Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1003.0266 · Applied Physics B

Low noise amplification of an optically carried microwave signal: application to atom interferometry

Thomas Lévèque, A. Gauguet, Walid Chaibi, Arnaud Landragin

Published Jun 14, 2010• 14 citations
arXivHTMLPDF
DOI
10.1007/s00340-010-4082-y

Related papers

Low-Noise Amplification, Detection and Spectroscopy of Ultra-Cold Systems in RF Cavities

M. H. S. Bukhari, Zahoor H. Shah

The design and development of a cryogenic Ultra-Low-Noise Signal Amplification (ULNA) and detection system for spectroscopy of ultra-cold systems are reported here for the operation in the 0.5 - 4 GHz spectrum of frequencies (the “L” and “S” microwave bands). The design is suitable for weak RF signal detection and spectroscopy from ultra-cold systems confined in cryogenic RF cavities, as entailed in a number of physics, physical chemistry and analytical chemistry applications, such as NMR/NQR/EPR and microwave spectroscopy, Paul traps, Bose-Einstein Condensates (BEC’s) and cavity Quantum Electrodynamics (cQED). Using a generic Low-Noise Amplifier (LNA) architecture for a GaAs enhancement mode High-Electron Mobility FET device, our design has especially been devised for scientific applications where ultra-low-noise amplification systems are sought to amplify and detect weak RF signals under various conditions and environments, including cryogenic temperatures, with the least possible noise susceptibility. The amplifier offers a 16 dB gain and a 0.8 dB noise figure at 2.5 GHz, while operating at room temperature, which can improve significantly at low temperatures. Both dc and RF outputs are provided by the amplifier to integrate it in a closed-loop or continuous-wave spectroscopy system or connect it to a variety of instruments, a factor which is lacking in commercial LNA devices. Following the amplification stage, the RF signal detection is carried out with the help of a post-amplifier and detection system based upon a set of Zero-Bias Schottky Barrier Diodes (ZBD’s) and a high-precision ultra-low noise jFET operational amplifier. The scheme offers unique benefits of sensitive detection and very-low noise amplification for measuring extremely weak on-resonance signals with substantial low- noise response and excellent stability while eliminating complicated and expensive heterodyne schemes. The LNA stage is fully capable to be a part of low-temperature experiments while being operated in cryogenic conditions down to about 500 mK.

Modern Instrumentation•Jan 1, 2016•4 citations

Atom Interferometry in an Optical Cavity and Applications

Justin Brown, Brian Estey, Paul Hamilton +1 more

Bulletin of the American Physical Society•Jun 6, 2013•0 citations

Microwave Emission from an Optically Pumped Atomic System

Vernon E. Derr, James Joseph Gallagher, R. E. Johnson +1 more

Physical Review Letters•Oct 1, 1960•2 citations

Robust interferometry against imperfections based on weak value amplification

Chen Fang, Jingzheng Huang, Guihua Zeng

Optical interferometry has been widely used in various high-precision applications. Usually, the minimum precision of an interferometry is limited by various technical noises in practice. To suppress such kinds of noises, we propose a scheme which combines the weak measurement with the standard interferometry. The proposed scheme dramatically outperforms the standard interferometry in the signal-to-noise ratio and the robustness against noises caused by the optical elements' reflections and the offset fluctuation between two paths. A proof-of-principle experiment is demonstrated to validate the amplification theory.

arXiv:1803.08644•Physical Review A•Jun 11, 2018•14 citations

Quantum Optics at Microwave Frequencies

Daniel F. Walls, Gerard J Milburn

Graduate texts in physics•Jan 1, 2025•0 citations

Energy Absorption Interferometry

Stafford Withington, Willem Jellema

Energy Absorption Interferometry (EAI) is a technique for measuring the responsivities and complex-valued spatial polarimetric forms of the individual degrees of freedom through which a many-body system can absorb energy. It was originally formulated using the language of quantum correlation functions, making it applicable to different kinds of excitation (electromagnetic, elastic and acoustic fields). EAI has been applied in a variety of theoretical and experimental ways. It is particularly effective at characterising the multimode behaviour of ultra-low-noise far-infrared and optical devices, imaging arrays, and complete instruments, where it can be used to ensure that a system is maximally responsive to those partially coherent fields that carry signal whilst avoiding those that only carry noise. Despite its utility there is no comprehensive overview of electromagnetic EAI. In this paper we describe the theoretical foundations of the method, and present a range of new techniques in areas relating to sampling, phase referencing, mode reconstruction and noise. We present, for the first time, an analysis of how noise propagates through an experiment resulting in errors and artefacts on spectral and modal plots. A noise model is essential, because it determines the signal to noise ratio needed to ensure a given level of experimental fidelity.

physics.opticsCross-listedarXiv:2602.00745•Feb 3, 2026
The design and development of a cryogenic Ultra-Low-Noise Signal Amplification (ULNA) and detection system for spectroscopy of ultra-cold systems are reported here for the operation in the 0.5 - 4 GHz spectrum of frequencies (the “L” and “S” microwave bands). The design is suitable for weak RF signal detection and spectroscopy from ultra-cold systems confined in cryogenic RF cavities, as entailed in a number of physics, physical chemistry and analytical chemistry applications, such as NMR/NQR/EPR and microwave spectroscopy, Paul traps, Bose-Einstein Condensates (BEC’s) and cavity Quantum Electrodynamics (cQED). Using a generic Low-Noise Amplifier (LNA) architecture for a GaAs enhancement mode High-Electron Mobility FET device, our design has especially been devised for scientific applications where ultra-low-noise amplification systems are sought to amplify and detect weak RF signals under various conditions and environments, including cryogenic temperatures, with the least possible noise susceptibility. The amplifier offers a 16 dB gain and a 0.8 dB noise figure at 2.5 GHz, while operating at room temperature, which can improve significantly at low temperatures. Both dc and RF outputs are provided by the amplifier to integrate it in a closed-loop or continuous-wave spectroscopy system or connect it to a variety of instruments, a factor which is lacking in commercial LNA devices. Following the amplification stage, the RF signal detection is carried out with the help of a post-amplifier and detection system based upon a set of Zero-Bias Schottky Barrier Diodes (ZBD’s) and a high-precision ultra-low noise jFET operational amplifier. The scheme offers unique benefits of sensitive detection and very-low noise amplification for measuring extremely weak on-resonance signals with substantial low- noise response and excellent stability while eliminating complicated and expensive heterodyne schemes. The LNA stage is fully capable to be a part of low-temperature experiments while being operated in cryogenic conditions down to about 500 mK.
Optical interferometry has been widely used in various high-precision applications. Usually, the minimum precision of an interferometry is limited by various technical noises in practice. To suppress such kinds of noises, we propose a scheme which combines the weak measurement with the standard interferometry. The proposed scheme dramatically outperforms the standard interferometry in the signal-to-noise ratio and the robustness against noises caused by the optical elements' reflections and the offset fluctuation between two paths. A proof-of-principle experiment is demonstrated to validate the amplification theory.
Energy Absorption Interferometry (EAI) is a technique for measuring the responsivities and complex-valued spatial polarimetric forms of the individual degrees of freedom through which a many-body system can absorb energy. It was originally formulated using the language of quantum correlation functions, making it applicable to different kinds of excitation (electromagnetic, elastic and acoustic fields). EAI has been applied in a variety of theoretical and experimental ways. It is particularly effective at characterising the multimode behaviour of ultra-low-noise far-infrared and optical devices, imaging arrays, and complete instruments, where it can be used to ensure that a system is maximally responsive to those partially coherent fields that carry signal whilst avoiding those that only carry noise. Despite its utility there is no comprehensive overview of electromagnetic EAI. In this paper we describe the theoretical foundations of the method, and present a range of new techniques in areas relating to sampling, phase referencing, mode reconstruction and noise. We present, for the first time, an analysis of how noise propagates through an experiment resulting in errors and artefacts on spectral and modal plots. A noise model is essential, because it determines the signal to noise ratio needed to ensure a given level of experimental fidelity.