Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1202.5963 · Physical Review B

Magnetic hysteresis effects in superconducting coplanar microwave resonators

Daniel Bothner, T. Gaber, M. Kemmler, D. Koelle, R. Kleiner, S. Wünsch, M. Siegel

Published Jul 20, 2012• 69 citations
arXivHTMLPDF

Abstract

We performed transmission spectroscopy experiments on coplanar half-wavelength niobium resonators at temperature $T=4.2\phantom{\rule{0.16em}{0ex}}$K. We observe not only a strong dependence of the quality factor $Q$ and the resonance frequency ${f}_{\mathrm{res}}$ on an externally applied magnetic field but also on the magnetic history of our resonators, i.e., on the spatial distribution of trapped Abrikosov vortices in the device. This is valid for a broad range of frequencies and angles between the resonator plane and the magnetic field direction and holds for resonators with and without antidots near the edges of the center conductor and the ground planes. In a detailed analysis, we show that characteristic features of the experimental data can only be reproduced by calculations if we assume a highly inhomogeneous rf current density and a flux density gradient with maxima at the edges of the superconductor. We furthermore demonstrate that the hysteretic behavior of the resonator properties can be used to considerably reduce the vortex-induced losses and to fine-tune the resonance frequency by the proper way of cycling to a desired magnetic field value.

DOI
10.1103/physrevb.86.014517

Related papers

Improving the performance of superconducting microwave resonators in magnetic fields

Daniel Bothner, T. Gaber, M. Kemmler +2 more

The operation of superconducting coplanar waveguide cavities, as used for circuit quantum electrodynamics and kinetic inductance detectors, in perpendicular magnetic fields normally leads to a reduction of the device performance due to energy dissipating Abrikosov vortices. We experimentally investigate the vortex induced energy losses in such Nb resonators with different spatial distributions of micropatterned pinning sites (antidots) by transmission spectroscopy measurements at 4.2 K. In comparison to resonators without antidots we find a significant reduction of vortex induced losses and thus increased quality factors over a broad range of frequencies and applied powers in moderate fields.

arXiv:1101.3185•Applied Physics Letters•Mar 7, 2011•63 citations

Observation of individual vortex penetration in a coplanar superconducting resonator

Kirill Shulga, Shunsuke Nishimura, Pavel A. Volkov +7 more

We demonstrate the microwave signatures of individual Abrikosov-vortex penetration events in superconducting microwave resonators. $λ/4$ resonators with a narrowed region near the grounded end acting as a vortex trap were fabricated and studied using microwave transmission spectroscopy at millikelvin temperatures. Sharp stepwise drops in resonance frequency are detected as a function of increasing external magnetic field, attributed to the entry of individual Abrikosov vortices in the narrow region. This interpretation is confirmed by NV center magnetometry revealing discrete vortex entry events on increasing field and the absence of such drops in a device with a wider narrowed region. Our results establish a method to investigate and manipulate the states of Abrikosov vortices with microwaves access and readout vortex configurations using magnetic-field sweeps and microwave drive.

cond-mat.supr-conCross-listedarXiv:2512.00790•Physical Review Letters•Dec 2, 2025•1 citation

Current and magnetic field dependences of a superconducting coplanar waveguide resonator

Hodaka Kurokawa, Fuyuki Nabeshima, Atsutaka Maeda

Abstract We fabricated a superconducting coplanar waveguide resonator with leads for dc bias, which enables an ac conductivity measurement under dc bias. The current and magnetic field dependences of resonance properties were measured, and hysteretic behavior was observed as a function of the dc driving current. The observed shifts in the inverse of the quality factor, Q −1 , and the center frequency, f 0 , were explained by considering both motion of vortices and suppression of the order parameter by the dc current. Our investigation revealed that the strongly pinned vortices have a small influence on f 0 , while they still affect Q −1 . Our results indicate that the accurate understanding of the dynamics of driven vortices is indispensable for a control of the resonance properties with a high precision.

arXiv:1805.05131•Japanese Journal of Applied Physics•Feb 11, 2019•2 citations

Magnetic-Field-Resilient Superconducting Coplanar-Waveguide Resonators for Hybrid Circuit Quantum Electrodynamics Experiments

J.G. Kroll, Francesco Borsoi, Kian L. van der Enden +10 more

Superconducting coplanar waveguide resonators that can operate in strong magnetic fields are important for a variety of high-frequency superconducting devices. Magnetic fields degrade resonator performance by creating Abrikosov vortices that cause resistive losses and frequency fluctuations, or suppress the superconductivity entirely. To mitigate these effects, the authors investigate how device geometry and lithographically defined artificial defects can control vortex dynamics. These techniques allow the resonators to retain single-photon quality factors of about 10${}^{5}$ at ${B}_{\ensuremath{\parallel}}$ \ensuremath{\simeq} 6 T, for fast charge readout of a gate-defined double quantum dot at ${B}_{\ensuremath{\parallel}}$ = 1 T.

arXiv:1809.03932•Physical Review Applied•Jun 24, 2019•116 citations

Magnetic hysteresis of a superconducting microstrip resonator with a high edge barrier

Sangil Kwon, Yongchao Tang, Hamid Reza Mohebbi +2 more

We investigate the magnetic hysteresis of a superconducting microstrip resonator with a high edge barrier. We measure the magnetic hysteresis while either sweeping a magnetic field or tuning the edge barrier by high microwave current. We show that the magnetic hysteresis of such a device is qualitatively different from that of one without an edge barrier and can be understood based on the generalized critical-state model. In particular, we propose and demonstrate a simple and intuitive method that relies on a plot of the quality factor versus the resonance frequency for revealing the physical processes behind those hysteretic behaviors. Based on this, we find that the interplay between the Meisser current and vortex pinning is essential for understanding the magnetic hysteresis of such a device.

arXiv:1812.03227•Dec 7, 2018•0 citations

Characterization of harmonic modes and parasitic resonances in multi-mode superconducting coplanar resonators

Cenk Beydeda, Konstantin Nikolaou, Marius Tochtermann +8 more

Planar superconducting microwave transmission line resonators can be operated at multiple harmonic resonance frequencies. This allows covering wide spectral regimes with high sensitivity, as it is desired, e.g., for cryogenic microwave spectroscopy. A common complication of such experiments is the presence of undesired “spurious” additional resonances, which are due to standing waves within the resonator substrate or housing box. Identifying the nature of individual resonances (“designed” vs “spurious”) can become challenging for higher frequencies or if elements with unknown material properties are included, as is common for microwave spectroscopy. Here, we discuss various experimental strategies to distinguish designed and spurious modes in coplanar superconducting resonators that are operated in a broad frequency range up to 20 GHz. These strategies include tracking resonance evolution as a function of temperature, magnetic field, and microwave power. We also demonstrate that local modification of the resonator, by applying minute amounts of dielectric or electron spin resonance-active materials, leads to characteristic signatures in the various resonance modes, depending on the local strength of the electric or magnetic microwave fields.

arXiv:2303.15914•AIP Advances•Oct 1, 2023•3 citations
We performed transmission spectroscopy experiments on coplanar half-wavelength niobium resonators at temperature T=4.2T=4.2\phantom{\rule{0.16em}{0ex}}T=4.2K. We observe not only a strong dependence of the quality factor QQQ and the resonance frequency fres{f}_{\mathrm{res}}fres​ on an externally applied magnetic field but also on the magnetic history of our resonators, i.e., on the spatial distribution of trapped Abrikosov vortices in the device. This is valid for a broad range of frequencies and angles between the resonator plane and the magnetic field direction and holds for resonators with and without antidots near the edges of the center conductor and the ground planes. In a detailed analysis, we show that characteristic features of the experimental data can only be reproduced by calculations if we assume a highly inhomogeneous rf current density and a flux density gradient with maxima at the edges of the superconductor. We furthermore demonstrate that the hysteretic behavior of the resonator properties can be used to considerably reduce the vortex-induced losses and to fine-tune the resonance frequency by the proper way of cycling to a desired magnetic field value.
The operation of superconducting coplanar waveguide cavities, as used for circuit quantum electrodynamics and kinetic inductance detectors, in perpendicular magnetic fields normally leads to a reduction of the device performance due to energy dissipating Abrikosov vortices. We experimentally investigate the vortex induced energy losses in such Nb resonators with different spatial distributions of micropatterned pinning sites (antidots) by transmission spectroscopy measurements at 4.2 K. In comparison to resonators without antidots we find a significant reduction of vortex induced losses and thus increased quality factors over a broad range of frequencies and applied powers in moderate fields.
We demonstrate the microwave signatures of individual Abrikosov-vortex penetration events in superconducting microwave resonators. λ/4λ/4λ/4 resonators with a narrowed region near the grounded end acting as a vortex trap were fabricated and studied using microwave transmission spectroscopy at millikelvin temperatures. Sharp stepwise drops in resonance frequency are detected as a function of increasing external magnetic field, attributed to the entry of individual Abrikosov vortices in the narrow region. This interpretation is confirmed by NV center magnetometry revealing discrete vortex entry events on increasing field and the absence of such drops in a device with a wider narrowed region. Our results establish a method to investigate and manipulate the states of Abrikosov vortices with microwaves access and readout vortex configurations using magnetic-field sweeps and microwave drive.
Abstract We fabricated a superconducting coplanar waveguide resonator with leads for dc bias, which enables an ac conductivity measurement under dc bias. The current and magnetic field dependences of resonance properties were measured, and hysteretic behavior was observed as a function of the dc driving current. The observed shifts in the inverse of the quality factor, Q −1 , and the center frequency, f 0 , were explained by considering both motion of vortices and suppression of the order parameter by the dc current. Our investigation revealed that the strongly pinned vortices have a small influence on f 0 , while they still affect Q −1 . Our results indicate that the accurate understanding of the dynamics of driven vortices is indispensable for a control of the resonance properties with a high precision.
Superconducting coplanar waveguide resonators that can operate in strong magnetic fields are important for a variety of high-frequency superconducting devices. Magnetic fields degrade resonator performance by creating Abrikosov vortices that cause resistive losses and frequency fluctuations, or suppress the superconductivity entirely. To mitigate these effects, the authors investigate how device geometry and lithographically defined artificial defects can control vortex dynamics. These techniques allow the resonators to retain single-photon quality factors of about 105{}^{5}5 at ${B}_{\ensuremath{\parallel}}$ \ensuremath{\simeq} 6 T, for fast charge readout of a gate-defined double quantum dot at ${B}_{\ensuremath{\parallel}}$ = 1 T.
We investigate the magnetic hysteresis of a superconducting microstrip resonator with a high edge barrier. We measure the magnetic hysteresis while either sweeping a magnetic field or tuning the edge barrier by high microwave current. We show that the magnetic hysteresis of such a device is qualitatively different from that of one without an edge barrier and can be understood based on the generalized critical-state model. In particular, we propose and demonstrate a simple and intuitive method that relies on a plot of the quality factor versus the resonance frequency for revealing the physical processes behind those hysteretic behaviors. Based on this, we find that the interplay between the Meisser current and vortex pinning is essential for understanding the magnetic hysteresis of such a device.
Planar superconducting microwave transmission line resonators can be operated at multiple harmonic resonance frequencies. This allows covering wide spectral regimes with high sensitivity, as it is desired, e.g., for cryogenic microwave spectroscopy. A common complication of such experiments is the presence of undesired “spurious” additional resonances, which are due to standing waves within the resonator substrate or housing box. Identifying the nature of individual resonances (“designed” vs “spurious”) can become challenging for higher frequencies or if elements with unknown material properties are included, as is common for microwave spectroscopy. Here, we discuss various experimental strategies to distinguish designed and spurious modes in coplanar superconducting resonators that are operated in a broad frequency range up to 20 GHz. These strategies include tracking resonance evolution as a function of temperature, magnetic field, and microwave power. We also demonstrate that local modification of the resonator, by applying minute amounts of dielectric or electron spin resonance-active materials, leads to characteristic signatures in the various resonance modes, depending on the local strength of the electric or magnetic microwave fields.