Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0808.1979 · Bulletin of the American Physical Society

Graphene Josephson Qubit

Colin Benjamin, Jiannis K. Pachos

Published Aug 14, 2008• 0 citations
arXivHTMLPDF

Abstract

We propose to combine the advantages of graphene, such as easy tunability and long coherence times, with Josephson physics to manufacture qubits. If these qubits are built around a 0 and $\pi$ junction they can be controlled by an external flux. Alternatively, a d-wave Josephson junction can itself be tuned via a gate voltage to create superpositions between macroscopically degenerate states. We show that ferromagnets are not required for realizing $\pi$ junction in graphene, thus considerably simplifying its physical implementation. We demonstrate how one qubit gates, such as arbitrary phase rotations and the exchange gate, can be implemented.

Related papers

Engineering Superconducting Phase Qubits

G. Blatter, V. B. Geshkenbeǐn, L. B. Ioffe

The superconducting phase qubit combines Josephson junctions into superconducting loops and defines one of the promising solid state device implementations for quantum computing. While conventional designs are based on magnetically frustrated superconducting loops, here we discuss the advantages offered by $π$-junctions in obtaining naturally degenerate two-level systems. Starting from a basic five-junction loop, we show how to construct degenerate two-level junctions and superconducting phase switches. These elements are then effectively engineered into a superconducting phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting phase qubits can be understood as the macroscopic analogue of the `quiet' s-wave-d-wave-s-wave Josephson junction qubits introduced by Ioffe {\it et al.} [Nature {\bf 398}, 679 (1999)].

arXiv:cond-mat/9912163•Dec 9, 1999•6 citations

Design aspects of superconducting-phase quantum bits

G. Blatter, V. B. Geshkenbeǐn, L. B. Ioffe

A superconducting-phase quantum bit (qubit) involves three or more Josephson junctions combined into a superconducting loop and defines one of the promising solid-state device implementations for quantum computing. Recently, so called $\ensuremath{\pi}$ junctions, Josephson junctions with a ground state characterized by a \ensuremath{\pi}-phase shift across, have attracted much attention. We show how to make use of such $\ensuremath{\pi}$ junctions in the construction of superconducting phase qubits and discuss the advantage over conventional designs based on magnetically frustrated loops. Starting from a basic five-junction loop with one $\ensuremath{\pi}$ junction, we show how to construct effective junctions with degenerate minima characterized by phase shifts 0 and $\ensuremath{\pi}$ and superconducting-phase switches. These elements are then combined into a superconducting-phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting-phase qubits can be understood as the macroscopic analog of the ``quiet'' s-wave--d-wave--s-wave Josephson-junction qubits introduced by Ioffe et al. [Nature (London) 398, 679 (1999)].

Physical review. B, Condensed matter•Apr 11, 2001•181 citations

Gate-Tunable Spectrum and Charge Dispersion Mitigation in a Graphene Superconducting Qubit

Nicolás Aparicio, Simon Messelot, Edgar Bonet +5 more

Controlling the energy spectrum of quantum-coherent superconducting circuits, i.e., the energies of excited states, the circuit anharmonicity, and the states' charge dispersion, is essential for designing performant qubits. This control is usually achieved by adjusting the circuit's geometry. In situ control is traditionally obtained via an external magnetic field, in the case of tunnel Josephson junctions. More recently, semiconductor-weak-links-based Josephson junctions have emerged as an alternative building block with the advantage of tunability via the electric-field effect. Gate-tunable Josephson junctions have been succesfully integrated in superconducting circuits using, for instance, semiconducting nanowires or two-dimensional electron gases. In this Letter we demonstrate, in a graphene superconducting circuit, a large gate tunability of qubit properties: frequency, anharmonicity, and charge dispersion. We rationalize these features using a model considering the transmission of Cooper pairs through Andreev bound states. Noticeably, we show that the high transmission of Cooper pairs in such weak link strongly suppresses the charge dispersion. Our Letter illustrates the potential for graphene-based qubits as versatile building blocks in advanced quantum circuits.

arXiv:2506.04959•Physical Review Letters•Nov 20, 2025•2 citations

Strain designed Josephson π -junction qubits with topological insulators

Colin Benjamin

A Josephson qubit is designed via the application of a tensile strain to a topological insulator surface sandwiched between two s -wave superconductors. The strain applied leads to a shift in the Dirac point without changing the pre-existing conducting states, on the surface of a topological insulator. The strain applied can be tuned to form a π -junction in such a structure. Combining two such junctions in a ring architecture leads to the ground state of the ring being in a doubly degenerate state —the "0" and "1" states of a qubit. A qubit designed this way is quite easily controlled via the tunable strain applied. We report on the conditions necessary to design such a qubit. Finally the operating time of a single-qubit phase gate is derived.

arXiv:1408.3574•Europhysics Letters (EPL)•Jun 1, 2015•7 citations

Valley-polarized Josephson junctions as gate-tunable 0-π qubit platforms

Yuxuan Deng, Zhong C. F. Li, Zi-Ting Sun +2 more

Abstract Recently, gate-defined Josephson junctions based on magic-angle twisted bilayer graphene (MATBG) have been fabricated. In such a junction, local electrostatic gating can create two superconducting regions connected by an interaction-driven valley-polarized state as the weak link. Due to the spontaneous time-reversal and inversion symmetry breaking, novel phenomena such as the Josephson diode effect have been observed with zero external magnetic fields. Importantly, when the so-called nonreciprocity efficiency (which measures the sign and strength of the Josephson diode effect) changes sign, the energy-phase relation of the junction is approximately $F(\phi ) \propto \cos (2\phi )$ F ( ϕ ) ∝ cos ( 2 ϕ ) where F is the free energy and ϕ is the phase difference of the two superconductors. In this work, we show that such a MATBG-based Josephson junction, when shunted by a capacitor, can be used to realize the long-sought-after 0- π qubits which are protected from local perturbation-induced decoherence. Interestingly, by changing the junction parameters to the regime where a large nonreciprocity efficiency is obtainable, transmon-like qubits with large anharmonicity can also be realized. The gate-defined Josephson junctions can be employed as platforms for realizing qubits that are protected from local perturbations.

Quantum Frontiers•Feb 25, 2026•1 citation

Quantum-state engineering with Josephson-junction devices

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Quantum-state engineering, i.e., active control over the coherent dynamics of suitable quantum-mechanical systems, has become a fascinating prospect of modern physics. With concepts developed in atomic and molecular physics and in the context of NMR, the field has been stimulated further by the perspectives of quantum computation and communication. Low-capacitance Josephson tunneling junctions offer a promising way to realize quantum bits (qubits) for quantum information processing. The article reviews the properties of these devices and the practical and fundamental obstacles to their use. Two kinds of device have been proposed, based on either charge or phase (flux) degrees of freedom. Single- and two-qubit quantum manipulations can be controlled by gate voltages in one case and by magnetic fields in the other case. Both kinds of device can be fabricated with present technology. In flux qubit devices, an important milestone, the observation of superpositions of different flux states in the system eigenstates, has been achieved. The Josephson charge qubit has even demonstrated coherent superpositions of states readable in the time domain. There are two major problems that must be solved before these devices can be used for quantum information processing. One must have a long phase coherence time, which requires that external sources of dephasing be minimized. The review discusses relevant parameters and provides estimates of the decoherence time. Another problem is in the readout of the final state of the system. This issue is illustrated with a possible realization by a single-electron transistor capacitively coupled to the Josephson device, but general properties of measuring devices are also discussed. Finally, the review describes how the basic physical manipulations on an ideal device can be combined to perform useful operations.

arXiv:cond-mat/0011269•Reviews of Modern Physics•May 8, 2001•2,508 citations
We propose to combine the advantages of graphene, such as easy tunability and long coherence times, with Josephson physics to manufacture qubits. If these qubits are built around a 0 and π\piπ junction they can be controlled by an external flux. Alternatively, a d-wave Josephson junction can itself be tuned via a gate voltage to create superpositions between macroscopically degenerate states. We show that ferromagnets are not required for realizing π\piπ junction in graphene, thus considerably simplifying its physical implementation. We demonstrate how one qubit gates, such as arbitrary phase rotations and the exchange gate, can be implemented.
The superconducting phase qubit combines Josephson junctions into superconducting loops and defines one of the promising solid state device implementations for quantum computing. While conventional designs are based on magnetically frustrated superconducting loops, here we discuss the advantages offered by πππ-junctions in obtaining naturally degenerate two-level systems. Starting from a basic five-junction loop, we show how to construct degenerate two-level junctions and superconducting phase switches. These elements are then effectively engineered into a superconducting phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting phase qubits can be understood as the macroscopic analogue of the `quiet' s-wave-d-wave-s-wave Josephson junction qubits introduced by Ioffe {\it et al.} [Nature {\bf 398}, 679 (1999)].
A superconducting-phase quantum bit (qubit) involves three or more Josephson junctions combined into a superconducting loop and defines one of the promising solid-state device implementations for quantum computing. Recently, so called $\ensuremath{\pi}$ junctions, Josephson junctions with a ground state characterized by a \ensuremath{\pi}-phase shift across, have attracted much attention. We show how to make use of such $\ensuremath{\pi}$ junctions in the construction of superconducting phase qubits and discuss the advantage over conventional designs based on magnetically frustrated loops. Starting from a basic five-junction loop with one $\ensuremath{\pi}$ junction, we show how to construct effective junctions with degenerate minima characterized by phase shifts 0 and $\ensuremath{\pi}$ and superconducting-phase switches. These elements are then combined into a superconducting-phase qubit which operates exclusively with switches, thus avoiding permanent contact with the environment through external biasing. The resulting superconducting-phase qubits can be understood as the macroscopic analog of the ``quiet'' s-wave--d-wave--s-wave Josephson-junction qubits introduced by Ioffe et al. [Nature (London) 398, 679 (1999)].
Controlling the energy spectrum of quantum-coherent superconducting circuits, i.e., the energies of excited states, the circuit anharmonicity, and the states' charge dispersion, is essential for designing performant qubits. This control is usually achieved by adjusting the circuit's geometry. In situ control is traditionally obtained via an external magnetic field, in the case of tunnel Josephson junctions. More recently, semiconductor-weak-links-based Josephson junctions have emerged as an alternative building block with the advantage of tunability via the electric-field effect. Gate-tunable Josephson junctions have been succesfully integrated in superconducting circuits using, for instance, semiconducting nanowires or two-dimensional electron gases. In this Letter we demonstrate, in a graphene superconducting circuit, a large gate tunability of qubit properties: frequency, anharmonicity, and charge dispersion. We rationalize these features using a model considering the transmission of Cooper pairs through Andreev bound states. Noticeably, we show that the high transmission of Cooper pairs in such weak link strongly suppresses the charge dispersion. Our Letter illustrates the potential for graphene-based qubits as versatile building blocks in advanced quantum circuits.
A Josephson qubit is designed via the application of a tensile strain to a topological insulator surface sandwiched between two s -wave superconductors. The strain applied leads to a shift in the Dirac point without changing the pre-existing conducting states, on the surface of a topological insulator. The strain applied can be tuned to form a π -junction in such a structure. Combining two such junctions in a ring architecture leads to the ground state of the ring being in a doubly degenerate state —the "0" and "1" states of a qubit. A qubit designed this way is quite easily controlled via the tunable strain applied. We report on the conditions necessary to design such a qubit. Finally the operating time of a single-qubit phase gate is derived.
Abstract Recently, gate-defined Josephson junctions based on magic-angle twisted bilayer graphene (MATBG) have been fabricated. In such a junction, local electrostatic gating can create two superconducting regions connected by an interaction-driven valley-polarized state as the weak link. Due to the spontaneous time-reversal and inversion symmetry breaking, novel phenomena such as the Josephson diode effect have been observed with zero external magnetic fields. Importantly, when the so-called nonreciprocity efficiency (which measures the sign and strength of the Josephson diode effect) changes sign, the energy-phase relation of the junction is approximately F(ϕ)∝cos⁡(2ϕ)F(\phi ) \propto \cos (2\phi )F(ϕ)∝cos(2ϕ) F ( ϕ ) ∝ cos ( 2 ϕ ) where F is the free energy and ϕ is the phase difference of the two superconductors. In this work, we show that such a MATBG-based Josephson junction, when shunted by a capacitor, can be used to realize the long-sought-after 0- π qubits which are protected from local perturbation-induced decoherence. Interestingly, by changing the junction parameters to the regime where a large nonreciprocity efficiency is obtainable, transmon-like qubits with large anharmonicity can also be realized. The gate-defined Josephson junctions can be employed as platforms for realizing qubits that are protected from local perturbations.
Quantum-state engineering, i.e., active control over the coherent dynamics of suitable quantum-mechanical systems, has become a fascinating prospect of modern physics. With concepts developed in atomic and molecular physics and in the context of NMR, the field has been stimulated further by the perspectives of quantum computation and communication. Low-capacitance Josephson tunneling junctions offer a promising way to realize quantum bits (qubits) for quantum information processing. The article reviews the properties of these devices and the practical and fundamental obstacles to their use. Two kinds of device have been proposed, based on either charge or phase (flux) degrees of freedom. Single- and two-qubit quantum manipulations can be controlled by gate voltages in one case and by magnetic fields in the other case. Both kinds of device can be fabricated with present technology. In flux qubit devices, an important milestone, the observation of superpositions of different flux states in the system eigenstates, has been achieved. The Josephson charge qubit has even demonstrated coherent superpositions of states readable in the time domain. There are two major problems that must be solved before these devices can be used for quantum information processing. One must have a long phase coherence time, which requires that external sources of dephasing be minimized. The review discusses relevant parameters and provides estimates of the decoherence time. Another problem is in the readout of the final state of the system. This issue is illustrated with a possible realization by a single-electron transistor capacitively coupled to the Josephson device, but general properties of measuring devices are also discussed. Finally, the review describes how the basic physical manipulations on an ideal device can be combined to perform useful operations.