Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0901.2455 · Physical Review B

Static properties of small Josephson tunnel junctions in an oblique magnetic field

R. Monaco, M. Aaroe, J. Mygind, V. P. Koshelets

Published Apr 22, 2009• 17 citations
arXivHTMLPDF

Abstract

We have carried out a detailed experimental investigation of the static properties of planar Josephson tunnel junctions in presence of a uniform external magnetic field applied in an arbitrary orientation with respect to the barrier plane. We considered annular junctions, as well as rectangular junctions (having both overlap and cross-type geometries) with different barrier aspect ratios. It is shown how most of the experimental findings in an oblique field can be reproduced invoking the superposition principle to combine the classical behavior of electrically small junctions in an in-plane field together with the small junction behavior in a transverse field that we recently published [R. Monaco et al., J. Appl. Phys. 104, 023906 (2008)]. We show that the presence of a transverse field may have important consequences, which could be either voluntarily exploited in applications or present an unwanted perturbation.

DOI
10.1103/physrevb.79.144521

Related papers

Planar Josephson tunnel junctions in a transverse magnetic field

R. Monaco, M. Aaroe, J. Mygind +1 more

Traditionally, since the discovery of the Josephson effect in 1962, the magnetic diffraction pattern of planar Josephson tunnel junctions has been recorded with the field applied in the plane of the junction. Here we discuss the static junction properties in a transverse magnetic field where demagnetization effects imposed by the tunnel barrier and electrodes geometry are important. Measurements of the junction critical current versus magnetic field in planar Nb-based high-quality junctions with different geometry, size, and critical current density show that it is advantageous to use a transverse magnetic field rather than an in-plane field. The conditions under which this occurs are discussed.

arXiv:0706.0700•Journal of Applied Physics•Nov 1, 2007•13 citations

Engineering double-well potentials with variable-width annular Josephson tunnel junctions

R. Monaco

Long Josephson tunnel junctions are non-linear transmission lines that allow propagation of current vortices (fluxons) and electromagnetic waves and are used in various applications within superconductive electronics. Recently, the Josephson vortex has been proposed as a new superconducting qubit. We describe a simple method to create a double-well potential for an individual fluxon trapped in a long elliptic annular Josephson tunnel junction characterized by an intrinsic non-uniform width. The distance between the potential wells and the height of the inter-well potential barrier are controlled by the strength of an in-plane magnetic field. The manipulation of the vortex states can be achieved by applying a proper current ramp across the junction. The read-out of the state is accomplished by measuring the vortex depinning current in a small magnetic field. An accurate one-dimensional sine-Gordon model for this strongly non-linear system is presented, from which we calculate the position-dependent fluxon rest-mass, its Hamiltonian density and the corresponding trajectories in the phase space. We examine the dependence of the potential properties on the annulus eccentricity and its electrical parameters and address the requirements for observing quantum-mechanical effects, as discrete energy levels and tunneling, in this two-state system.

arXiv:1606.02494•Journal of Physics Condensed Matter•Sep 8, 2016•15 citations

Suppression of the Josephson Current in Normal-Distribution-Shaped Tunnel Junctions

Katsuya Kikuchi, Hiroaki Myoren, Takeshi Iizuka +1 more

The magnetic field dependence of the Josephson current of a Josephson tunnel junction whose shape was a normal distribution is analyzed for superconducting tunnel junction (STJ) photon detector applications. It was found that the Josephson current of a normal distribution junction is very sensitive to the external magnetic field and follows a function of exp (-B 2), while a conventional rectangular STJ exhibits the well-known Fraunhofer pattern of sin x/x. Numerical calculations show that the Josephson current of the normal distribution junction can be suppressed by an external magnetic field that is one tenth of that needed for conventional rectangular junctions. Calculations of a normal distribution junction approximated with a 1 µm mesh also show that the Josephson current is sufficiently suppressed by a small magnetic field. The effect of the misalignment of the angle between the junction and the magnetic field was evaluated. It was found that for a normal-distribution-shaped junction, misalignment of the magnetic field is allowed within ± 5°, suppressing the Josephson effect by two orders of magnitude more than that of a rectangular junction.

Japanese Journal of Applied Physics•Oct 1, 2000•9 citations

Capacitance measurement of Josephson tunnel junctions with microwave-induced dc quasiparticle tunneling currents

K. Hamasaki, Keiji Yoshida, F. Irie +1 more

The microwave response of the dc quasiparticle tunneling current in Josephson tunnel junctions, where the Josephson current is suppressed by an external magnetic field, has been studied quantitatively in order to clarify its characteristics as a probe for the measurement of the junction capacitance. Extensive experiments for both small and long junctions are carried out for distinguishing between microwave behaviors of lumped and distributed constant junctions. It is shown that the observed voltage dependence of the dc quasiparticle tunneling current modified by an applied rf field is in good agreement with a theoretical result which takes into account the influence of the microwave circuit connected to the junction. The comparison between theory and experiment gives the magnitude of the internal rf field in the junction. Together with the applied rf field, this internal rf field leads to the junction rf impedance which is dominated by the junction capacitance in our experimental condition. In the case of lumped junctions, this experimental rf impedance is in reasonable agreement with the theoretical one with the junction capacitance estimated from the Fiske step of the distributed junction fabricated on the same substrate; the obtained ratio of the experimental impedance to the theoretical one is approximately 0.6–1.7. In the case of distributed junctions, however, experimental values of their characteristic impedances are approximately 0.2–0.3 of theoretical values calculated by assuming the one-dimensional junction model and taking account of the standing-wave effect in the junction.

Journal of Applied Physics•May 1, 1982•3 citations

Effects of junction geometry on performance of flux-flow type Josephson oscillator

Keiji Yoshida, Tadao Nagatsuma, K. Sueoka +2 more

Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.

IEEE Transactions on Magnetics•Mar 1, 1985•13 citations

Behavior of edge-grown low-capacitance superconducting tunnel junctions

G. Dousselin, Jorge Rosenblatt

By growing the oxide barrier on the edge of a thin film rather than on its flat surface, we have succeeded in obtaining small-area tunnel junctions. The fabrication process suitable for integration of many elements in small circuits is described. Supercurrent response to magnetic and microwave fields unambiguously characterize the Josephson behavior of these junctions.

Journal of Applied Physics•Jan 1, 1980•7 citations
We have carried out a detailed experimental investigation of the static properties of planar Josephson tunnel junctions in presence of a uniform external magnetic field applied in an arbitrary orientation with respect to the barrier plane. We considered annular junctions, as well as rectangular junctions (having both overlap and cross-type geometries) with different barrier aspect ratios. It is shown how most of the experimental findings in an oblique field can be reproduced invoking the superposition principle to combine the classical behavior of electrically small junctions in an in-plane field together with the small junction behavior in a transverse field that we recently published [R. Monaco et al., J. Appl. Phys. 104, 023906 (2008)]. We show that the presence of a transverse field may have important consequences, which could be either voluntarily exploited in applications or present an unwanted perturbation.
Traditionally, since the discovery of the Josephson effect in 1962, the magnetic diffraction pattern of planar Josephson tunnel junctions has been recorded with the field applied in the plane of the junction. Here we discuss the static junction properties in a transverse magnetic field where demagnetization effects imposed by the tunnel barrier and electrodes geometry are important. Measurements of the junction critical current versus magnetic field in planar Nb-based high-quality junctions with different geometry, size, and critical current density show that it is advantageous to use a transverse magnetic field rather than an in-plane field. The conditions under which this occurs are discussed.
Long Josephson tunnel junctions are non-linear transmission lines that allow propagation of current vortices (fluxons) and electromagnetic waves and are used in various applications within superconductive electronics. Recently, the Josephson vortex has been proposed as a new superconducting qubit. We describe a simple method to create a double-well potential for an individual fluxon trapped in a long elliptic annular Josephson tunnel junction characterized by an intrinsic non-uniform width. The distance between the potential wells and the height of the inter-well potential barrier are controlled by the strength of an in-plane magnetic field. The manipulation of the vortex states can be achieved by applying a proper current ramp across the junction. The read-out of the state is accomplished by measuring the vortex depinning current in a small magnetic field. An accurate one-dimensional sine-Gordon model for this strongly non-linear system is presented, from which we calculate the position-dependent fluxon rest-mass, its Hamiltonian density and the corresponding trajectories in the phase space. We examine the dependence of the potential properties on the annulus eccentricity and its electrical parameters and address the requirements for observing quantum-mechanical effects, as discrete energy levels and tunneling, in this two-state system.
The magnetic field dependence of the Josephson current of a Josephson tunnel junction whose shape was a normal distribution is analyzed for superconducting tunnel junction (STJ) photon detector applications. It was found that the Josephson current of a normal distribution junction is very sensitive to the external magnetic field and follows a function of exp (-B 2), while a conventional rectangular STJ exhibits the well-known Fraunhofer pattern of sin x/x. Numerical calculations show that the Josephson current of the normal distribution junction can be suppressed by an external magnetic field that is one tenth of that needed for conventional rectangular junctions. Calculations of a normal distribution junction approximated with a 1 µm mesh also show that the Josephson current is sufficiently suppressed by a small magnetic field. The effect of the misalignment of the angle between the junction and the magnetic field was evaluated. It was found that for a normal-distribution-shaped junction, misalignment of the magnetic field is allowed within ± 5°, suppressing the Josephson effect by two orders of magnitude more than that of a rectangular junction.
The microwave response of the dc quasiparticle tunneling current in Josephson tunnel junctions, where the Josephson current is suppressed by an external magnetic field, has been studied quantitatively in order to clarify its characteristics as a probe for the measurement of the junction capacitance. Extensive experiments for both small and long junctions are carried out for distinguishing between microwave behaviors of lumped and distributed constant junctions. It is shown that the observed voltage dependence of the dc quasiparticle tunneling current modified by an applied rf field is in good agreement with a theoretical result which takes into account the influence of the microwave circuit connected to the junction. The comparison between theory and experiment gives the magnitude of the internal rf field in the junction. Together with the applied rf field, this internal rf field leads to the junction rf impedance which is dominated by the junction capacitance in our experimental condition. In the case of lumped junctions, this experimental rf impedance is in reasonable agreement with the theoretical one with the junction capacitance estimated from the Fiske step of the distributed junction fabricated on the same substrate; the obtained ratio of the experimental impedance to the theoretical one is approximately 0.6–1.7. In the case of distributed junctions, however, experimental values of their characteristic impedances are approximately 0.2–0.3 of theoretical values calculated by assuming the one-dimensional junction model and taking account of the standing-wave effect in the junction.
Theoretical and experimental studies have been made of the effects of junction geometry on the performance of the flux-flow type Josephson oscillator. It is shown theoretically that the height and the slope of the current steps appearing in dc I-V curves of the junction, which determine the available power and the radiation linewidth of the oscillator, respectively, are dependent strongly upon self fields in the junction. In order to study the effects of junction geometries on the self fields, computer simulation and experiments have been carries out for an in-line junction, an overlap junction and an overlap junction with a small projection on one side. The best performance is obtained for the overlap junction with a moderate projection on side as expected theoretically.