The equilibrium state of a system consisting of a large number of strongly interacting electrons can be characterized by its density operator. This gives a direct access to the ground-state energy or, at finite temperatures, to the free energy of the system as well as to other static physical quantities. Elementary excitations of the system, on the other hand, are described within the language of Green's functions, i.e. time- or frequency-dependent dynamic quantities which give a direct access to the linear response of the system subjected to a weak time-dependent external perturbation. A typical example is angle-revolved photoemission spectroscopy which is linked to the single-electron Green's function. Since usually both, the static as well as the dynamic physical quantities, cannot be obtained exactly for lattice fermion models like the Hubbard model, one has to resort to approximations. Opposed to more ad hoc treatments, variational principles promise to provide consistent and controlled approximations. Here, the Ritz principle and a generalized version of the Ritz principle at finite temperatures for the static case on the one hand and a dynamical variational principle for the single-electron Green's function or the self-energy on the other hand are introduced, discussed in detail and compared to each other to show up conceptual similarities and differences. In particular, the construction recipe for non-perturbative dynamic approximations is taken over from the construction of static mean-field theory based on the generalized Ritz principle. Within the two different frameworks, it is shown which types of approximations are accessible, and their respective weaknesses and strengths are worked out. Static Hartree-Fock theory as well as dynamical mean-field theory are found as the prototypical approximations.
The equilibrium state of a system consisting of a large number of strongly interacting electrons can be characterized by its density operator. This gives a direct access to the ground-state energy or, at finite temperatures, to the free energy of the system as well as to other static physical quantities. Elementary excitations of the system, on the other hand, are described within the language of Green's functions, i.e. time- or frequency-dependent dynamic quantities which give a direct access to the linear response of the system subjected to a weak time-dependent external perturbation. A typical example is angle-revolved photoemission spectroscopy which is linked to the single-electron Green's function. Since usually both, the static as well as the dynamic physical quantities, cannot be obtained exactly for lattice fermion models like the Hubbard model, one has to resort to approximations. Opposed to more ad hoc treatments, variational principles promise to provide consistent and controlled approximations. Here, the Ritz principle and a generalized version of the Ritz principle at finite temperatures for the static case on the one hand and a dynamical variational principle for the single-electron Green's function or the self-energy on the other hand are introduced, discussed in detail and compared to each other to show up conceptual similarities and differences. In particular, the construction recipe for non-perturbative dynamic approximations is taken over from the construction of static mean-field theory based on the generalized Ritz principle. Within the two different frameworks, it is shown which types of approximations are accessible, and their respective weaknesses and strengths are worked out. Static Hartree-Fock theory as well as dynamical mean-field theory are found as the prototypical approximations.
To avoid confusion, it is necessary to be quite explicit about what is assumed and what is to be proved. A. Klein, Phys. Rev. 121, 950 (1961) Summary The topic of this chapter is functionals that provide a concise formulation for thermodynamic quantities and Green's function methods in interacting many-body systems. Building upon the instructive examples of density functional theory and the Hartree– Fock approximation, functionals of the Green's function are developed to provide a framework for practical methods used extensively in many-body perturbation theory (Chs. 9–15), dynamical mean-field theory (Chs. 16–20), and their combination in Ch. 21. Functional concepts give a firm foundation for those methods, for example, they give the conditions for approximations to obey conservation laws. Additional background and specific aspects are in App. H. Many physical quantities can be expressed as functionals , i.e., they depend on an entire function.1 For example, in the quantum variational method to determine a wavefunction, the total energy of a system of many electrons is a functional of a many-body trial wavefunction ( r 1 , r 2 , …): it is the expectation value of the hamiltonian. At the variational minimum, assuming the trial wavefunction is completely flexible, one finds the many-body Schrödinger equation for the ground state. Many of the properties we are interested in are, formally, simple functionals of the ground- or excited-state wavefunctions. In the search for feasible ways to calculate properties such as excitation spectra, we are led to different types of functional. The idea is to deal only with a physical, measurable quantity Q of interest and a variational functional E [ Q ] of this quantity. The variational character of E allows one to derive equations that determine Q 0 , the value of Q for the system in a desired state, typically the ground state or equilibrium state at T ≠ 0. Other properties should be different functionals F m [ Q ] that can then be evaluated at Q = Q 0 . This strategy is outlined in Fig. 8.1. To appreciate the power of such approaches, one can consider the impact of density functional theory, which is formulated as a functional of the density n ( r ) of electrons; it is defined for a range of densities and the variational minimum for the energy functional E [ n ] leads to equations to determine the actual ground-state density n 0 ( r ) and total energy E 0 .
For weakly interacting many-body quantum systems one can apply the extensive framework of perturbative quantum field theory. On the other hand, strong interactions can not be treated practically in perturbation theory because of the absence of a small control parameter. In this context variational methods are a powerful tool to obtain reliable informations regarding the properties of the ground state of the strongly correlated electron system. In this thesis we present novel formulations of two widely used methods: the Gutzwiller wave function and the slave-spin theory. These techniques share a similar philosophy and the extensions are based on the common attitude towards a more detailed description of the high-energy incoherent excitations characterizing interacting electron systems together with low-energy quasiparticles excitations, captured by standard approaches. Our task is not only crucial for a faithful description of the insulating phase but also improves the variational characterization of the low-energy quasiparticle excitations. We apply the novel ghost-Gutzwiller wave function technique to tackle an intriguing phenomenon, namely the exciton Mott transition in photoexcited semiconductors. Despite being a quite old topic that goes back to the 1970's, the nature of the exciton Mott transition still defies a complete understanding. By considering an idealised model of photoexcited semiconductors we unveil the important role of the exciton binding energy in determining the nature of the transition. Moreover, our results uncover rather anomalous electron-hole liquid phase next to the transition, which still sustains excitonic excitations although being a degenerate Fermi liquid of heavy mass quasiparticles. By means of the Dirac-Frenkel variational principle, we generalize the ghost-Gutzwiller wave function to study the out of equilibrium dynamics of strongly correlated electron systems. Numerical results on the single-band Hubbard model show a remarkable agreement with those obtained with time-dependent dynamical mean field theory. We believe that the method opens the way to several promising developments and future applications. Concerning the slave-particle approach, we consider Anderson impurity models and we show that, within our formulation, the constraint on the slave-spin variable can be removed, leaving thermal average free by any projection on the "physical" subspace of the enlarged Hilbert space. To the best of our knowledge, this represents an exception and shows that our formulation is more convenient than other slave-particle approaches, where the constraint have to be implemented explicitly. The method, suited to deal with impurity models, finds direct application in studying time-dependent transport across an interacting quantum dot. To this aim we formulate, by means of the Keldysh Green's function, the slave-spin mean-field theory in the out of equilibrium framework and we apply the method to the dynamics of a driven quantum dot. Finally we study the current-voltage characteristic of an interacting quantum dot tunnel-coupled to the edge of a superconductive nanowire. The appearance of the topological Majorana edge mode is signalized by distinctive features in the charge transport properties of the junction. Apart from the well known half-integer zero bias conductance we find that the topological region is characterized by a vanishing Fano factor, that can be measured in experiments to detect the presence of a Majorana zero mode hybridized with the quantum dot.
The self-energy functional theory (SFT) is generalized to describe the real-time dynamics of correlated lattice-fermion models far from thermal equilibrium. This is achieved by starting from a reformulation of the original equilibrium theory in terms of double-time Green's functions on the Keldysh-Matsubara contour. With the help of a generalized Luttinger-Ward functional, we construct a functional $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{\ensuremath{\Omega}}[\ensuremath{\Sigma}]$ which is stationary at the physical (nonequilibrium) self-energy $\ensuremath{\Sigma}$ and which yields the grand potential of the initial thermal state $\ensuremath{\Omega}$ at the physical point. Nonperturbative approximations can be defined by specifying a reference system that serves to generate trial self-energies. These self-energies are varied by varying the reference system's one-particle parameters on the Keldysh-Matsubara contour. In the case of thermal equilibrium, this approach reduces to the conventional SFT. Contrary to the equilibrium theory, however, ``unphysical'' variations, i.e., variations that are different on the upper and the lower branches of the Keldysh contour, must be considered to fix the time dependence of the optimal physical parameters via the variational principle. Functional derivatives in the nonequilibrium SFT Euler equation are carried out analytically to derive conditional equations for the variational parameters that are accessible to a numerical evaluation via a time-propagation scheme. Approximations constructed by means of the nonequilibrium SFT are shown to be inherently causal, internally consistent, and to respect macroscopic conservation laws resulting from gauge symmetries of the Hamiltonian. This comprises the nonequilibrium dynamical mean-field theory but also dynamical-impurity and variational-cluster approximations that are specified by reference systems with a finite number of degrees of freedom. In this way, nonperturbative and consistent approximations can be set up, the numerical evaluation of which is accessible to an exact-diagonalization approach.
A review of electronic dynamics of single-impurity and many-impurity Anderson models is contained in this report. Those models are used widely for many of the applications in diverse fields of interest, such as surface physics, theory of chemisorption and adsorbate reactions on metal surfaces, physics of intermediate valence systems, theory of heavy fermions, physics of quantum dots and other nanostructures. While standard treatments are generally based on perturbation methods, our approach is based on the non-perturbative technique for the thermodynamic Green functions. The method of the irreducible Green functions is used as the basic tool. This irreducible Green functions method allows one to describe the quasiparticle spectra with damping of the strongly correlated electron systems in a very general and natural way and to construct the relevant dynamical solution in a self-consistent way on the level of Dyson equation without decoupling the chain of the equations of motion for the Green functions. The subject matter includes the improved interpolating solution of the Anderson model. It was shown that an interpolating approximation, which simultaneously reproduces the weak-coupling limit up to second order in the interaction strength U and the strong-coupling limit up to second order in the hybridization V (and thus also fulfils the atomic limit) can be formulated self-consistently. This approach offers a new way for the systematic construction of approximate interpolation dynamical solutions of strongly correlated electron systems.
Think globally, act locally. Summary Dynamical mean-field theory is designed to treat systems with local effective interactions that are strong compared with the independent-particle terms that lead to delocalized band-like states. Interactions are taken into account by a many-body calculation for an auxiliary system, a site embedded in a dynamical mean field, that is chosen to best represent the coupling to the rest of the crystal. The methods are constructed to be exact in three limits: interacting electrons on isolated sites, a lattice with no interactions, and the limit of infinite dimensions d → ∞ where mean-field theory is exact. This chapter is devoted to the general formulation, the single-site approximation where the calculation of the self-energy is mapped onto a self-consistent quantum impurity problem, and instructive examples for the Hubbard model on a d → ∞ Bethe lattice. Further developments and applications are the topics of Chs. 17–21. One of the most rewarding features of condensed matter theory is the ability to address difficult problems from different points of view. The preceding Chs. 9–15 present an approach based on perturbation expansions in the Coulomb interaction. In particular, the GW approximation for the self-energy has proven to be extremely successful in describing electronic spectra of many materials, as described in Ch. 13. The methods can be applied to the ordered states of materials with d and f states, for example, ferromagnetic Ni and anti-ferromagnetic NiO, as described in Secs. 13.4 and 20.7. However, the GW and related approximations have difficulties in treating cases with degenerate or nearly degenerate states and low-energy excitations. Present-day methods do not describe phenomena like the fluctuations of local moments in a ferromagnetic material above the Curie temperature or the insulating character of NiO in the paramagnetic phase; more generally, they have difficulty describing strong correlation. The topic of this chapter and Chs. 17–21 is dynamical mean-field theory, which is also a Green's function method in which the key quantity is the self-energy. However, it is designed to treat strong interactions for electrons in localized atomic-like states, such as the d and f states in transition metals, lanthanide and actinide elements and compounds.
The problem of quantum dynamics in open systems has gained attention in recent decades and not the least due to the advances made in quantum transport in molecular systems. The main motivation behind quantum transport and molecular electronics is the futuristic goal to be able at some point to replace, or to complement, the silicon-based technology and to make the electronic devices faster. On a fundamental level, one has to deal with time-dependent processes where electron-electron or electron- phonon interactions are of great importance, and they can cause profound quantitative and qualitative changes on the physical and dynamical properties of electronic systems compared to the non-interacting case. Most of the studies of quantum transport have been focused on the steady-state description while neglecting the short-time dynamics. However, the dynamical effects are of great importance since fast- switching processes play a pivotal role in the operation of future devices. We studied the problem of time-dependent electron transport through the Anderson impurity model by using many-body perturbation theory (MBPT) together with Keldysh Green’s functions as well as with time-dependent density functional theory (TDDFT). These methods were compared with numerically exact time-dependent density-matrix renormalization group (tDMRG) method. We found that the many-body perturbation theory results beyond Hartree-Fock approximation were in close agreement with tDMRG results. In addition we studied the possibility of multistablity in the density and current of an interacting nanoscale junction as well as how to reversibly switch between the multiple solutions in time domain. An accurate theoretical treatment of electron correlation even in as simple model as an interacting electron gas at metallic densities still continues to be a challenge; especially description of features in the photoemission spectra due to electron correlations provides a theoretical challenge. The many-body perturbation theory yields a systematic way to study electron-electron (electron-phonon) correlations in various systems. One of the widely used approximations in MBPT is the GW approximation in which the bare interaction line is replaced with screened interaction line in the first order exchange diagram. The GW approximation gives good estimates for the band gap values close to experimental ones but especially the self-consistent GW approximation has a number of deficiencies like washing out of plasmon features and overestimation of bandwidths compared to experiment. One way to improve GW calculations is to include vertex corrections. Unfortunately, the straightforward inclusion of vertex corrections yields negative spectra in some frequency regions. We developed a diagrammatic approach to construct self-energy approximations with positive spectral properties. Our approach consists of expressing a self-energy of response diagram as a product of half-diagrams after which a minimal set of additional diagrams is identified to construct a perfect square. We applied this method to study vertex corrections in a homogeneous electron gas. In addition we analyzed the diagrammatic content of photocurrent with density functional theory. The expression for the photocurrent was obtained as an integral over the Kohn-Sham spectral function renormalized by effective potentials that depend on the exchange correlation kernel of current density functional theory. The expression for the photocurrent gives us the angular dependence of the photocurrent but it does not provide a direct access to the kinetic energy distribution of the photoelectrons.