Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0903.2953 · Review of Scientific Instruments

Tapered optical fibers as tools for probing magneto-optical trap characteristics

Michael Morrissey, Kieran Deasy, Yuqiang Wu, Shrabana Chakrabarti, Síle Nic Chormaic

Published May 1, 2009• 74 citations
arXivHTMLPDF

Abstract

We present a novel technique for measuring the characteristics of a magneto-optical trap (MOT) for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the nanofiber is highly sensitive to very small numbers of atoms close to its surface. The size and shape of the MOT, determined by translating the cold atom cloud across the tapered fiber, is in excellent agreement with measurements obtained using the conventional method of fluorescence imaging using a charge coupled device camera. The coupling of atomic fluorescence into the tapered fiber also allows us to monitor the loading and lifetime of the trap. The results are compared to those achieved by focusing the MOT fluorescence onto a photodiode and it was seen that the tapered fiber gives slightly longer loading and lifetime measurements due to the sensitivity of the fiber, even when very few atoms are present.

DOI
10.1063/1.3117201

Related papers

Optical Nanofibers for Probing Cold Atoms

Michael M. Morrissey, Kieran Deasy, Laura Russell +2 more

We present a novel technique for measuring the characteristics of a cloud of cold atoms by monitoring the spontaneous emission coupled into the guided mode of a nanofiber. We show that the fiber is very sensitive to the atoms close to its surface.

Conference on Lasers and Electro-Optics•Jan 1, 2009•0 citations

Tapered optical nanofiber for light-atom interfacing

Aveek Chandra

This project aims to develop scientific as well as technical foundations towards realization of a novel platform for light-matter interaction based on tapered optical nanofibers that enable to interface neutral atoms in their vicinity. A setup for magneto-optical trap (MOT) has been built. Tapered nanofibers (TNFs) of sub-wavelength diameter, with transmission of 95 percent have been fabricated and characterized. Next, a nanofiber is transferred into the MOT setup and installed inside the vacuum chamber. The MOT cloud and nanofiber are made to spatially overlap inside ultra-high vacuum (UHV). Coupling of fluorescence of MOT into the guided mode of TNF has been observed. This clearly shows the coupling of atoms with the fiber-guided mode and that our interface works. In addition, 65-70 percent absorption of a free space beam by the atomic cloud has been observed and the relevant MOT parameters are obtained from it. Our efforts are directed towards observing interaction of atoms with the fiber-guided light via evanescent field. Attempts have been made to observe absorption of a probe beam through the nanofiber by the MOT cloud and techniques for switching on-off the MOT beams, the probe beam and the magnetic field are developed for that purpose. Ultimately, the goal will be to trap atoms in the vicinity of a nanofiber enabling to reach a large optical depth accompanied by the ability to reach high intensities for low optical power. I will present my work on the development of this MOT-nanofiber interface - a new promising platform for research in nonlinear quantum optics, quantum information science and technology, quantum communication and hybrid quantum system.

•Jan 1, 2014•0 citations

Optimization of a magneto–optic trap using nanofibers*

Xin Wang, Li-Jun Song, Chenxi Wang +3 more

We experimentally demonstrate a reliable method based on a nanofiber to optimize the number of cold atoms in a magneto–optical trap (MOT) and to monitor the MOT in real time. The atomic fluorescence is collected by a nanofiber with subwavelength diameter of about 400 nm. The MOT parameters are experimentally adjusted in order to match the maximum number of cold atoms provided by the fluorescence collected by the nanofiber. The maximum number of cold atoms is obtained when the intensities of the cooling and re-pumping beams are about 23.5 mW/cm2 and 7.1 mW/cm2, respectively; the detuning of the cooling beam is −13.0 MHz, and the axial magnetic gradient is about 9.7 Gauss/cm. We observe a maximum photon counting rate of nearly (4.5±0.1) × 105 counts/s. The nanofiber–atom system can provide a powerful and flexible tool for sensitive atom detection and for monitoring atom–matter coupling. It can be widely used from quantum optics to quantum precision measurement.

Chinese Physics B•Jul 1, 2019•7 citations

Study of laser induced fluorescence spectrum of atoms using optical nanofibers

Manoj Das

Fluorescence of atoms has been the subject of interest in quantum optical measurementsfor many years. The atomic fluorescence is routinely used as a tool to detectatoms, to generate photons and to generate non-classical states of light. One of thewidely used methods to investigate the atomic fluorescence is laser-induced fluorescencespectroscopy. This thesis presents the development of optical nanofibers as atool for the measurement of fluorescence spectrum of atoms.Optical nanofibers are ultrathin optical fibers, with diameters less than the propagationwavelength of the fiber, with a silica core and a vacuum clad. Such opticalnanofibers can support only the single propagating guided-mode. The guided-modesof the nanofiber is confined in the transverse direction of the nanofiber and a partof the propagating field lies outside the fiber, in the evanescent region of the fiber.The mode density of the electromagnetic field is modified by the nanofiber. Due tothe modification of mode density, the spontaneous emission of atoms is modified bythe optical nanofibers and the confinement of the guided-modes results in a strongchanneling of spontaneous emission of atoms into the guided-modes of the nanofiber.Such a property of nanofibers can be used to study fluorescence of atoms around thenanofiber.Optical nanofibers are prepared by the adiabatic tapering of single-mode opticalfibers. Our experiments are performed by overlapping cold Cesium atoms, from amagneto-optical trap (MOT), with the optical nanofiber and observing the fluorescencethrough the guided-modes of the nanofiber. The nanofiber suppresses with highprobability any coupling of scattering light from the excitation laser into the guidedmodesand high coupling efficiency of fluorescence into the guided-modes enables us tomeasure the fluorescence spectrum of atoms present around the nanofiber with a goodsignal-to-noise ratio. In this thesis, we demonstrate the measurement of laser inducedfluorescence (LIF) emission spectra of strongly driven atoms using optical nanofibers.For the fluorescence emission spectrum measurements, we develop and demonstrate anew sensitive and high resolution method consisting of optical heterodyne techniqueand photon correlation spectroscopy. The key point of the method is to extract theinformation of first-order field correlation function from the measured second-orderintensity correlation function. The Fourier transform of the field correlation functionthen gives the fluorescence emission spectrum.The atoms emitting fluorescence in the guided-modes of the nanofiber lie very closeto the nanofiber surface and are subjected to atom-surface interactions. It has beenreported in earlier experiments on nanofiber, that such surface interactions can bemodified by irradiating the MOT-atoms overlapped with the nanofiber with UV lasers.After such irradiations, MOT-atoms are kept from falling into the surface-potentialand behave almost like free-space atoms around the nanofiber. We first perform ourfluorescence spectra measurements under this free-atom conditions. The observedexcitation spectrum lineshape shows a free-atom like Lorentzian behavior, with avery small tail in the red-detuned side (red-tail). The red-tail has been attributedto photoassociation process, due to atoms making transition from free ground statesto bound excited states of the surface potential. Under this conditions, the emissionspectra measured for on-resonant and off-resonant excitations show the well-knownthree-peak Mollow-triplet spectrum of free-space two-level atoms. The observationconfirms that the near surface atoms behave like free-space atoms. Also, the quantitativeagreement between the observed spectra with the theoretical calculationsdemonstrates the validity of the optical nanofiber method for measuring fluorescenceemission spectrum of atoms.As mentioned above, since we are observing near-surface atoms, fluorescence measurementsbased on optical nanofibers may become a unique tool to probe atomsurfaceinteractions. In earlier experiments using nanofiber, signatures of atomsurfaceinteraction have been observed in the excitation spectrum of atoms, in theform of a broad red-tail. The lineshape of the excitation spectrum is understood as aresult of a process where atoms approaching the nanofiber surface fall into the shallowsurface potential, forming long-range atom-surface bound states. In this thesis,we have systematically investigated the evolution of the lineshape of the excitationspectrum from a Lorentzian shape to a broad red-tail condition. The evolution of thespectrum lineshape has been attributed to the changing nanofiber surface condition.The spectrum shape is found to depend on the flux of background Cs-atoms. Wespeculate that this might be due to the adsorption of hot background atoms ontothe nanofiber surface, which changes the surface condition of the nanofiber locallyand helps in loading of cold MOT-atoms into the shallow surface potential. We havefound that the effect of UV laser irradiation is to photoionize the MOT-atoms, andthe generated photoelectrons might help in the desorption of adsorbed atoms on thesurface. We discuss the roles of adsorption and desorption of atoms on the surfaceconditions. We have shown that such changing surface condition can be controlledby adjusting the hot background atom flux and the UV laser intensity. Under suchcontrolled surface condition, we have measured the emission spectrum. The observedemission spectrum under the broad red-tail condition can be explained only by includingthe surface interactions. We also discuss qualitatively the phonon-mode densityfor nanofiber at room temperature and the phonon-mediated decay of atoms in thesurface potential.This work may open up the way for using optical nanofibers as a tool to investigatethe laser-induced fluorescence spectrum of strongly driven atoms, and to study atomsurfaceinteractions. In the future, we hope to create optical dipole traps around thenanofibers by introducing trap laser lights through the guided-modes and performfluorescence measurements of these trapped atoms.

•Jan 1, 2011•0 citations

Multicore fiber for cold-atomic cloud monitoring

Jean‐François Clément, Denis Bacquet, Alexandre Kudlinski +4 more

Thanks to an all solid core photonic crystal fiber (PCF) used as a multicore fiber, we propose and experimentally demonstrate what is to our knowledge a new optical detection scheme for the spontaneous emission collection of cold atoms. A Magneto-Optical Trap (MOT) is placed in front of a polished PCF end-face. As they display a higher optical index than the surrounding cladding silica, the 108 rods (equivalent to a 108 pixels camera) of this PCF are light guiding and behave like an array of detectors. Both global and local properties of the trapped atoms are probed. A MOT lifetime is reported. We also take advantage of the multi-core geometry for a real time detection of the center-of-mass motion of the atomic cloud.

Optics Express•Oct 27, 2011•2 citations

Probing cold atom interactions via optical nanofibers

Síle Nic Chormaic, Alexey Vylegzhanin, Zohreh Shahrabifarahani +6 more

Optical nanofibers – very thin, tapered optical fibers where the waist diameter is less than the propagating light wavelength – have been shown to be very useful tools for atom-light interactions. Their small size and relative ease of integration into optical fiber-based experimental setups, in addition to their minimal perturbation on magneto-optically trapped cold atoms, have ensured their adoption into cold atom physics. Here, we will discuss some recent applications of optical nanofibers to manipulate, trap, and control cold 87Rb atoms in ground or Rydberg states. We will present some recent experimental and theoretical results related to the interactions between the atoms and the optical nanofiber field and introduce some of the limitations observed.

Optical and Quantum Sensing and Precision Metrology II•Mar 8, 2023•0 citations
We present a novel technique for measuring the characteristics of a magneto-optical trap (MOT) for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the nanofiber is highly sensitive to very small numbers of atoms close to its surface. The size and shape of the MOT, determined by translating the cold atom cloud across the tapered fiber, is in excellent agreement with measurements obtained using the conventional method of fluorescence imaging using a charge coupled device camera. The coupling of atomic fluorescence into the tapered fiber also allows us to monitor the loading and lifetime of the trap. The results are compared to those achieved by focusing the MOT fluorescence onto a photodiode and it was seen that the tapered fiber gives slightly longer loading and lifetime measurements due to the sensitivity of the fiber, even when very few atoms are present.
This project aims to develop scientific as well as technical foundations towards realization of a novel platform for light-matter interaction based on tapered optical nanofibers that enable to interface neutral atoms in their vicinity. A setup for magneto-optical trap (MOT) has been built. Tapered nanofibers (TNFs) of sub-wavelength diameter, with transmission of 95 percent have been fabricated and characterized. Next, a nanofiber is transferred into the MOT setup and installed inside the vacuum chamber. The MOT cloud and nanofiber are made to spatially overlap inside ultra-high vacuum (UHV). Coupling of fluorescence of MOT into the guided mode of TNF has been observed. This clearly shows the coupling of atoms with the fiber-guided mode and that our interface works. In addition, 65-70 percent absorption of a free space beam by the atomic cloud has been observed and the relevant MOT parameters are obtained from it. Our efforts are directed towards observing interaction of atoms with the fiber-guided light via evanescent field. Attempts have been made to observe absorption of a probe beam through the nanofiber by the MOT cloud and techniques for switching on-off the MOT beams, the probe beam and the magnetic field are developed for that purpose. Ultimately, the goal will be to trap atoms in the vicinity of a nanofiber enabling to reach a large optical depth accompanied by the ability to reach high intensities for low optical power. I will present my work on the development of this MOT-nanofiber interface - a new promising platform for research in nonlinear quantum optics, quantum information science and technology, quantum communication and hybrid quantum system.
We experimentally demonstrate a reliable method based on a nanofiber to optimize the number of cold atoms in a magneto–optical trap (MOT) and to monitor the MOT in real time. The atomic fluorescence is collected by a nanofiber with subwavelength diameter of about 400 nm. The MOT parameters are experimentally adjusted in order to match the maximum number of cold atoms provided by the fluorescence collected by the nanofiber. The maximum number of cold atoms is obtained when the intensities of the cooling and re-pumping beams are about 23.5 mW/cm2 and 7.1 mW/cm2, respectively; the detuning of the cooling beam is −13.0 MHz, and the axial magnetic gradient is about 9.7 Gauss/cm. We observe a maximum photon counting rate of nearly (4.5±0.1) × 105 counts/s. The nanofiber–atom system can provide a powerful and flexible tool for sensitive atom detection and for monitoring atom–matter coupling. It can be widely used from quantum optics to quantum precision measurement.
Fluorescence of atoms has been the subject of interest in quantum optical measurementsfor many years. The atomic fluorescence is routinely used as a tool to detectatoms, to generate photons and to generate non-classical states of light. One of thewidely used methods to investigate the atomic fluorescence is laser-induced fluorescencespectroscopy. This thesis presents the development of optical nanofibers as atool for the measurement of fluorescence spectrum of atoms.Optical nanofibers are ultrathin optical fibers, with diameters less than the propagationwavelength of the fiber, with a silica core and a vacuum clad. Such opticalnanofibers can support only the single propagating guided-mode. The guided-modesof the nanofiber is confined in the transverse direction of the nanofiber and a partof the propagating field lies outside the fiber, in the evanescent region of the fiber.The mode density of the electromagnetic field is modified by the nanofiber. Due tothe modification of mode density, the spontaneous emission of atoms is modified bythe optical nanofibers and the confinement of the guided-modes results in a strongchanneling of spontaneous emission of atoms into the guided-modes of the nanofiber.Such a property of nanofibers can be used to study fluorescence of atoms around thenanofiber.Optical nanofibers are prepared by the adiabatic tapering of single-mode opticalfibers. Our experiments are performed by overlapping cold Cesium atoms, from amagneto-optical trap (MOT), with the optical nanofiber and observing the fluorescencethrough the guided-modes of the nanofiber. The nanofiber suppresses with highprobability any coupling of scattering light from the excitation laser into the guidedmodesand high coupling efficiency of fluorescence into the guided-modes enables us tomeasure the fluorescence spectrum of atoms present around the nanofiber with a goodsignal-to-noise ratio. In this thesis, we demonstrate the measurement of laser inducedfluorescence (LIF) emission spectra of strongly driven atoms using optical nanofibers.For the fluorescence emission spectrum measurements, we develop and demonstrate anew sensitive and high resolution method consisting of optical heterodyne techniqueand photon correlation spectroscopy. The key point of the method is to extract theinformation of first-order field correlation function from the measured second-orderintensity correlation function. The Fourier transform of the field correlation functionthen gives the fluorescence emission spectrum.The atoms emitting fluorescence in the guided-modes of the nanofiber lie very closeto the nanofiber surface and are subjected to atom-surface interactions. It has beenreported in earlier experiments on nanofiber, that such surface interactions can bemodified by irradiating the MOT-atoms overlapped with the nanofiber with UV lasers.After such irradiations, MOT-atoms are kept from falling into the surface-potentialand behave almost like free-space atoms around the nanofiber. We first perform ourfluorescence spectra measurements under this free-atom conditions. The observedexcitation spectrum lineshape shows a free-atom like Lorentzian behavior, with avery small tail in the red-detuned side (red-tail). The red-tail has been attributedto photoassociation process, due to atoms making transition from free ground statesto bound excited states of the surface potential. Under this conditions, the emissionspectra measured for on-resonant and off-resonant excitations show the well-knownthree-peak Mollow-triplet spectrum of free-space two-level atoms. The observationconfirms that the near surface atoms behave like free-space atoms. Also, the quantitativeagreement between the observed spectra with the theoretical calculationsdemonstrates the validity of the optical nanofiber method for measuring fluorescenceemission spectrum of atoms.As mentioned above, since we are observing near-surface atoms, fluorescence measurementsbased on optical nanofibers may become a unique tool to probe atomsurfaceinteractions. In earlier experiments using nanofiber, signatures of atomsurfaceinteraction have been observed in the excitation spectrum of atoms, in theform of a broad red-tail. The lineshape of the excitation spectrum is understood as aresult of a process where atoms approaching the nanofiber surface fall into the shallowsurface potential, forming long-range atom-surface bound states. In this thesis,we have systematically investigated the evolution of the lineshape of the excitationspectrum from a Lorentzian shape to a broad red-tail condition. The evolution of thespectrum lineshape has been attributed to the changing nanofiber surface condition.The spectrum shape is found to depend on the flux of background Cs-atoms. Wespeculate that this might be due to the adsorption of hot background atoms ontothe nanofiber surface, which changes the surface condition of the nanofiber locallyand helps in loading of cold MOT-atoms into the shallow surface potential. We havefound that the effect of UV laser irradiation is to photoionize the MOT-atoms, andthe generated photoelectrons might help in the desorption of adsorbed atoms on thesurface. We discuss the roles of adsorption and desorption of atoms on the surfaceconditions. We have shown that such changing surface condition can be controlledby adjusting the hot background atom flux and the UV laser intensity. Under suchcontrolled surface condition, we have measured the emission spectrum. The observedemission spectrum under the broad red-tail condition can be explained only by includingthe surface interactions. We also discuss qualitatively the phonon-mode densityfor nanofiber at room temperature and the phonon-mediated decay of atoms in thesurface potential.This work may open up the way for using optical nanofibers as a tool to investigatethe laser-induced fluorescence spectrum of strongly driven atoms, and to study atomsurfaceinteractions. In the future, we hope to create optical dipole traps around thenanofibers by introducing trap laser lights through the guided-modes and performfluorescence measurements of these trapped atoms.
Thanks to an all solid core photonic crystal fiber (PCF) used as a multicore fiber, we propose and experimentally demonstrate what is to our knowledge a new optical detection scheme for the spontaneous emission collection of cold atoms. A Magneto-Optical Trap (MOT) is placed in front of a polished PCF end-face. As they display a higher optical index than the surrounding cladding silica, the 108 rods (equivalent to a 108 pixels camera) of this PCF are light guiding and behave like an array of detectors. Both global and local properties of the trapped atoms are probed. A MOT lifetime is reported. We also take advantage of the multi-core geometry for a real time detection of the center-of-mass motion of the atomic cloud.
Optical nanofibers – very thin, tapered optical fibers where the waist diameter is less than the propagating light wavelength – have been shown to be very useful tools for atom-light interactions. Their small size and relative ease of integration into optical fiber-based experimental setups, in addition to their minimal perturbation on magneto-optically trapped cold atoms, have ensured their adoption into cold atom physics. Here, we will discuss some recent applications of optical nanofibers to manipulate, trap, and control cold 87Rb atoms in ground or Rydberg states. We will present some recent experimental and theoretical results related to the interactions between the atoms and the optical nanofiber field and introduce some of the limitations observed.