Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0901.2716 · Review of Scientific Instruments

Fast shuttling of ions in a scalable Penning trap array

D. R. Crick, S. Donnellan, Sharath Ananthamurthy, Richard Claude Thompson, D. M. Segal

Published Jan 1, 2010• 24 citations
arXivHTMLPDF

Abstract

We report on the design and testing of an array of Penning ion traps made from printed circuit board. The system enables fast shuttling of ions from one trapping zone to another, which could be of use in quantum information processing. We describe simulations carried out to determine the optimal potentials to be applied to the trap electrodes for enabling this movement. The results of a preliminary experiment with a cloud of laser cooled calcium ions demonstrate a round-trip shuttling efficiency of up to 75%.

DOI
10.1063/1.3276699

Related papers

Manipulation of Ca+ Ions in Penning Traps

D. R. Crick

The long term aim of this work is to study the suitability of using laser cooled Ca+ ions in Penning traps as the basic components of a quantum computer. A great deal of progress in the field of quantum computing has been made in recent years with laser cooled ions stored in radio frequency ion traps. Building a useful quantum computer with trapped ions is however extremely challenging. Penning traps offer some possible benefits over radio frequency traps. They also create some additional difficulties. The potential advantages and disadvantages of Penning traps are discussed throughout the thesis. We show that we are able to overcome the problems associated with laser cooling in Penning traps, and have trapped single ions for extended periods of time. Pairs of Ca+ ions have been aligned along the axis of a Penning trap, and have been optically resolved. A novel Penning trap array based on PCB boards has been developed. A prototype was built and tested, along with the electronics required to shuttle ions between different sub-traps. Ions have been shuttled a distance of 10 mm in 2.5 μs. A return trip efficiency of up to 75% was seen. A quantum effect – J-state mixing caused by large magnetic fields – has been observed for the first time in single atomic ions. The magnetic field causes a forbidden [Delta]J = 2 transition to become weakly allowed. This effect is of general interest in atomic physics, and is also very relevant for quantum computation studies. A quantitative prediction of the magnitude of the J-mixing effect has been derived theoretically. This is compared to experimental data, and is found to be in excellent qualitative and good quantitative agreement.

•May 1, 2009•1 citation

Transport of ions in a segmented linear Paul trap in printed-circuit-board technology

Huber, G., T. Deuschle, Wolfgang Schnitzler +3 more

We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 microns. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler cooled ion crystals of Ca-40 with this kind of traps. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2x2mm in a round-trip time of T=20us, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: For a slightly slower transport (a round-trip shuttle within T=30us) we observe non-adiabatic motional excitation of 0.89(15)meV.

arXiv:0711.2947•Nov 19, 2007•0 citations

Ion shuttling method for long-range shuttling of trapped ions in MEMS-fabricated ion traps

Minjae Lee, Junho Jeong, Yunjae Park +3 more

Abstract A large-scale ion trap array fabricated using the microelectromechanical systems (MEMS) technology is expected to be a promising device for building a practical quantum computer. Shuttling trapped ions is essential for operating scalable ion trap structures. This paper proposes an ion shuttling method for a MEMS-fabricated surface ion trap. Change of secular frequency of trapping potential can cause heating and subsequent loss of ions. Therefore, direct current voltage sets to form uniform ion trapping potentials around the ions while shuttling are calculated by simulations. A 32-channel digital-to-analog converter system is developed to apply the calculated voltage sets to the electrodes of the MEMS-fabricated surface ion trap. The shuttling process is experimented using trapped 174Yb+ ions. The successful round trip of the ion for 1920 μm is demonstrated using the developed approach.

Japanese Journal of Applied Physics•Jan 14, 2021•10 citations

Transport of ions in a segmented linear Paul trap in printed-circuit-board technology

G Huber, T. Deuschle, Wolfgang Schnitzler +3 more

We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.

New Journal of Physics•Jan 14, 2008•74 citations

Scaling Trapped Ion Quantum Computers Using Fast Gates and Microtraps

Alexander K. Ratcliffe, Richard L. Taylor, J. J. Hope +1 more

Most attempts to produce a scalable quantum information processing platform based on ion traps have focused on the shuttling of ions in segmented traps. We show that an architecture based on an array of microtraps with fast gates will outperform architectures based on ion shuttling. This system requires higher power lasers but does not require the manipulation of potentials or shuttling of ions. This improves optical access, reduces the complexity of the trap, and reduces the number of conductive surfaces close to the ions. The use of fast gates also removes limitations on the gate time. Error rates of 10^{-5} are shown to be possible with 250 mW laser power and a trap separation of 100 μm. The performance of the gates is shown to be robust to the limitations in the laser repetition rate and the presence of many ions in the trap array.

arXiv:1711.05875•Physical Review Letters•May 29, 2018•32 citations

Toward scalable ion traps for quantum information processing

Jason Amini, Hermann Uys, Janus H. Wesenberg +7 more

In this paper, we report the design, fabrication and preliminary testing of a 150 zone ion trap array built in a 'surface-electrode' geometry microfabricated on a single substrate. We demonstrate the transport of atomic ions between the legs of a 'Y'-type junction and measure the in-situ heating rates for the ions. The trap design demonstrates the use of a basic component design library that can be quickly assembled to form structures optimized for a particular experiment.

arXiv:0909.2464•New Journal of Physics•Mar 16, 2010•183 citations
We report on the design and testing of an array of Penning ion traps made from printed circuit board. The system enables fast shuttling of ions from one trapping zone to another, which could be of use in quantum information processing. We describe simulations carried out to determine the optimal potentials to be applied to the trap electrodes for enabling this movement. The results of a preliminary experiment with a cloud of laser cooled calcium ions demonstrate a round-trip shuttling efficiency of up to 75%.
The long term aim of this work is to study the suitability of using laser cooled Ca+ ions in Penning traps as the basic components of a quantum computer. A great deal of progress in the field of quantum computing has been made in recent years with laser cooled ions stored in radio frequency ion traps. Building a useful quantum computer with trapped ions is however extremely challenging. Penning traps offer some possible benefits over radio frequency traps. They also create some additional difficulties. The potential advantages and disadvantages of Penning traps are discussed throughout the thesis. We show that we are able to overcome the problems associated with laser cooling in Penning traps, and have trapped single ions for extended periods of time. Pairs of Ca+ ions have been aligned along the axis of a Penning trap, and have been optically resolved. A novel Penning trap array based on PCB boards has been developed. A prototype was built and tested, along with the electronics required to shuttle ions between different sub-traps. Ions have been shuttled a distance of 10 mm in 2.5 μs. A return trip efficiency of up to 75% was seen. A quantum effect – J-state mixing caused by large magnetic fields – has been observed for the first time in single atomic ions. The magnetic field causes a forbidden [Delta]J = 2 transition to become weakly allowed. This effect is of general interest in atomic physics, and is also very relevant for quantum computation studies. A quantitative prediction of the magnitude of the J-mixing effect has been derived theoretically. This is compared to experimental data, and is found to be in excellent qualitative and good quantitative agreement.
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 microns. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler cooled ion crystals of Ca-40 with this kind of traps. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2x2mm in a round-trip time of T=20us, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: For a slightly slower transport (a round-trip shuttle within T=30us) we observe non-adiabatic motional excitation of 0.89(15)meV.
Abstract A large-scale ion trap array fabricated using the microelectromechanical systems (MEMS) technology is expected to be a promising device for building a practical quantum computer. Shuttling trapped ions is essential for operating scalable ion trap structures. This paper proposes an ion shuttling method for a MEMS-fabricated surface ion trap. Change of secular frequency of trapping potential can cause heating and subsequent loss of ions. Therefore, direct current voltage sets to form uniform ion trapping potentials around the ions while shuttling are calculated by simulations. A 32-channel digital-to-analog converter system is developed to apply the calculated voltage sets to the electrodes of the MEMS-fabricated surface ion trap. The shuttling process is experimented using trapped 174Yb+ ions. The successful round trip of the ion for 1920 μm is demonstrated using the developed approach.
We describe the construction and operation of a segmented linear Paul trap, fabricated in printed-circuit-board technology with an electrode segment width of 500 μm. We prove the applicability of this technology to reliable ion trapping and report the observation of Doppler-cooled ion crystals of 40 Ca + with this kind of trap. Measured trap frequencies agree with numerical simulations at the level of a few percent from which we infer a high fabrication accuracy of the segmented trap. To demonstrate its usefulness and versatility for trapped ion experiments we study the fast transport of a single ion. Our experimental results show a success rate of 99.0(1)% for a transport distance of 2 × 2 mm in a round-trip time of T = 20 μs, which corresponds to 4 axial oscillations only. We theoretically and experimentally investigate the excitation of oscillations caused by fast ion transports with error-function voltage ramps: for a slightly slower transport (a round-trip shuttle within T = 30 μs) we observe non-adiabatic motional excitation of 0.89(15) meV.
Most attempts to produce a scalable quantum information processing platform based on ion traps have focused on the shuttling of ions in segmented traps. We show that an architecture based on an array of microtraps with fast gates will outperform architectures based on ion shuttling. This system requires higher power lasers but does not require the manipulation of potentials or shuttling of ions. This improves optical access, reduces the complexity of the trap, and reduces the number of conductive surfaces close to the ions. The use of fast gates also removes limitations on the gate time. Error rates of 10^{-5} are shown to be possible with 250 mW laser power and a trap separation of 100 μm. The performance of the gates is shown to be robust to the limitations in the laser repetition rate and the presence of many ions in the trap array.