Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0806.1794 · Applied Physics Letters

Frequency stabilization of an ultraviolet laser to ions in a discharge

Erik W. Streed, Till J. Weinhold, D. Kielpinski

Published Aug 18, 2008• 22 citations
arXivHTMLPDF

Abstract

We stabilize an ultraviolet diode laser system at 369.5 nm to the optical absorption signal from Yb+ ions in a hollow-cathode discharge lamp. The error signal for stabilization is obtained by Zeeman spectroscopy of the 3 GHz wide absorption feature. The frequency stability is independently measured by comparison to the fluorescence signal from a laser-cooled crystal of Y174b+ ions in a linear Paul trap. We measure a frequency fluctuation of 1.7 MHz over 1000 s and a frequency drift of 20 MHz over 7 days. Our method is suitable for use in quantum information processing experiments with trapped ion crystals.

DOI
10.1063/1.2973401

Related papers

Frequency stabilization of a 369 nm diode laser by nonlinear spectroscopy of Ytterbium ions in a discharge

Michael W. Lee, Marie Claire Jarratt, Christian D. Marciniak +1 more

We demonstrate stabilization of an ultraviolet diode laser via Doppler-free spectroscopy of Ytterbium ions in a discharge. Our technique employs polarization spectroscopy, which produces a natural dispersive lineshape whose zero-crossing is largely immune to environmental drifts, making this signal an ideal absolute frequency reference for Yb+ ion trapping experiments. We stabilize an external-cavity diode laser near 369 nm for cooling Yb+ ions, using amplitude modulated polarization spectroscopy and a commercial PID feedback system. We achieve stable, low-drift locking with a standard deviation of measured laser frequency ∼ 400 kHz over 10 minutes, limited by the instantaneous linewidth of the diode laser. These results and the simplicity of our optical setup makes our approach attractive for stabilization of laser sources in atomic physics applications.

arXiv:1402.1248•Optics Express•Mar 19, 2014•18 citations

Frequency stabilization of a 399-nm laser by modulation transfer spectroscopy in an ytterbium hollow cathode lamp

Wenli Wang, Jie Ye, Hailing Jiang +3 more

The modulation transfer spectroscopy in an ytterbium hollow cathode lamp at 399 nm is measured. The error signal for frequency locking is optimized by measuring the dependences of its slope, linewidth and magnitude on various parameters. Under the optimum condition, the laser frequency at 399 nm can be stabilized. The long-term stability of laser frequency is measured by monitoring the fluorescence signal of the ytterbium atomic beam induced by the locked laser. The laser frequency is shown to be tightly locked, and the stabilized laser is successfully applied to the cooling of ytterbium atoms.

Chinese Physics B•Jan 1, 2011•12 citations

Coupled optical resonance laser locking

S. C. Burd, Pieter du Toit, Hermann Uys

We have demonstrated simultaneous laser frequency stabilization of a UV and IR laser, to coupled transitions of ions in the same spectroscopic sample, by detecting only the absorption of the UV laser. Separate signals for locking the different lasers are obtained by modulating each laser at a different frequency and using lock-in detection of a single photodiode signal. Experimentally, we simultaneously lock a 369 nm and a 935 nm laser to the (2)S(1/2) → (2)(P(1/2) and (2)D(3/2) → (3)D([3/2]1/2) transitions, respectively, of Yb(+) ions generated in a hollow cathode discharge lamp. Stabilized lasers at these frequencies are required for cooling and trapping Yb(+) ions, used in quantum information and in high precision metrology experiments. This technique should be readily applicable to other ion and neutral atom systems requiring multiple stabilized lasers.

arXiv:1307.2479•Optics Express•Oct 7, 2014•4 citations

Laser stabilisation to neutral Yb in a discharge with polarization enhanced frequency modulation spectroscopy

Valdis Blūms, Jordan Scarabel, Kenji Shimizu +8 more

Isotope selective optical excitation of atoms is important for experiments with neutral atoms, metrology, and work with trapped ions, including quantum information processing. Polarization-enhanced absorption spectroscopy is used to frequency stabilise a tunable external cavity laser diode system at 398.9 nm for isotope selective photoionization of neutral Yb atoms. This spectroscopy technique is used to measure isotope resolved dispersive features from transitions within a see through configuration Ytterbium hollow-cathode discharge lamp. This Doppler-free dichroic polarization spectroscopy is realised by retro-reflecting a laser beam through the discharge and analysing the polarization dependent absorption with balanced detection. The spectroscopy signal is recovered using lock-in detection of frequency modulation induced by current modulation of the external cavity laser diode. Here, we show the use of polarization-enhanced absorption spectroscopy for isotope selectively loading of $^{171}$Yb$^+$, $^{172}$Yb$^+$, or $^{174}$Yb$^+$ ions into an RF Paul trap.

arXiv:2006.12012•Jun 22, 2020•0 citations

High-performance frequency stabilization of ultraviolet diode lasers by using dichroic atomic vapor spectroscopy and transfer cavity*

Danna Shen, Liangyu Ding, Qiuxin Zhang +4 more

We develop a high-performance ultraviolet (UV) frequency stabilization technique implemented directly on UV diode lasers by combining the dichroic atomic vapor laser lock and the resonant transfer cavity lock. As an example, we demonstrate a stable locking with measured frequency standard deviations of approximately 200 kHz and 300 kHz for 399 nm and 370 nm diode lasers in 20 min. We achieve a long-term frequency drift of no more than 1 MHz for the target 370 nm laser within an hour, which is further verified with fluorescence count rates of a single trapped 171Yb+ ion. We also find strong linear correlations between lock points and environmental factors such as temperature and atmospheric pressure. Our approach provides a simple and stable solution at a relatively low cost, and features flexible control, high feedback bandwidth and minimal power consumption of the target UV laser.

arXiv:2004.03897•Chinese Physics B•Apr 23, 2020•6 citations

Dual Laser Frequency Stabilization for a Yb+ Single Ion Trap

Josipa Madunic, Alan Boudrias, Moustafa Abdel Hafiz +2 more

We present the frequency stabilization of 370 nm and 935 nm lasers using a coupled optical resonance method with a hollow cathode lamp. This method achieves a fractional frequency instability below 5×10−10at 1 second for both lasers, which is essential for efficient ion cooling and manipulation.

European Frequency and Time Forum•Jun 25, 2024•0 citations
We stabilize an ultraviolet diode laser system at 369.5 nm to the optical absorption signal from Yb+ ions in a hollow-cathode discharge lamp. The error signal for stabilization is obtained by Zeeman spectroscopy of the 3 GHz wide absorption feature. The frequency stability is independently measured by comparison to the fluorescence signal from a laser-cooled crystal of Y174b+ ions in a linear Paul trap. We measure a frequency fluctuation of 1.7 MHz over 1000 s and a frequency drift of 20 MHz over 7 days. Our method is suitable for use in quantum information processing experiments with trapped ion crystals.
We demonstrate stabilization of an ultraviolet diode laser via Doppler-free spectroscopy of Ytterbium ions in a discharge. Our technique employs polarization spectroscopy, which produces a natural dispersive lineshape whose zero-crossing is largely immune to environmental drifts, making this signal an ideal absolute frequency reference for Yb+ ion trapping experiments. We stabilize an external-cavity diode laser near 369 nm for cooling Yb+ ions, using amplitude modulated polarization spectroscopy and a commercial PID feedback system. We achieve stable, low-drift locking with a standard deviation of measured laser frequency ∼ 400 kHz over 10 minutes, limited by the instantaneous linewidth of the diode laser. These results and the simplicity of our optical setup makes our approach attractive for stabilization of laser sources in atomic physics applications.
The modulation transfer spectroscopy in an ytterbium hollow cathode lamp at 399 nm is measured. The error signal for frequency locking is optimized by measuring the dependences of its slope, linewidth and magnitude on various parameters. Under the optimum condition, the laser frequency at 399 nm can be stabilized. The long-term stability of laser frequency is measured by monitoring the fluorescence signal of the ytterbium atomic beam induced by the locked laser. The laser frequency is shown to be tightly locked, and the stabilized laser is successfully applied to the cooling of ytterbium atoms.
We have demonstrated simultaneous laser frequency stabilization of a UV and IR laser, to coupled transitions of ions in the same spectroscopic sample, by detecting only the absorption of the UV laser. Separate signals for locking the different lasers are obtained by modulating each laser at a different frequency and using lock-in detection of a single photodiode signal. Experimentally, we simultaneously lock a 369 nm and a 935 nm laser to the (2)S(1/2) → (2)(P(1/2) and (2)D(3/2) → (3)D([3/2]1/2) transitions, respectively, of Yb(+) ions generated in a hollow cathode discharge lamp. Stabilized lasers at these frequencies are required for cooling and trapping Yb(+) ions, used in quantum information and in high precision metrology experiments. This technique should be readily applicable to other ion and neutral atom systems requiring multiple stabilized lasers.
Isotope selective optical excitation of atoms is important for experiments with neutral atoms, metrology, and work with trapped ions, including quantum information processing. Polarization-enhanced absorption spectroscopy is used to frequency stabilise a tunable external cavity laser diode system at 398.9 nm for isotope selective photoionization of neutral Yb atoms. This spectroscopy technique is used to measure isotope resolved dispersive features from transitions within a see through configuration Ytterbium hollow-cathode discharge lamp. This Doppler-free dichroic polarization spectroscopy is realised by retro-reflecting a laser beam through the discharge and analysing the polarization dependent absorption with balanced detection. The spectroscopy signal is recovered using lock-in detection of frequency modulation induced by current modulation of the external cavity laser diode. Here, we show the use of polarization-enhanced absorption spectroscopy for isotope selectively loading of 171^{171}171Yb+^++, 172^{172}172Yb+^++, or 174^{174}174Yb+^++ ions into an RF Paul trap.
We develop a high-performance ultraviolet (UV) frequency stabilization technique implemented directly on UV diode lasers by combining the dichroic atomic vapor laser lock and the resonant transfer cavity lock. As an example, we demonstrate a stable locking with measured frequency standard deviations of approximately 200 kHz and 300 kHz for 399 nm and 370 nm diode lasers in 20 min. We achieve a long-term frequency drift of no more than 1 MHz for the target 370 nm laser within an hour, which is further verified with fluorescence count rates of a single trapped 171Yb+ ion. We also find strong linear correlations between lock points and environmental factors such as temperature and atmospheric pressure. Our approach provides a simple and stable solution at a relatively low cost, and features flexible control, high feedback bandwidth and minimal power consumption of the target UV laser.