We demonstrate new experimental procedures for measuring small errors in a superconducting quantum bit (qubit). By carefully separating out gate and measurement errors, we construct a complete error budget and demonstrate single qubit gate fidelities of 0.98, limited by energy relaxation. We also introduce a new metrology tool-- Ramsey interference error filter-that can measure the occupation probability of the state |2> which is outside the computational basis, down to 10{-4}, thereby confirming that our quantum system stays within the qubit manifold during single qubit logic operations.
We demonstrate new experimental procedures for measuring small errors in a superconducting quantum bit (qubit). By carefully separating out gate and measurement errors, we construct a complete error budget and demonstrate single qubit gate fidelities of 0.98, limited by energy relaxation. We also introduce a new metrology tool-- Ramsey interference error filter-that can measure the occupation probability of the state |2> which is outside the computational basis, down to 10{-4}, thereby confirming that our quantum system stays within the qubit manifold during single qubit logic operations.
Quantum computers have the potential to solve problems which are classically intractable. Superconducting qubits present a promising path to building such a computer. Recent experiments with these qubits have demonstrated the principles of quantum error correction, quantum simulation, quantum annealing, and more. Current research with superconducting qubits is focused on two primary goals: creating a fully fault tolerant logical qubit out of many physical qubits using surface code error correction, and demonstrating an exponential speedup over any classical computer for a well-defined computational problem. To achieve either of these goals requires high precision control of three components: single qubit gates, two qubit gates, and qubit measurement. In this thesis, we use randomized benchmarking to characterize single qubit gates with 99.95\\% fidelity and two qubit gates wiht 99.5\\% fidelity in superconducting transmon qubits. In addition, we use standard decoherence measurements as well as newly developed extensions of randomized benchmarking to determine the limiting sources of error. Finally, we explore the surprisingly complicated dynamics of measuring the transmon state through a coupled resonator, and show that fully understanding this process requires breaking a few "standard" assumptions.
One of the largest obstacles to building a quantum computer is gate error, where the physical evolution of the state of a qubit or group of qubits during a gate operation does not match the intended unitary transformation. Gate error stems from a combination of control errors and random single qubit errors from interaction with the environment. While great strides have been made in mitigating control errors, intrinsic qubit error remains a serious problem that limits gate fidelity in modern qubit architectures. Simultaneously, recent developments of small error-corrected logical qubit devices promise significant increases in logical state lifetime, but translating those improvements into increases in gate fidelity is a complex challenge. In this Letter, we construct protocols for gates on and between small logical qubit devices which inherit the parent device's tolerance to single qubit errors which occur at any time before or during the gate. We consider two such devices, a passive implementation of the three-qubit bit flip code, and the author's own [E. Kapit, Phys. Rev. Lett. 116, 150501 (2016)PRLTAO0031-900710.1103/PhysRevLett.116.150501] very small logical qubit (VSLQ) design, and propose error-tolerant gate sets for both. The effective logical gate error rate in these models displays superlinear error reduction with linear increases in single qubit lifetime, proving that passive error correction is capable of increasing gate fidelity. Using a standard phenomenological noise model for superconducting qubits, we demonstrate a realistic, universal one- and two-qubit gate set for the VSLQ, with error rates an order of magnitude lower than those for same-duration operations on single qubits or pairs of qubits. These developments further suggest that incorporating small logical qubits into a measurement based code could substantially improve code performance.
Abstract Implementing arbitrary single-qubit gates with near perfect fidelity is among the most fundamental requirements in gate-based quantum information processing. In this work, we fabricate a transmon qubit with long coherence times and demonstrate single-qubit gates with the average gate error below 10 −4 , i.e. (7.42 ± 0.04) × 10 −5 by randomized benchmarking (RB). To understand the error sources, we experimentally obtain an error budget, consisting of the decoherence errors lower bounded by (4.62 ± 0.04) × 10 −5 and the leakage rate per gate of (1.16 ± 0.04) × 10 −5 . Moreover, we reconstruct the process matrices for the single-qubit gates by the gate set tomography (GST), with which we simulate RB sequences and obtain single-qubit fidelities consistent with experimental results. We also observe non-Markovian behavior in the experiment of long-sequence GST, which may provide guidance for further calibration. The demonstration extends the upper limit that the average fidelity of single-qubit gates can reach in a transmon-qubit system, and thus can be an essential step towards practical and reliable quantum computation in the near future.
Quantum error correction is an essential ingredient for universal quantum computing. Despite tremendous experimental efforts in the study of quantum error correction, to date, there has been no demonstration in the realisation of universal quantum error correction code (QECC), with the subsequent verification of all key features including the identification of an arbitrary physical error, the capability for transversal manipulation of the logical state, and state decoding. To address this notoriously difficult challenge, we push the limits of the depth of superconducting quantum circuits and experimentally realise the universal five-qubit QECC, the so-called smallest perfect code that permits corrections of generic single-qubit errors. In the experiment, having optimised the encoding circuit, we employ an array of superconducting qubits to realise the five-qubit QECC for several typical logical states including the magic state, an indispensable resource for realising non-Clifford gates. The encoded states are prepared with an average fidelity of 57.1(3)% while with a high fidelity of 98.6(1)% in the code space. Then, the arbitrary single-qubit errors introduced manually are identified by measuring the stabilizers. We further implement logical Pauli operations with a fidelity of 97.2(2)% within the code space. Finally, we realise the decoding circuit and recover the input state with a process fidelity of 57.4(7)%. After decoding, by identifying errors via the measurement of the four ancillae and then mathematically recovering the qubit state, we verify the power of error correction of this code. Thus, by demonstrating each key aspect of error correction with the five-qubit code, our work establishes the viability of experimental quantum error correction with superconducting qubits and paves the route to fault-tolerant quantum computing.
High-fidelity initialization, manipulation, and measurement of qubits are important in quantum computing. For the Google’s Sycamore processor, the gate fidelity of single- and two-qubit logic operations has improved to>99.6%, whereas single-shot measurement fidelity remains at the level of 97%, which severely limits the application of the superconducting approach to large-scale quantum computing. The current measurement scheme relies on the dispersive interaction between the qubit and the readout resonator, which was proposed back in 2004. However, the measurement fidelity is limited by the trade-off between the state separation and relaxation time of the two-level system. Recently, an exciting phenomenon was observed experimentally, wherein the separation-decay limit could be alleviated by exploiting the cascade decay nature of the higher levels; however, the mechanism and effectiveness of this phenomenon are still unclear. Herein, we present a theoretical tool to extract different types of errors in high-level states encoding dispersive measurement. For the realistic parameters of Google’s Sycamore processor, the use of state |2〉 is sufficient to suppress 92% of the decay readout error on average, where the total readout error is dominated by the background thermal excitation. We also show counter-intuitively that, the assistance of high-level states is effective in the measurement of logic 0, where there is no decay process.
Quantum error correction is an essential ingredient for universal quantum computing. Despite tremendous experimental efforts in the study of quantum error correction, to date, there has been no demonstration in the realisation of universal quantum error-correcting code, with the subsequent verification of all key features including the identification of an arbitrary physical error, the capability for transversal manipulation of the logical state and state decoding. To address this challenge, we experimentally realise the [5, 1, 3] code, the so-called smallest perfect code that permits corrections of generic single-qubit errors. In the experiment, having optimised the encoding circuit, we employ an array of superconducting qubits to realise the [5, 1, 3] code for several typical logical states including the magic state, an indispensable resource for realising non-Clifford gates. The encoded states are prepared with an average fidelity of [Formula: see text] while with a high fidelity of [Formula: see text] in the code space. Then, the arbitrary single-qubit errors introduced manually are identified by measuring the stabilisers. We further implement logical Pauli operations with a fidelity of [Formula: see text] within the code space. Finally, we realise the decoding circuit and recover the input state with an overall fidelity of [Formula: see text], in total with 92 gates. Our work demonstrates each key aspect of the [5, 1, 3] code and verifies the viability of experimental realisation of quantum error-correcting codes with superconducting qubits.