We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.
We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.
We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.
We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with -3 dB frequency above 5 GHz, and 4 microwave feed lines that allow low loss (less than 3 dB) transmission 10 GHz. The incorporation of a radio-frequency interposer enables the platform to be separated into two printed circuit boards, decoupling the simple board that is bonded to the qubit chip from the multilayer board that incorporates expensive connectors and components. This modular approach lifts the burden of duplicating complex interconnect circuits for every prototype device. We report the performance of this platform at milli-Kelvin temperatures, including signal transmission and crosstalk measurements.
Semiconductor quantum dot spin qubits, which employ radio frequency (RF) techniques for manipulation and readout, present a compelling pathway toward scalable quantum computation. We introduce a robust, miniaturized, and modular RF package designed for high-fidelity, low-crosstalk control of quantum dot qubit systems. This design integrates a master board with an interchangeable daughterboard for rapid sample exchange. Its compact footprint (28 × 50 × 12 mm3) is compatible with standard dilution refrigerator stages. The module provides 48 low-pass-filtered DC bias lines, 28 of which support combined RF/DC operation for qubit control. Dedicated RF lines include eight microwave channels with a DC to 6 GHz bandwidth and 20 DC pulse gate lines with a −3 dB cutoff at 3 GHz. A significant feature of this design is the suppression of crosstalk between adjacent microwave lines to <−30 dB (or less than 0.1% signal leakage) from DC to 6 GHz. This is achieved using optimized alternating ground planes and fencing vias. The module directly supports baseband control strategies, thereby mitigating gigahertz-frequency heating effects in high-density qubit arrays.
Large-scale cryogenic quantum systems are constrained by an input-output bottleneck between room-temperature electronics and millikelvin stages, particularly in superconducting qubit platforms. This bottleneck is most acute for output lines, where bulky and expensive microwave components limit scalability. A promising approach for scalable characterization and testing is to perform signal multiplexing directly at the qubit plane. We demonstrate a cryogenic CMOS (cryoCMOS) RF multiplexer operating at 10 millikelvin with record-low static power consumption of 200 pW. The device provides < 2 dB insertion loss and > 30 dB isolation across DC-8 GHz. Direct connection to transmon qubits marginally affects coherence times in the range of 100 microseconds, enabling multiplexing of readout, flux and, in principle, XY drive lines. This work introduces cryoCMOS multiplexers as valuable tools for scalable, high-throughput cryogenic characterization and testing, and advances co-integrated quantum-classical control for future large-scale quantum processors.
Quantum computing holds the promise to solve problems that are currently intractable by classical computing platforms. Such computing framework relies on the properties of quantum bits (qubits) that operates at cryogenic temperatures well below 1K. Besides a quantum processor, an operational quantum computer needs a classical electronic controller reading out the electrical signals generated by the qubits and the providing electrical control to perform the required operations on the qubits. Since today’s quantum processors comprise a low number of qubits (<10), most controlling electronics can operate at room temperature and be connected by bulky interconnects to the cryogenic qubit chamber. However, when scaling up to the thousands of qubits required in a practical quantum algorithm, the classical electronics must be placed at cryogenic temperature to simplify the interconnects and allow a compact, reliable and scalable system. In this work, we propose the fully-integrated implementation in standard CMOS technology of the electronic read-out for spin qubits. Simulations show that the proposed current read-out circuit can achieve a 10MHz bandwidth that is 10X wider than current state-of-the-art read-outs while keeping comparable noise performance and operating at 4.2K. Such results are a promising indication that cryogenic CMOS circuits can provide the building blocks for the integration of the classical electronic controller for future scalable quantum computers.
Superconducting qubits are pivotal in advancing quantum computing, poised for scale but limited by the complexity and fidelity of their control and readout systems, relying on RF and signal processing infrastructure. This survey serves as a comprehensive and technically grounded review of control and readout architectures tailored for superconducting qubits. Synthesizing insights from device physics, circuit design, microwave engineering, signal processing, and cryogenic integration, this work details the practicalities of RF pulse generation, signal synthesis, and readout signal analysis for quantum systems. it covers key requirements, parameters, and pulse engineering techniques, including commonly used envelopes like Gaussian and DRAG designs. Moving to the system level, this survey systematically classifies and critically analyses current architectural strategies (covering key areas like frequency conversion, waveform management, and system infrastructure) and technology platforms (including adaptive classical control stacks, cryogenic CMOS circuits, and novel interconnects and interfaces), evaluating their trade-offs in performance. Extensive literature analysis identifies prevailing limitations such as wiring complexity, thermal budget constraints, latency, and power consumption, while highlighting underexplored opportunities for on-chip signal processing and novel interconnects, drawing analogies to advanced communication systems design. By consolidating diverse control paradigms and critically evaluating their trade-offs, this survey provides a unified foundation for designing next-generation quantum control stacks. Finally, a forward-looking roadmap outlines key trends in monolithic integration, cryo-compatible digital architectures, and physics-informed hardware co-design, offering both a retrospective synthesis and a prospective vision for quantum hardware engineering beyond the NISQ era.