese Physics Letters•Jan 1, 2005•0 citations

Guiding of Rb atoms by capillary optical fibres

Agata Iwaniuk, Jan Dorosz

Atom guidance in capillary hollow fibres is discussed in detail. The main properties and the differences between the guidance with the blue and red detuning are described. Since the blue guiding has several advantages over the red guiding we focus on this type of guidance. Rubidium atoms are ideal for investigating atom transport by reason of their quantum properties. The influence of capillary features (radius of the hole, radius of the core, refractive index of the core) on transmission parameters is investigated and described in detail.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 21, 2007•0 citations

Evanescent-wave guiding of atoms in hollow optical fibers

Michael J. Renn, Elizabeth A. Donley, Eric Cornell +2 more

We use evanescent laser light to guide atoms through hollow-core optical fibers. The light, detuned to the blue side of rubidium's ${D}_{2}$ resonance lines, is launched into the glass region of a hollow capillary fiber and guided through the fiber by total internal reflection from the glass walls. Atoms interacting with the evanescent component of the field are repelled from the wall and guided through the fiber hollow. A second laser tuned to the red side of resonance is used to initially inject the atoms into the evanescent guide. An optical intensity threshold for guiding is observed as the evanescent-field-induced dipole forces exceed the van der Waals forces.

Physical Review A•Feb 1, 1996•148 citations

A Novel Atomic Guiding Using a Blue-Detuned TE 01 Mode in Hollow Metallic Waveguides

Meng Dai, Yin Jian-Ping

We propose a novel scheme to guide cold atoms using a blue-detuned TE 01 doughnut mode in a hollow metallic waveguide, calculate the electromagnetic field distribution of the TE 01 mode in the hollow metallic waveguide, and compare the attenuation characters of the EH 11 and TE 01 mode in the hollow metallic waveguide. We also calculate the optical potential of the TE 01 doughnut mode for two-level 85 Rb atoms and estimate the photon scattering rate. It is found that when the detuning δ = 300 GHz, the photon scattering induced heating can be neglected, and the optical potential ( U max ≈570 mK) of the TE 01 mode is high enough to load cold atoms (120 μK) from a standard magneto-optical trap and to guide them in the hollow metallic waveguide, which is a desirable scheme to realize a computer-controlled atom lithography with an arbitrary pattern.

Chinese Physics Letters•Apr 14, 2005•9 citations

Cold atom guidance using a binary spatial light modulator

Fredrik K. Fatemi, Mark Bashkansky

We have guided cold (85)Rb atoms in a blue-detuned, high-order hollow laser beam generated by a binary spatial light modulator. The binary holograms written to the modulator produce smooth hollow laser beams with steep intensity walls that can be updated with a 1.6 kHz refresh rate. We analyze the guiding laser beams numerically and experimentally, and show that the atoms are exposed to an average intensity that is ~2% of the maximum intensity of the guide at a laser detuning of 1 GHz and 2 mW of optical power.

Optics Express•Feb 20, 2006•38 citations

Laser-Guided Atoms in Hollow-Core Optical Fibers

Michael J. Renn, Don Montgomery, O. Vdovin +3 more

We have used optical forces to guide atoms through hollow-core optical fibers. Laser light is launched into the hollow region of a glass capillary fiber and guided by grazing-incidence reflection from the walls. When the laser is detuned 1--30 GHz red of the Rb D2 resonance lines, dipole forces attract atoms to the high-intensity region along the axis and guide them through the fiber. We show that atoms may be guided around bends in the fiber and that in initial experiments the atoms experience up to 18 reflections from the potential walls with minimal loss.

Physical Review Letters•Oct 30, 1995•307 citations

We demonstrate guiding of cold 85Rb atoms through a 100-micron-diameter hollow core dielectric waveguide using cylindrical hollow modes. We have transported atoms using blue-detuned light in the 1st order, azimuthally-polarized TE01 hollow mode, and the 2nd order hollow modes (HE31, EH11, and HE12), and compared these results with guidance in the red-detuned, fundamental HE11 mode. The blue-detuned hollow modes confine atoms to low intensity along the capillary axis, far from the walls. We determine scattering rates in the guides by directly measuring the effect of recoil on the atoms. We observe higher atom numbers guided using red-detuned light in the HE11 mode, but a 10-fold reduction in scattering rate using the 2nd order modes, which have an r4 radial intensity profile to lowest order. We show that the red-detuned guides can be used to load atoms into the blue-detuned modes when both high atom number and low perturbation are desired.

We propose a novel scheme to guide cold atoms using a blue-detuned TE01 doughnut mode in a hollow metallic aveguide, calculate the electromagnetic field distribution of the TErn mode in the hollow metallic waveguide,and compare the attenuation characters of the EH11 and TErn mode in the hollow metallic waveguide. We also alculate the optical potential of the TErn doughnut mode for two-level ^85Rb atoms and estimate the photon cattering rate. It is found that when the detuning δ = 300 GHz, the photon scattering induced heating can e neglected, and the optical potential (Umax=570 mK) of the TErn mode is high enough to load cold atoms(120μK) from a standard magneto-optical trap and to guide them in the hollow metallic waveguide, which is a esirable scheme to realize a computer-controlled atom lithography with an arbitrary pattern.

Atom guidance in capillary hollow fibres is discussed in detail. The main properties and the differences between the guidance with the blue and red detuning are described. Since the blue guiding has several advantages over the red guiding we focus on this type of guidance. Rubidium atoms are ideal for investigating atom transport by reason of their quantum properties. The influence of capillary features (radius of the hole, radius of the core, refractive index of the core) on transmission parameters is investigated and described in detail.

We use evanescent laser light to guide atoms through hollow-core optical fibers. The light, detuned to the blue side of rubidium's

{D}_{2}

resonance lines, is launched into the glass region of a hollow capillary fiber and guided through the fiber by total internal reflection from the glass walls. Atoms interacting with the evanescent component of the field are repelled from the wall and guided through the fiber hollow. A second laser tuned to the red side of resonance is used to initially inject the atoms into the evanescent guide. An optical intensity threshold for guiding is observed as the evanescent-field-induced dipole forces exceed the van der Waals forces.

We propose a novel scheme to guide cold atoms using a blue-detuned TE 01 doughnut mode in a hollow metallic waveguide, calculate the electromagnetic field distribution of the TE 01 mode in the hollow metallic waveguide, and compare the attenuation characters of the EH 11 and TE 01 mode in the hollow metallic waveguide. We also calculate the optical potential of the TE 01 doughnut mode for two-level 85 Rb atoms and estimate the photon scattering rate. It is found that when the detuning δ = 300 GHz, the photon scattering induced heating can be neglected, and the optical potential ( U max ≈570 mK) of the TE 01 mode is high enough to load cold atoms (120 μK) from a standard magneto-optical trap and to guide them in the hollow metallic waveguide, which is a desirable scheme to realize a computer-controlled atom lithography with an arbitrary pattern.

We have guided cold (85)Rb atoms in a blue-detuned, high-order hollow laser beam generated by a binary spatial light modulator. The binary holograms written to the modulator produce smooth hollow laser beams with steep intensity walls that can be updated with a 1.6 kHz refresh rate. We analyze the guiding laser beams numerically and experimentally, and show that the atoms are exposed to an average intensity that is ~2% of the maximum intensity of the guide at a laser detuning of 1 GHz and 2 mW of optical power.

We have used optical forces to guide atoms through hollow-core optical fibers. Laser light is launched into the hollow region of a glass capillary fiber and guided by grazing-incidence reflection from the walls. When the laser is detuned 1--30 GHz red of the Rb D2 resonance lines, dipole forces attract atoms to the high-intensity region along the axis and guide them through the fiber. We show that atoms may be guided around bends in the fiber and that in initial experiments the atoms experience up to 18 reflections from the potential walls with minimal loss.