Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1203.4843 · Review of Scientific Instruments

Note: A monolithic filter cavity for experiments in quantum optics

Pantita Palittapongarnpim, Andrew MacRae, Alexander I. Lvovsky

Published Jun 1, 2012• 47 citations
arXivHTMLPDF

Abstract

By applying a high-reflectivity dielectric coating on both sides of a commercial plano-convex lens, we produce a stable monolithic Fabry-Perot cavity suitable for use as a narrow band filter in quantum optics experiments. The resonant frequency is selected by means of thermal expansion. Owing to the long term mechanical stability, no optical locking techniques are required. We characterize the cavity performance as an optical filter, obtaining a 45dB suppression of unwanted modes while maintaining a transmission of 60%.

DOI
10.1063/1.4726458

Related papers

Atomic line versus lens cavity filters: a comparison of their merits

Clare R. Higgins, Danielle Pizzey, Renju S. Mathew +1 more

We present a comparison between lens cavity filters and atomic line filters, discussing their relative merits for applications in quantum optics. We describe the design, characterization, and stabilization procedure of a lens cavity filter, which consists of a high-reflection coated commercially available plano-convex lens, and compare it to an ultra-narrow atomic band-pass filter utilizing the D2 absorption line in atomic rubidium vapor. We find that the cavity filter peak transmission frequency and bandwidth can be chosen arbitrarily but the transmission frequency is subject to thermal drift and the cavity needs stabilization to better than a few mK, while the atomic filter is intrinsically stable and tied to an atomic resonance frequency such that it can be used in a non-laboratory environment.

arXiv:2002.07708•OSA Continuum•Mar 27, 2020•12 citations

High Performance Fiber-Fabry-Perot Resonator Targeting Quantum Optics Applications

Jonathan P. Hedger, Tino Elsmann, Martin Becker +3 more

Quantum optics experiments frequently require the separation of single-photon-level signals from strong classical fields. In circumstances in which the signals are spectrally close, and one cannot make use of relatively simple separation methods based around differences in polarization state, optical mode, or beam direction, it is necessary to exploit the frequency difference itself as the means for signal separation. We have constructed and characterized an efficient and robust fiber-based filter, consisting of an all-fiber Fabry-Perot resonator, to achieve this goal. Our filter shows 31dB of suppression of unwanted signals and 76% transmission of the desired signal. The transmission of the filter was stabilized to within 2% of its maximum for over 35hours through simple temperature stabilization.

IEEE Photonics Technology Letters•Jun 17, 2020•10 citations

High-finesse fiber Fabry–Perot cavities: stabilization and mode matching analysis

J. Gallego, S. Ghosh, Seyed Khalil Alavi +4 more

Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.

arXiv:1508.05289•Applied Physics B•Mar 1, 2016•74 citations

High finesse optical fiber cavities: optimal alignment and robust stabilization (Conference Presentation)

Lothar Ratschbacher, Jose Gallego, Sutapa Ghosh +4 more

Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.

•Aug 3, 2016•0 citations

Compact stable fibre-based optical frequency filter

Jonathan P. Hedger, Andre Nicholas Luiten, Ben M. Sparkes

We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.

•Dec 30, 2019•0 citations

A stable fiber-based Fabry-Perot cavity

T. Steinmetz, A. Balocchi, Yves Colombe +4 more

We report the development of a fiber-based, tunable optical cavity with open access. The cavity is of the Fabry-Perot type and is formed with miniature spherical mirrors positioned on the end of single- or multi-mode optical fibers by a transfer technique which involves lifting a high-quality mirror from a smooth convex substrate, either a ball lens or micro-lens. The cavities typically have a finesse of $\\sim 1,000$ and a mode volume of 600 $\\mu$m$^3$. We demonstrate the detection of small ensembles of cold Rb atoms guided through such a cavity on an atom chip.

•Jun 27, 2006•61 citations
By applying a high-reflectivity dielectric coating on both sides of a commercial plano-convex lens, we produce a stable monolithic Fabry-Perot cavity suitable for use as a narrow band filter in quantum optics experiments. The resonant frequency is selected by means of thermal expansion. Owing to the long term mechanical stability, no optical locking techniques are required. We characterize the cavity performance as an optical filter, obtaining a 45dB suppression of unwanted modes while maintaining a transmission of 60%.
We present a comparison between lens cavity filters and atomic line filters, discussing their relative merits for applications in quantum optics. We describe the design, characterization, and stabilization procedure of a lens cavity filter, which consists of a high-reflection coated commercially available plano-convex lens, and compare it to an ultra-narrow atomic band-pass filter utilizing the D2 absorption line in atomic rubidium vapor. We find that the cavity filter peak transmission frequency and bandwidth can be chosen arbitrarily but the transmission frequency is subject to thermal drift and the cavity needs stabilization to better than a few mK, while the atomic filter is intrinsically stable and tied to an atomic resonance frequency such that it can be used in a non-laboratory environment.
Quantum optics experiments frequently require the separation of single-photon-level signals from strong classical fields. In circumstances in which the signals are spectrally close, and one cannot make use of relatively simple separation methods based around differences in polarization state, optical mode, or beam direction, it is necessary to exploit the frequency difference itself as the means for signal separation. We have constructed and characterized an efficient and robust fiber-based filter, consisting of an all-fiber Fabry-Perot resonator, to achieve this goal. Our filter shows 31dB of suppression of unwanted signals and 76% transmission of the desired signal. The transmission of the filter was stabilized to within 2% of its maximum for over 35hours through simple temperature stabilization.
Fiber Fabry–Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications, where they typically require precise stabilization of their optical resonances. Here, we study two different approaches to construct fiber Fabry–Perot resonators and stabilize their length for experiments in cavity quantum electrodynamics with neutral atoms. A piezo-mechanically actuated cavity with feedback based on the Pound–Drever–Hall locking technique is compared to a novel rigid cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. Furthermore, we present a general analysis of the mode matching problem in fiber Fabry–Perot cavities, which explains the asymmetry in their reflective line shapes and has important implications for the optimal alignment of the fiber resonators. Finally, we discuss the issue of fiber-generated background photons. We expect that our results contribute toward the integration of high-finesse fiber Fabry–Perot cavities into compact and robust quantum-enabled devices in the future.
Fiber Fabry-Perot cavities, formed by micro-machined mirrors on the end-facets of optical fibers, are used in an increasing number of technical and scientific applications. Some of the most promising areas of application of these optical micro-resonators with high finesse and small mode volume are in the field of quantum communication and information. The resonator-enhanced light-matter interaction, for instance, provide basis for the realization of efficient optical interfaces between stationary matter-based quantum nodes and flying single-photon qubits. To date fiber Fabry-Perot cavities have been successfully applied in experiments interfacing single photons with a wide range of quantum systems, including cold atoms, ions and solid state emitters as well as quantum optomechanical experiments. Here we address some important practical questions that arise during the experimental implementation of high finesse fiber Fabry-Perot cavities: How can optimal fiber cavity alignment be achieved and how can the efficiency of coupling light from the optical fibers to the cavity mode and vice versa be characterized? How should optical fiber cavities be constructed and stabilized to fulfill their potential for miniaturization and integration into robust scientific and technological devices that can operate outside of dedicated laboratory environments in the future? The first two questions we answer with an analytic mode matching calculation that relates the alignment dependent fiber-to-cavity mode-matching efficiency to the easily measurable dip in the reflected light power at the cavity resonance. Our general analysis provides a simple recipe for the optimal alignment of fiber Fabry-Perot cavities and moreover for the first time explains the asymmetry in their reflective line shapes. The latter question we explore by investigating a novel, intrinsically rigid fiber cavity design that makes use of the high passive stability of a monolithic cavity spacer and employs thermal self-locking and external temperature tuning. The performance of this novel approach is compared to a more traditional, piezomechanically-actuated resonator that is feedback stabilized to a reference laser based on the Pound-Drever-Hall locking technique. Finally, with the application of single photon interfacing in mind we discuss the issue of fiber-generated background photons in Fiber Fabry-Perot cavities. We believe that, due to their simplicity, compactness and robustness, rigid fiber cavities could be a promising solution for miniaturized, integratable and scalable cavity quantum electrodynamic devices and further applications of FFPC with similar requirements.
We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.
We report the development of a fiber-based, tunable optical cavity with open access. The cavity is of the Fabry-Perot type and is formed with miniature spherical mirrors positioned on the end of single- or multi-mode optical fibers by a transfer technique which involves lifting a high-quality mirror from a smooth convex substrate, either a ball lens or micro-lens. The cavities typically have a finesse of sim1,000\\sim 1,000sim1,000 and a mode volume of 600 mu\\mumum3^33. We demonstrate the detection of small ensembles of cold Rb atoms guided through such a cavity on an atom chip.