Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1201.2584 · Applied Physics Letters

Large two dimensional Coulomb crystals in a radio frequency surface ion trap

B. Szymanski, Romain Dubessy, B. Dubost, S. Guibal, J.-P. Likforman, Luca Guidoni

Published Apr 23, 2012• 39 citations
arXivHTMLPDF

Abstract

We designed and operated a surface ion trap with an ion-substrate distance of 500 μm, realized with standard printed-circuit-board techniques. The trap has been loaded with up to a few thousand Sr+ ions in the Coulomb-crystal regime. An analytical model of the pseudo-potential allowed us to determine the parameters that drive the trap into anisotropic regimes in which we obtain large (N>150) purely two dimensional (2D) ion Coulomb crystals. These crystals may open a simple and reliable way to experiments on quantum simulations of large 2D systems.

DOI
10.1063/1.4705153

Related papers

Controlling Two-Dimensional Coulomb Crystals of More Than 100 Ions in a Monolithic Radio-Frequency Trap

Dominik Kiesenhofer, Helene Hainzer, Artem Zhdanov +4 more

Linear strings of trapped atomic ions held in radio-frequency (rf) traps constitute one of the leading platforms for quantum simulation experiments, allowing the investigation of interacting quantum matter.However, linear ion strings have drawbacks, such as the difficulty of scaling beyond approximately 50 particles as well as the inability to naturally implement spin models with more than one spatial dimension.Here we present experiments with planar Coulomb crystals of up to 105 40 Ca + ions in a novel monolithic rf trap, laying the groundwork for quantum simulations of two-dimensional spin models with singleparticle control.We characterize the trapping potential by analysis of crystal images and compare the observed crystal configurations with numerical simulations.We further demonstrate stable confinement of large crystals, free of structural configuration changes, and find that rf heating of the crystal is not an obstacle for future quantum simulation experiments.Finally, we prepare the out-of-plane motional modes of planar crystals consisting of up to 105 ions close to their ground state by electromagnetically induced transparency cooling, an important prerequisite for implementing long-range entangling interactions.

arXiv:2302.00565•PRX Quantum•Apr 28, 2023•53 citations

Two-dimensional ion crystals in radio-frequency traps for quantum simulation

Philip Richerme

The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.

arXiv:1604.08523•Physical Review A•Sep 20, 2016•44 citations

Microfabricated Paul traps for levitating and shuttling of ions and charged particles

Hwanjit Rattanasonti

Trapped ions in Paul traps (radio frequency ion traps) are a promising candidate for the realization of a quantum computer. To date, experimental demonstrations of quantum computing and information processing with trapped ions have been limited to small numbers of quantum bits (qubits). The most prominent challenge to realise ion-trap quantum computation is to scale the system and control a large number of trapped ions coherently. Surface-electrode ion trap designs which are amenable to various microfabrication techniques offer a path to achieve this. In this work, design, fabrication and key operations of two types of surface-electrode ion traps, i.e. a Y-junction trap and a two-dimensional (2D) hexagonal lattice trap developed towards scaling ion-trap architectures, are presented. The steps involved in the fabrication of the ion-trap devices included photolithography, wet etch (hydrofluoric acid etch) and dry etch (deep reactive ion and inductively coupled plasma etching), and metal evaporation. The devices were fabricated on SOI substrates with different buried oxide thicknesses (i.e. 5 µm and 10 µm) and different metals for the trap electrodes (i.e. gold and aluminium). An extremely high-breakdown voltage up to 1 kV was measured in vacuum for the SOI-built test devices with a 10 µm-thick buried oxide formed by oxide film-to-oxide film bonding process. This is attributed to the deep V-shaped undercut profile of the buried oxide layer which resulted in a large breakdown path length, and so mitigating surface breakdown effects. Owing to the V-shaped undercut profile, the surface breakdown voltage was improved by 15% for the devices fabricated on SOI substrates with a 10 µm-thick buried oxide. In the first experiment, the demonstration of ytterbium (174Yb+) ion trapping in the 2D hexagonal lattice trap is achieved with a relatively long lifetime of a laser-cooled ion up to 90 minutes and ≤ 5 minutes without cooling in ultra-high vacuum system. The 2D lattice trap design allows for reliable trapping of 2D ion lattices, rudimentary shuttling between lattice sites and deterministic introducing of defects into the ion lattice. Based on all these abilities, such a 2D lattice trap with the predicted reduction of lattice spacing down to 32 µm can be configured as a versatile architecture for 2D quantum simulations with trapped ions. In the second experiment, microparticle trapping in the 2D lattice trap, performed in air, is achieved with the longest trapping lifetime of 60 minutes. Both gold and aluminium-coated electrodes also lead to comparable trapping performances. Furthermore, the in situ levitation of microparticles is successfully demonstrated at the maximum levitation height of 30 µm. This ability provides additional control on the trapping height which increases the overall functionality of the 2D lattice trap.

•Jan 1, 2015•0 citations

Two-dimensional arrays of radio-frequency ion traps with addressable interactions

Muir Kumph, Michael Brownnutt, R. Blatt

We describe the advantages of two-dimensional (2D), addressable arrays of spherical Paul traps. They would provide the ability to address and tailor the interaction strengths of trapped objects in 2D and could be a valuable new tool for quantum information processing. Simulations of trapping ions are compared to first tests utilizing printed circuit board trap arrays loaded with dust particles. Pair-wise interactions in the array are addressed by means of an adjustable radio-frequency (RF) electrode shared between trapping sites. By attenuating this RF electrode potential, neighboring pairs of trapped objects have their interaction strength increased and are moved closer to one another. In the limit of the adjustable electrode being held at RF ground, the two formerly spherical traps are merged into one linear Paul trap.

arXiv:1103.5428•New Journal of Physics•Jul 29, 2011•64 citations

Radial Two-Dimensional Ion Crystals in a Linear Paul Trap

Marissa D’Onofrio, Yuanheng Xie, A. J. Rasmusson +3 more

We experimentally study two-dimensional (2D) Coulomb crystals in the "radial-2D" phase of a linear Paul trap. This phase is identified by a 2D ion lattice aligned entirely with the radial plane and is created by imposing a large ratio of axial to radial trapping potentials. Using arrays of up to 19 ^{171}Yb^{+} ions, we demonstrate that the structural phase boundaries of such crystals are well described by the pseudopotential approximation, despite the time-dependent ion positions driven by intrinsic micromotion. We further observe that micromotion-induced heating of the radial-2D crystal is confined to the radial plane. Finally, we verify that the transverse motional modes, which are used in most ion-trap quantum simulation schemes, are well-predictable numerically and remain decoupled and cold in this geometry. Our results establish radial-2D ion crystals as a robust experimental platform for realizing a variety of theoretical proposals in quantum simulation and computation.

arXiv:2012.12766•Physical Review Letters•Jul 9, 2021•40 citations

Designing an ion trap for quantum simulation

I. M. Buluta, Shuichi Hasegawa

Planar Coulomb crystals have been recently proposed for the implementation of quantum simulation and computation. In order to put this idea into practice we designed a specialized RF ion trap system. The design is based on extensive numerical simulations of planar Coulomb crystals in RF traps and the estimation of the error in quantum simulation and computation. Our trap would have reduced heating rates and large axial confinement frequencies would be available. Moreover, it provides very good optical access and it is easy to construct and operate.

Quantum Information and Computation•May 1, 2009•2 citations
We designed and operated a surface ion trap with an ion-substrate distance of 500 μm, realized with standard printed-circuit-board techniques. The trap has been loaded with up to a few thousand Sr+ ions in the Coulomb-crystal regime. An analytical model of the pseudo-potential allowed us to determine the parameters that drive the trap into anisotropic regimes in which we obtain large (N>150) purely two dimensional (2D) ion Coulomb crystals. These crystals may open a simple and reliable way to experiments on quantum simulations of large 2D systems.
Linear strings of trapped atomic ions held in radio-frequency (rf) traps constitute one of the leading platforms for quantum simulation experiments, allowing the investigation of interacting quantum matter.However, linear ion strings have drawbacks, such as the difficulty of scaling beyond approximately 50 particles as well as the inability to naturally implement spin models with more than one spatial dimension.Here we present experiments with planar Coulomb crystals of up to 105 40 Ca + ions in a novel monolithic rf trap, laying the groundwork for quantum simulations of two-dimensional spin models with singleparticle control.We characterize the trapping potential by analysis of crystal images and compare the observed crystal configurations with numerical simulations.We further demonstrate stable confinement of large crystals, free of structural configuration changes, and find that rf heating of the crystal is not an obstacle for future quantum simulation experiments.Finally, we prepare the out-of-plane motional modes of planar crystals consisting of up to 105 ions close to their ground state by electromagnetically induced transparency cooling, an important prerequisite for implementing long-range entangling interactions.
The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.
Trapped ions in Paul traps (radio frequency ion traps) are a promising candidate for the realization of a quantum computer. To date, experimental demonstrations of quantum computing and information processing with trapped ions have been limited to small numbers of quantum bits (qubits). The most prominent challenge to realise ion-trap quantum computation is to scale the system and control a large number of trapped ions coherently. Surface-electrode ion trap designs which are amenable to various microfabrication techniques offer a path to achieve this. In this work, design, fabrication and key operations of two types of surface-electrode ion traps, i.e. a Y-junction trap and a two-dimensional (2D) hexagonal lattice trap developed towards scaling ion-trap architectures, are presented. The steps involved in the fabrication of the ion-trap devices included photolithography, wet etch (hydrofluoric acid etch) and dry etch (deep reactive ion and inductively coupled plasma etching), and metal evaporation. The devices were fabricated on SOI substrates with different buried oxide thicknesses (i.e. 5 µm and 10 µm) and different metals for the trap electrodes (i.e. gold and aluminium). An extremely high-breakdown voltage up to 1 kV was measured in vacuum for the SOI-built test devices with a 10 µm-thick buried oxide formed by oxide film-to-oxide film bonding process. This is attributed to the deep V-shaped undercut profile of the buried oxide layer which resulted in a large breakdown path length, and so mitigating surface breakdown effects. Owing to the V-shaped undercut profile, the surface breakdown voltage was improved by 15% for the devices fabricated on SOI substrates with a 10 µm-thick buried oxide. In the first experiment, the demonstration of ytterbium (174Yb+) ion trapping in the 2D hexagonal lattice trap is achieved with a relatively long lifetime of a laser-cooled ion up to 90 minutes and ≤ 5 minutes without cooling in ultra-high vacuum system. The 2D lattice trap design allows for reliable trapping of 2D ion lattices, rudimentary shuttling between lattice sites and deterministic introducing of defects into the ion lattice. Based on all these abilities, such a 2D lattice trap with the predicted reduction of lattice spacing down to 32 µm can be configured as a versatile architecture for 2D quantum simulations with trapped ions. In the second experiment, microparticle trapping in the 2D lattice trap, performed in air, is achieved with the longest trapping lifetime of 60 minutes. Both gold and aluminium-coated electrodes also lead to comparable trapping performances. Furthermore, the in situ levitation of microparticles is successfully demonstrated at the maximum levitation height of 30 µm. This ability provides additional control on the trapping height which increases the overall functionality of the 2D lattice trap.
We describe the advantages of two-dimensional (2D), addressable arrays of spherical Paul traps. They would provide the ability to address and tailor the interaction strengths of trapped objects in 2D and could be a valuable new tool for quantum information processing. Simulations of trapping ions are compared to first tests utilizing printed circuit board trap arrays loaded with dust particles. Pair-wise interactions in the array are addressed by means of an adjustable radio-frequency (RF) electrode shared between trapping sites. By attenuating this RF electrode potential, neighboring pairs of trapped objects have their interaction strength increased and are moved closer to one another. In the limit of the adjustable electrode being held at RF ground, the two formerly spherical traps are merged into one linear Paul trap.
We experimentally study two-dimensional (2D) Coulomb crystals in the "radial-2D" phase of a linear Paul trap. This phase is identified by a 2D ion lattice aligned entirely with the radial plane and is created by imposing a large ratio of axial to radial trapping potentials. Using arrays of up to 19 ^{171}Yb^{+} ions, we demonstrate that the structural phase boundaries of such crystals are well described by the pseudopotential approximation, despite the time-dependent ion positions driven by intrinsic micromotion. We further observe that micromotion-induced heating of the radial-2D crystal is confined to the radial plane. Finally, we verify that the transverse motional modes, which are used in most ion-trap quantum simulation schemes, are well-predictable numerically and remain decoupled and cold in this geometry. Our results establish radial-2D ion crystals as a robust experimental platform for realizing a variety of theoretical proposals in quantum simulation and computation.
Planar Coulomb crystals have been recently proposed for the implementation of quantum simulation and computation. In order to put this idea into practice we designed a specialized RF ion trap system. The design is based on extensive numerical simulations of planar Coulomb crystals in RF traps and the estimation of the error in quantum simulation and computation. Our trap would have reduced heating rates and large axial confinement frequencies would be available. Moreover, it provides very good optical access and it is easy to construct and operate.