arXiv:1009.2916 · Nature Communications

Fast cavity-enhanced atom detection with low noise and high fidelity

J. Goldwin, Michael Trupke, Joanna Kenner, Adrian Ratnapala, E. A. Hinds

Published Aug 9, 2011• 20 citations

Abstract

Cavity quantum electrodynamics describes the fundamental interactions between light and matter, and how they can be controlled by shaping the local environment. For example, optical microcavities allow high-efficiency detection and manipulation of single atoms. In this regime, fluctuations of atom number are on the order of the mean number, which can lead to signal fluctuations in excess of the noise on the incident probe field. Here we demonstrate, however, that nonlinearities and multi-atom statistics can together serve to suppress the effects of atomic fluctuations when making local density measurements on clouds of cold atoms. We measure atom densities below 1 per cavity mode volume near the photon shot-noise limit. This is in direct contrast to previous experiments where fluctuations in atom number contribute significantly to the noise. Atom detection is shown to be fast and efficient, reaching fidelities in excess of 97% after 10 μs and 99.9% after 30 μs.

DOI: 10.1038/ncomms1428

Related papers

Cavity QED in a high NA resonator

Danial Shadmany, Aishwarya Kumar, Anna Soper +8 more

From fundamental studies of light-matter interaction to applications in quantum networking and sensing, cavity quantum electrodynamics (QED) provides a toolbox to control interactions between atoms and photons. The coherence of interactions is determined by the single-pass atomic absorption and number of photon round-trips. Reducing the cavity loss has enabled resonators supporting 1 million roundtrips but with limited material choices and increased alignment sensitivity. Here, we present a high–numerical aperture, lens-based resonator that pushes the single-atom single-photon absorption probability near its fundamental limit, reducing the mode size at the atom to order λ. This resonator provides a single-atom cooperativity of 1.6 in a cavity where the light circulates ∼10 times. We load single 87 Rb atoms into this cavity, observe strong coupling, and demonstrate cavity-enhanced atom detection with fidelity of 99.55(6)% and survival of 99.89(4)% in 130 μs. Introducing intracavity imaging systems will enable cavity arrays compatible with Rydberg atom array computing technologies, expanding the applicability of the cavity QED toolbox.

Science AdvancesFeb 26, 202519 citations

Atoms in microcavities : detection and spectroscopy

Joanna Kenner

This thesis presents work undertaken with cold rubidium atoms interacting with an optical microcavity. The optical microcavity used is unique in its design, being formed between an optical fibre and silicon micromirror. This allows direct optical access to the cavity mode, whilst the use of microfabrication techniques in the design means that elements of the system are inherently scalable. In addition, the parameters of the system are such that a single atom has a substantial impact on the cavity field. In this system, two types of signal arise from the atoms' interaction with the cavity field; a `reflection' signal and a `fluorescence' signal. A theoretical description for these signals is presented, followed by experiments which characterise the signals under a variety of experimental conditions. The thesis then explores two areas: the use of the microcavity signals for atom detection and the investigation of how higher atom numbers and, as a result, a larger cooperative interaction between the atoms and the cavity field, impacts the signals. First, the use of these signals to detect an effective single atom and individual atoms whilst falling and trapped is explored. The effectiveness of detection is parameterised in terms of detection confidence and signal to noise ratio, detection fidelity and dynamic range. In the second part of this thesis, the effect of higher atom numbers on the reflection and fluorescence signals is investigated. A method for increasing the atom number is presented, alongside experiments investigating the impact on the measured signals. This is followed by experiments which explore the dispersive nature of the atom-cavity interaction by measuring the excitation spectrum of the system in reflection and fluorescence. In doing so, it is shown that, for weak coupling, these two signals are manifestly different.

Mar 1, 20101 citation

Excess optical quantum noise in atomic sensors

Irina V. Novikova, Eugeniy E. Mikhailov, Yanhong Xiao

Enhanced nonlinear optical response of a coherent atomic medium is the basis for many atomic sensors, and their performance is ultimately limited by the quantum fluctuations of the optical readout. Here we demonstrate that the off-resonant interactions, with the aid of the near-resonant process, can significantly modify the quantum noise of a coherent light field, even when its effect on the mean signal is negligible. The altered quantum optical noise distribution results in excess noise in the measurement quantity. We illustrate this concept by using an atomic magnetometer based on the nonlinear Faraday effect. These results show the existence of previously unnoticed factors in fundamental limitations in atomic magnetometry and could have impact in a wide range of atom-light--based precision measurements.

arXiv:1410.3810Physical Review AMay 22, 201517 citations

Hybrid apparatus for Bose-Einstein condensation and cavity quantum electrodynamics: Single atom detection in quantum degenerate gases

Anton Öttl, Stephan Ritter, Michael Köhl +1 more

We present and characterize an experimental system in which we achieve the integration of an ultrahigh finesse optical cavity with a Bose-Einstein condensate (BEC). The conceptually novel design of the apparatus for the production of BECs features nested vacuum chambers and an in vacuo magnetic transport configuration. It grants large scale spatial access to the BEC for samples and probes via a modular and exchangeable “science platform.” We are able to produce Rb87 condensates of 5×106 atoms and to output couple continuous atom lasers. The cavity is mounted on the science platform on top of a vibration isolation system. The optical cavity works in the strong coupling regime of cavity quantum electrodynamics and serves as a quantum optical detector for single atoms. This system enables us to study atom optics on a single particle level and to further develop the field of quantum atom optics. We describe the technological modules and the operation of the combined BEC cavity apparatus. Its performance is characterized by single atom detection measurements for thermal and quantum degenerate atomic beams. The atom laser provides a fast and controllable supply of atoms coupling with the cavity mode and allows for an efficient study of atom field interactions in the strong coupling regime. Moreover, the high detection efficiency for quantum degenerate atoms distinguishes the cavity as a sensitive and weakly invasive probe for cold atomic clouds.

arXiv:cond-mat/0603279Review of Scientific InstrumentsJun 1, 200647 citations

Cavity QED in a High NA Resonator

Danial Shadmany, Aishwarya Kumar, Anna Soper +8 more

From fundamental studies of light-matter interaction to applications in quantum networking and sensing, cavity quantum electrodynamics (QED) provides a platform-crossing toolbox to control interactions between atoms and photons. The coherence of such interactions is determined by the product of the single-pass atomic absorption and the number of photon round-trips. Reducing the cavity loss has enabled resonators supporting nearly 1-million optical roundtrips at the expense of severely limited optical material choices and increased alignment sensitivity. The single-pass absorption probability can be increased through the use of near-concentric, fiber or nanophotonic cavities, which reduce the mode waists at the expense of constrained optical access and exposure to surface fields. Here we present a new high numerical-aperture, lens-based resonator that pushes the single-atom-single-photon absorption probability per round trip close to its fundamental limit by reducing the mode size at the atom below a micron while keeping the atom mm-to-cm away from all optics. This resonator provides strong light-matter coupling in a cavity where the light circulates only ~ 10 times. We load a single 87Rb atom into such a cavity, observe strong coupling, demonstrate cavity-enhanced atom detection with imaging fidelity of 99.55(6) percent and survival probability of 99.89(4) percent in 130 microseconds, and leverage this new platform for a time-resolved exploration of cavity cooling. The resonator's loss-resilience paves the way to coupling of atoms to nonlinear and adaptive optical elements and provides a minimally invasive route to readout of defect centers. Introduction of intra-cavity imaging systems will enable the creation of cavity arrays compatible with Rydberg atom array computing technologies, vastly expanding the applicability of the cavity QED toolbox.

arXiv:2407.04784Jul 5, 20240 citations

Cavity Microscope for Micrometer-Scale Control of Atom-Photon Interactions

Francesca Orsi, Nick Sauerwein, Rohit Prasad Bhatt +5 more

Cavity quantum electrodynamics offers the possibility of observing and controlling the motion of a few or individual atoms, enabling the realization of various quantum technological tasks such as quantum enhanced metrology or quantum simulation of strongly correlated matter. A core limitation of these experiments lies in the mode structure of the cavity field, which is hard coded in the shape and geometry of the mirrors. As a result, most applications of cavity QED trade spatial resolution for enhanced sensitivity. Here, we propose and demonstrate a cavity-microscope device capable of controlling in space and time the coupling between atoms and light in a single-mode high-finesse cavity, reaching a spatial resolution an order of magnitude lower than the cavity-mode waist. This is achieved through local Floquet engineering of the atomic level structure, imprinting a corresponding atom-field coupling. We illustrate this capability by engineering micrometer-scale coupling, using cavity-assisted atomic measurements and optimization. Our system forms an optical device with a single optical axis, has the same footprint and complexity as a standard Fabry-Perot cavity or confocal lens pair, and can be used for any atomic species. This technique opens a wide range of perspectives, from ultrafast cavity-enhanced midcircuit readout to the quantum simulation of fully connected models of quantum matter such as the Sachdev-Ye-Kitaev model. Published by the American Physical Society 2024

arXiv:2405.03550PRX QuantumDec 2, 20249 citations