Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1012.5175 · Review of Scientific Instruments

Efficient radio frequency filters for space constrained cryogenic setups

Soumen Mandal, Tobias Bautze, Rémi Blinder, Tristan Meunier, Laurent Saminadayar, Christopher Bäuerle

Published Feb 1, 2011• 10 citations
arXivHTMLPDF

Abstract

Noise filtering is an essential part for measurement of quantum phenomena at extremely low temperatures. Here, we present the design of a filter which can be installed in space constrained cryogenic environment containing a large number of signal carrying lines. Our filters have a -3 db point of 65 kHz and their performance at GHz frequencies is comparable to the best available RF filters.

DOI
10.1063/1.3543736

Related papers

A Twisted Pair Cryogenic Filter

Lafe Spietz, John D. Teufel, R. J. Schoelkopf

In low temperature transport measurements, there is frequently a need to protect a device at cryogenic temperatures from thermal noise originating in warmer parts of the experiment. There are also a wide range of experiments, such as high precision transport measurements on low impedance devices, in which a twisted-pair wiring configuration is useful to eliminate magnetic pickup. Furthermore, with the rapid growth in complexity of cryogenic experiments, as in the field of quantum computing, there is a need for more filtered lines into a cryostat than are often available using the bulky low temperature filters in use today. We describe a low cost filter that provides the needed RF attenuation while allowing for tens of wires in a twisted pair configuration with an RF-tight connection to the sample holder. Our filter consists of manganin twisted pairs wrapped in copper tape with a light-tight connection to the shield of the sample holder. We demonstrate agreement of our filter with a theoretical model up to the noise floor of our measurement apparatus (90 dB). We describe operation of our filter in noise thermometry experiments down to 10 mK.

arXiv:cond-mat/0601316•Jan 15, 2006•7 citations

Narrow bandpass cryogenic filter for microwave measurements

Boris I. Ivanov, Dmitry Klimenko, A. N. Sultanov +2 more

An ultra-wide stopband hairpin bandpass filter with integrated nonuniform transmission lines was designed and fabricated for highly sensitive measurements at cryogenic temperatures down to millikelvin and a frequency range of 10 Hz-10 GHz. The scattering matrices of the filter were characterized at T = 4.2 K. The filter provides a stopband from 10 Hz to 2.2 GHz and from 2.3 GHz to 10 GHz with more than 50 dB and 40 dB of amplitude suppression, respectively. The center frequency of the passband is f0 = 2.25 GHz with a bandwidth Δf = 80 MHz. The maximum insertion loss in the passband is 4 dB. The filter has a 50 Ω input and output impedance, SubMiniature version A connector termination, and significantly reduced form factor. The wide stopband frequency range and narrow passband in conjunction with small dimensions make the filter suitable to use it as a part of a high sensitive readout for superconducting quantum circuits, such as superconducting quantum bits and cryogenic parametric amplifiers.

Review of Scientific Instruments•May 1, 2013•3 citations

Absorptive filters for quantum circuits: Efficient fabrication and cryogenic power handling

Alexandre Paquette, J. Griesmar, Gabriel Lavoie +5 more

We present an efficient fabrication method for absorptive microwave filters based on Eccosorb CR-124. Filters are fabricated from readily available parts, and their cutoff frequency can be set by their length. They exhibit desirable properties such as a very large and deep stop band with rejection beyond 120 dB at least up to 40 GHz, more than 10 dB return loss in both the pass and the stop band, and an error-function shaped step response without overshoot. Measurements at very low temperatures show that the filters thermalize on a time scale of approximately 100 s, and that they can absorb power as high as 100 nW with their noise temperature staying remarkably low, below 100 mK. These properties make the filters ideal for cryogenic filtering and filtering of intermediate frequency port signals of mixers.

arXiv:2202.11628•Applied Physics Letters•Sep 19, 2022•8 citations

Cryogenic High-Frequency Readout and Control Platform for Spin Qubits

James Colless, D. J. Reilly

We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.

arXiv:1111.6440•Nov 28, 2011•1 citation

Cryogenic high-frequency readout and control platform for spin qubits

James Colless, D. J. Reilly

We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.

Review of Scientific Instruments•Feb 1, 2012•22 citations

Modular cryogenic interconnects for multi-qubit devices

James Colless, D. J. Reilly

We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with -3 dB frequency above 5 GHz, and 4 microwave feed lines that allow low loss (less than 3 dB) transmission 10 GHz. The incorporation of a radio-frequency interposer enables the platform to be separated into two printed circuit boards, decoupling the simple board that is bonded to the qubit chip from the multilayer board that incorporates expensive connectors and components. This modular approach lifts the burden of duplicating complex interconnect circuits for every prototype device. We report the performance of this platform at milli-Kelvin temperatures, including signal transmission and crosstalk measurements.

arXiv:1405.3371•Review of Scientific Instruments•Nov 1, 2014•19 citations
Noise filtering is an essential part for measurement of quantum phenomena at extremely low temperatures. Here, we present the design of a filter which can be installed in space constrained cryogenic environment containing a large number of signal carrying lines. Our filters have a -3 db point of 65 kHz and their performance at GHz frequencies is comparable to the best available RF filters.
In low temperature transport measurements, there is frequently a need to protect a device at cryogenic temperatures from thermal noise originating in warmer parts of the experiment. There are also a wide range of experiments, such as high precision transport measurements on low impedance devices, in which a twisted-pair wiring configuration is useful to eliminate magnetic pickup. Furthermore, with the rapid growth in complexity of cryogenic experiments, as in the field of quantum computing, there is a need for more filtered lines into a cryostat than are often available using the bulky low temperature filters in use today. We describe a low cost filter that provides the needed RF attenuation while allowing for tens of wires in a twisted pair configuration with an RF-tight connection to the sample holder. Our filter consists of manganin twisted pairs wrapped in copper tape with a light-tight connection to the shield of the sample holder. We demonstrate agreement of our filter with a theoretical model up to the noise floor of our measurement apparatus (90 dB). We describe operation of our filter in noise thermometry experiments down to 10 mK.
An ultra-wide stopband hairpin bandpass filter with integrated nonuniform transmission lines was designed and fabricated for highly sensitive measurements at cryogenic temperatures down to millikelvin and a frequency range of 10 Hz-10 GHz. The scattering matrices of the filter were characterized at T = 4.2 K. The filter provides a stopband from 10 Hz to 2.2 GHz and from 2.3 GHz to 10 GHz with more than 50 dB and 40 dB of amplitude suppression, respectively. The center frequency of the passband is f0 = 2.25 GHz with a bandwidth Δf = 80 MHz. The maximum insertion loss in the passband is 4 dB. The filter has a 50 Ω input and output impedance, SubMiniature version A connector termination, and significantly reduced form factor. The wide stopband frequency range and narrow passband in conjunction with small dimensions make the filter suitable to use it as a part of a high sensitive readout for superconducting quantum circuits, such as superconducting quantum bits and cryogenic parametric amplifiers.
We present an efficient fabrication method for absorptive microwave filters based on Eccosorb CR-124. Filters are fabricated from readily available parts, and their cutoff frequency can be set by their length. They exhibit desirable properties such as a very large and deep stop band with rejection beyond 120 dB at least up to 40 GHz, more than 10 dB return loss in both the pass and the stop band, and an error-function shaped step response without overshoot. Measurements at very low temperatures show that the filters thermalize on a time scale of approximately 100 s, and that they can absorb power as high as 100 nW with their noise temperature staying remarkably low, below 100 mK. These properties make the filters ideal for cryogenic filtering and filtering of intermediate frequency port signals of mixers.
We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.
We have developed a cryogenic platform for the control and readout of spin qubits that comprises a high density of dc and radio frequency sample interconnects based on a set of coupled printed circuit boards. The modular setup incorporates 24 filtered dc lines, 14 control and readout lines with bandwidth from dc to above 6 GHz, and 2 microwave connections for excitation to 40 GHz. We report the performance of this platform, including signal integrity and crosstalk measurements and discuss design criteria for constructing sample interconnect technology needed for multi-qubit devices.
We have developed a modular interconnect platform for the control and readout of multiple solid-state qubits at cryogenic temperatures. The setup provides 74 filtered dc-bias connections, 32 control and readout connections with -3 dB frequency above 5 GHz, and 4 microwave feed lines that allow low loss (less than 3 dB) transmission 10 GHz. The incorporation of a radio-frequency interposer enables the platform to be separated into two printed circuit boards, decoupling the simple board that is bonded to the qubit chip from the multilayer board that incorporates expensive connectors and components. This modular approach lifts the burden of duplicating complex interconnect circuits for every prototype device. We report the performance of this platform at milli-Kelvin temperatures, including signal transmission and crosstalk measurements.