Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1007.0335 · Physical Review E

Carnot's theorem for nonthermal stationary reservoirs

Simone De Liberato, Masahito Ueda

Published Nov 21, 2011• 27 citations
arXivHTMLPDF

Abstract

Carnot's theorem poses a fundamental limit on the maximum efficiency achievable from an engine that works between two reservoirs at thermal equilibrium. We extend this result to the case of arbitrary nonthermal stationary reservoirs, even with quantum coherence. In order to do this we prove that a single nonthermal reservoir is formally equivalent to multiple equilibrium ones. Finally, we discuss the possibility of realizing an engine that works at unit efficiency by exploiting quantum coherence present in the reservoir.

DOI
10.1103/physreve.84.051122

Related papers

Quantum heat engines with Carnot efficiency at maximum power

Mohit Lal Bera, Sergi Julià-Farré, Maciej Lewenstein +1 more

Heat engines constitute the major building blocks of modern technologies. However, conventional heat engines with higher power yield lesser efficiency and vice versa and respect various power-efficiency trade-off relations. This is also assumed to be true for the engines operating in the quantum regime. Here we show that these relations are not fundamental. We introduce quantum heat engines that deliver maximum power with Carnot efficiency in the one-shot finite-size regime. These engines are composed of working systems with a finite number of quantum particles and are restricted to one-shot measurements. The engines operate in a one-step cycle by letting the working system simultaneously interact with hot and cold baths via semilocal thermal operations. By allowing quantum entanglement between its constituents and, thereby, a coherent transfer of heat from hot to cold baths, the engine implements the fastest possible reversible state transformation in each cycle, resulting in maximum power and Carnot efficiency. Finally, we propose a physically realizable engine using quantum optical systems.

arXiv:2106.01193•Physical Review Research•Feb 25, 2022•29 citations

Beyond the Carnot Limit in the Internal Cycles of a Quantum Heat Engine under Finite Heat Reservoirs

L. -L. Yan, M. -R. Yun, Ming Li +4 more

We investigate, in an analytical fashion, quantum Carnot cycles of a microscopic heat engine coupled to two nite heat reservoirs, whose internal cycles could own higher e ciency than the standard Carnot limit without consuming extra quantum resources, e.g., coherence or squeezing properties. The engine runs time-dependently, involving both the internal and external cycles to collaboratively accomplish a complete Carnot cycle, and the e ciency of the engine depends on the reservoirs heat capacities and the working substance. Our analytical results of the maximum efficiency and the maximum power output clarify the mechanism behind the high performance of the microscopic engines, displaying the key roles played by the nite-sized heat reservoirs. Our proposal is generally valid for any microscopic thermodynamic system and fully feasible under current laboratory conditions.

arXiv:2409.00914•Sep 2, 2024•0 citations

Exploiting coherence for quantum thermodynamic advantage

Kenza Hammam, Heather Leitch, Y. Hassouni +1 more

Abstract The introduction of the quantum analogue of a Carnot engine based on a bath comprising of particles with a small amount of coherence initiated an active line of research on the harnessing of different quantum resources for the enhancement of thermal machines beyond the standard reversible limit, with an emphasis on non-thermal baths containing quantum coherence. In our work, we investigate the impact of coherence on the thermodynamic tasks of a collision model which is composed of a system interacting, in the continuous time limit, with a series of coherent ancillas of two baths at different temperatures. Our results show the advantages of utilising coherence as a resource in the operation of the machine, and allows it: (a) to exhibit unconventional behaviour such as the appearance of a hybrid refrigerator, capable of simultaneous refrigeration and generation of work, and (b) to function as an engine or a refrigerator with efficiencies larger than the Carnot bound. Moreover, we find an effective upper bound to the efficiency of the thermal machine operating as an engine in the presence of a coherent reservoir.

arXiv:2202.07515•New Journal of Physics•Nov 1, 2022•43 citations

Mechanical equivalent of quantum heat engines

Jacques Arnaud, Laurent Chusseau, Fabrice Philippe

Quantum heat engines employ as working agents multilevel systems instead of classical gases. We show that under some conditions quantum heat engines are equivalent to a series of reservoirs at different altitudes containing balls of various weights. A cycle consists of picking up at random a ball from one reservoir and carrying it to the next, thereby performing or absorbing some work. In particular, quantum heat engines, employing two-level atoms as working agents, are modeled by reservoirs containing balls of weight 0 or 1. The mechanical model helps us prove that the maximum efficiency of quantum heat engines is the Carnot efficiency. Heat pumps and negative temperatures are considered.

Physical Review E•Jun 3, 2008•27 citations

The maximum efficiency of nano heat engines depends on more than temperature

Mischa P. Woods, Nelly H. Y. Ng, Stephanie Wehner

Sadi Carnot's theorem regarding the maximum efficiency of heat engines is considered to be of fundamental importance in thermodynamics. This theorem famously states that the maximum efficiency depends only on the temperature of the heat baths used by the engine, but not on the specific structure of baths. Here, we show that when the heat baths are finite in size, and when the engine operates in the quantum nanoregime, a revision to this statement is required. We show that one may still achieve the Carnot efficiency, when certain conditions on the bath structure are satisfied; however if that is not the case, then the maximum achievable efficiency can reduce to a value which is strictly less than Carnot. We derive the maximum efficiency for the case when one of the baths is composed of qubits. Furthermore, we show that the maximum efficiency is determined by either the standard second law of thermodynamics, analogously to the macroscopic case, or by the non increase of the max relative entropy, which is a quantity previously associated with the single shot regime in many quantum protocols. This relative entropic quantity emerges as a consequence of additional constraints, called generalized free energies, that govern thermodynamical transitions in the nanoregime. Our findings imply that in order to maximize efficiency, further considerations in choosing bath Hamiltonians should be made, when explicitly constructing quantum heat engines in the future. This understanding of thermodynamics has implications for nanoscale engineering aiming to construct small thermal machines.

arXiv:1506.02322•Quantum•Aug 19, 2019•37 citations

Efficiency at maximum power output of quantum heat engines under finite-time operation

Jianhui Wang, Jizhou He, Zhaoqi Wu

We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures ${T}_{h}$ and ${T}_{c}$, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.

arXiv:1111.5077•Physical Review E•Mar 29, 2012•66 citations
Carnot's theorem poses a fundamental limit on the maximum efficiency achievable from an engine that works between two reservoirs at thermal equilibrium. We extend this result to the case of arbitrary nonthermal stationary reservoirs, even with quantum coherence. In order to do this we prove that a single nonthermal reservoir is formally equivalent to multiple equilibrium ones. Finally, we discuss the possibility of realizing an engine that works at unit efficiency by exploiting quantum coherence present in the reservoir.
Heat engines constitute the major building blocks of modern technologies. However, conventional heat engines with higher power yield lesser efficiency and vice versa and respect various power-efficiency trade-off relations. This is also assumed to be true for the engines operating in the quantum regime. Here we show that these relations are not fundamental. We introduce quantum heat engines that deliver maximum power with Carnot efficiency in the one-shot finite-size regime. These engines are composed of working systems with a finite number of quantum particles and are restricted to one-shot measurements. The engines operate in a one-step cycle by letting the working system simultaneously interact with hot and cold baths via semilocal thermal operations. By allowing quantum entanglement between its constituents and, thereby, a coherent transfer of heat from hot to cold baths, the engine implements the fastest possible reversible state transformation in each cycle, resulting in maximum power and Carnot efficiency. Finally, we propose a physically realizable engine using quantum optical systems.
We investigate, in an analytical fashion, quantum Carnot cycles of a microscopic heat engine coupled to two nite heat reservoirs, whose internal cycles could own higher e ciency than the standard Carnot limit without consuming extra quantum resources, e.g., coherence or squeezing properties. The engine runs time-dependently, involving both the internal and external cycles to collaboratively accomplish a complete Carnot cycle, and the e ciency of the engine depends on the reservoirs heat capacities and the working substance. Our analytical results of the maximum efficiency and the maximum power output clarify the mechanism behind the high performance of the microscopic engines, displaying the key roles played by the nite-sized heat reservoirs. Our proposal is generally valid for any microscopic thermodynamic system and fully feasible under current laboratory conditions.
Abstract The introduction of the quantum analogue of a Carnot engine based on a bath comprising of particles with a small amount of coherence initiated an active line of research on the harnessing of different quantum resources for the enhancement of thermal machines beyond the standard reversible limit, with an emphasis on non-thermal baths containing quantum coherence. In our work, we investigate the impact of coherence on the thermodynamic tasks of a collision model which is composed of a system interacting, in the continuous time limit, with a series of coherent ancillas of two baths at different temperatures. Our results show the advantages of utilising coherence as a resource in the operation of the machine, and allows it: (a) to exhibit unconventional behaviour such as the appearance of a hybrid refrigerator, capable of simultaneous refrigeration and generation of work, and (b) to function as an engine or a refrigerator with efficiencies larger than the Carnot bound. Moreover, we find an effective upper bound to the efficiency of the thermal machine operating as an engine in the presence of a coherent reservoir.
Quantum heat engines employ as working agents multilevel systems instead of classical gases. We show that under some conditions quantum heat engines are equivalent to a series of reservoirs at different altitudes containing balls of various weights. A cycle consists of picking up at random a ball from one reservoir and carrying it to the next, thereby performing or absorbing some work. In particular, quantum heat engines, employing two-level atoms as working agents, are modeled by reservoirs containing balls of weight 0 or 1. The mechanical model helps us prove that the maximum efficiency of quantum heat engines is the Carnot efficiency. Heat pumps and negative temperatures are considered.
Sadi Carnot's theorem regarding the maximum efficiency of heat engines is considered to be of fundamental importance in thermodynamics. This theorem famously states that the maximum efficiency depends only on the temperature of the heat baths used by the engine, but not on the specific structure of baths. Here, we show that when the heat baths are finite in size, and when the engine operates in the quantum nanoregime, a revision to this statement is required. We show that one may still achieve the Carnot efficiency, when certain conditions on the bath structure are satisfied; however if that is not the case, then the maximum achievable efficiency can reduce to a value which is strictly less than Carnot. We derive the maximum efficiency for the case when one of the baths is composed of qubits. Furthermore, we show that the maximum efficiency is determined by either the standard second law of thermodynamics, analogously to the macroscopic case, or by the non increase of the max relative entropy, which is a quantity previously associated with the single shot regime in many quantum protocols. This relative entropic quantity emerges as a consequence of additional constraints, called generalized free energies, that govern thermodynamical transitions in the nanoregime. Our findings imply that in order to maximize efficiency, further considerations in choosing bath Hamiltonians should be made, when explicitly constructing quantum heat engines in the future. This understanding of thermodynamics has implications for nanoscale engineering aiming to construct small thermal machines.
We study the efficiency at maximum power, ${\ensuremath{\eta}}_{m}$, of irreversible quantum Carnot engines (QCEs) that perform finite-time cycles between a hot and a cold reservoir at temperatures Th{T}_{h}Th​ and Tc{T}_{c}Tc​, respectively. For QCEs in the reversible limit (long cycle period, zero dissipation), ${\ensuremath{\eta}}_{m}$ becomes identical to the Carnot efficiency ${\ensuremath{\eta}}_{{}_{C}}=1\ensuremath{-}{T}_{c}/{T}_{h}$. For QCE cycles in which nonadiabatic dissipation and the time spent on two adiabats are included, the efficiency ${\ensuremath{\eta}}_{m}$ at maximum power output is bounded from above by ${\ensuremath{\eta}}_{{}_{C}}/(2\ensuremath{-}{\ensuremath{\eta}}_{{}_{C}})$ and from below by ${\ensuremath{\eta}}_{{}_{C}}/2$. In the case of symmetric dissipation, the Curzon-Ahlborn efficiency ${\ensuremath{\eta}}_{{}_{\mathit{CA}}}=1\ensuremath{-}\sqrt{{T}_{c}/{T}_{h}}$ is recovered under the condition that the time allocation between the adiabats and the contact time with the reservoir satisfy a certain relation.