Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0706.2965 · Low Temperature Physics

The two-Josephson-junction flux qubit with large tunneling amplitude

V. I. Shnyrkov, A. A. Soroka, S. I. Melnyk

Published Aug 1, 2008• 5 citations
arXivHTMLPDF

Abstract

In this paper we discuss solid-state nanoelectronic realizations of Josephson flux qubits with large tunneling amplitude between the two macroscopic states. The latter can be controlled via the height and form of the potential barrier, which is determined by quantum-state engineering of the flux qubit circuit. The simplest circuit of the flux qubit is a superconducting loop interrupted by a Josephson nanoscale tunnel junction. The tunneling amplitude between two macroscopically different states can be increased substantially by engineering of the qubit circuit if the tunnel junction is replaced by a ScS contact. However, only Josephson tunnel junctions are particularly suitable for large-scale integration circuits and quantum detectors with present-day technology. To overcome this difficulty we consider here a flux qubit with high energy-level separation between the “ground” and “excited” states, consisting of a superconducting loop with two low-capacitance Josephson tunnel junctions in series. We demonstrate that for real parameters of resonant superposition between the two macroscopic states the tunneling amplitude can reach values greater than 1K. Analytical results for the tunneling amplitude obtained within the semiclassical approximation by the instanton technique show good correlation with a numerical solution.

DOI
10.1063/1.2967504

Related papers

The two Josephson junction flux qubit with large tunneling amplitude

V. I. Shnyrkov, A. A. Soroka, Sergiy Melnyk

In this paper we discuss solid-state nanoelectronic realizations of Josephson flux qubits with large tunneling \namplitude between the two macroscopic states. The latter can be controlled via the height and form of \nthe potential barrier, which is determined by quantum-state engineering of the flux qubit circuit. The simplest \ncircuit of the flux qubit is a superconducting loop interrupted by a Josephson nanoscale tunnel junction. \nThe tunneling amplitude between two macroscopically different states can be essentially increased, by \nengineering of the qubit circuit, if tunnel junction is replaced by a ScS contact. However, only Josephson \ntunnel junctions are particularly suitable for large-scale integration circuits and quantum detectors with preset- \nday technology. To overcome this difficulty we consider here the flux qubit with high-level energy separation \nbetween «ground» and «excited» states, which consists of a superconducting loop with two lowcapacitance \nJosephson tunnel junctions in series. We demonstrate that for real parameters of resonant superposition \nbetween the two macroscopic states the tunneling amplitude can reach values greater than 1 K. Analytical \nresults for the tunneling amplitude obtained within semiclassical approximation by instanton technique \nshow good correlation with a numerical solution.

•Jan 1, 2008•4 citations

Superposition of states in flux qubits with a Josephson junction of the ScS type (Review Article)

V. I. Shnyrkov, A. A. Soroka, A. M. Korolev +1 more

The consequences of the transition to a quantum description of magnetic flux motion in the superconducting ring closed by an ScS type Josephson junction are considered. Here we review the principal results regarding macroscopic quantum tunneling (MQT) of Bose condensate consisting of a macroscopically large number of Cooper electron pairs. These phenomena are illustrated by the original data obtained from the study of MQT and coherent states in a modified flux qubit with energy level depletion ΔE01 ≈ 2·10–23 J (ΔE01/h ≈ 30 GHz). State superposition properties in a two-well potential and the issues associated with quantum measurements of local curvature of qubits’ superposition energy levels are analyzed.

Low Temperature Physics•Apr 1, 2012•8 citations

Entanglement and Bell states in superconducting flux qubits

Mun Dae Kim, Sam Young Cho

We theoretically study macroscopic quantum entanglement in two superconducting flux qubits. To manipulate the state of two flux qubits, a Josephson junction is introduced in the connecting loop coupling the qubits. Increasing the coupling energy of the Josephson junction makes it possible to achieve relatively strong coupling between the qubits, causing two-qubit tunneling processes to be even dominant over the single-qubit tunneling processes in the states of two qubits. It is shown that due to the two-qubit tunneling processes, both the ground state and excited states of the coupled flux qubits can be a Bell type of maximally entangled state, in experimentally accessible regimes. The parameter regimes for the Bell states are discussed in terms of magnetic flux and Josephson coupling energies.

arXiv:cond-mat/0606034•Physical Review B•Apr 18, 2007•11 citations

Quantum detector based on a superposition of macroscopic states in a phase qubit

V. I. Shnyrkov, Сергей Иванович Мельник

A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.

Low Temperature Physics•Jan 1, 2007•10 citations

Macroscopic quantum superposition of current states in a Josephson-junction loop

Frank K. Wilhelm, Caspar H. van der Wal, A. C. J. ter Haar +5 more

Abstract. Superconducting circuits with Josephson tunnel junctions are interesting systems for research on quantummechanical behavior of macroscopic degrees of freedom. A particular realization is a small superconducting loop containing three Josephson junctions. Close to magnetic frustration 1=2, the physics of this system corresponds to a double well, whose minima correspond to persistent currents of opposite sign. We present DC measurements of the flux indicating a smooth transition close to the degeneracy point even at very low temperatures. Furthermore, microwavespectroscopy experiments allow for the excitation to the next excited state. The dependence of the energy of the resonance on the applied flux clearly indicates the nature of these states as tunneling-splitted superpositions of flux states. We theoretically analyze the system using a generalized master-equation formulation of the spin-boson model. We address the nature of the measuring process by a switching DC SQUID and the possible interpretation of the spectroscopy data in terms of quantum coherence. We discuss these aspects in the context of further applications as a quantum bit.

Physics-Uspekhi•Oct 1, 2001•4 citations

Quantum-state engineering with Josephson-junction devices

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Quantum-state engineering, i.e., active control over the coherent dynamics of suitable quantum-mechanical systems, has become a fascinating prospect of modern physics. With concepts developed in atomic and molecular physics and in the context of NMR, the field has been stimulated further by the perspectives of quantum computation and communication. Low-capacitance Josephson tunneling junctions offer a promising way to realize quantum bits (qubits) for quantum information processing. The article reviews the properties of these devices and the practical and fundamental obstacles to their use. Two kinds of device have been proposed, based on either charge or phase (flux) degrees of freedom. Single- and two-qubit quantum manipulations can be controlled by gate voltages in one case and by magnetic fields in the other case. Both kinds of device can be fabricated with present technology. In flux qubit devices, an important milestone, the observation of superpositions of different flux states in the system eigenstates, has been achieved. The Josephson charge qubit has even demonstrated coherent superpositions of states readable in the time domain. There are two major problems that must be solved before these devices can be used for quantum information processing. One must have a long phase coherence time, which requires that external sources of dephasing be minimized. The review discusses relevant parameters and provides estimates of the decoherence time. Another problem is in the readout of the final state of the system. This issue is illustrated with a possible realization by a single-electron transistor capacitively coupled to the Josephson device, but general properties of measuring devices are also discussed. Finally, the review describes how the basic physical manipulations on an ideal device can be combined to perform useful operations.

arXiv:cond-mat/0011269•Reviews of Modern Physics•May 8, 2001•2,508 citations
In this paper we discuss solid-state nanoelectronic realizations of Josephson flux qubits with large tunneling amplitude between the two macroscopic states. The latter can be controlled via the height and form of the potential barrier, which is determined by quantum-state engineering of the flux qubit circuit. The simplest circuit of the flux qubit is a superconducting loop interrupted by a Josephson nanoscale tunnel junction. The tunneling amplitude between two macroscopically different states can be increased substantially by engineering of the qubit circuit if the tunnel junction is replaced by a ScS contact. However, only Josephson tunnel junctions are particularly suitable for large-scale integration circuits and quantum detectors with present-day technology. To overcome this difficulty we consider here a flux qubit with high energy-level separation between the “ground” and “excited” states, consisting of a superconducting loop with two low-capacitance Josephson tunnel junctions in series. We demonstrate that for real parameters of resonant superposition between the two macroscopic states the tunneling amplitude can reach values greater than 1K. Analytical results for the tunneling amplitude obtained within the semiclassical approximation by the instanton technique show good correlation with a numerical solution.
In this paper we discuss solid-state nanoelectronic realizations of Josephson flux qubits with large tunneling \namplitude between the two macroscopic states. The latter can be controlled via the height and form of \nthe potential barrier, which is determined by quantum-state engineering of the flux qubit circuit. The simplest \ncircuit of the flux qubit is a superconducting loop interrupted by a Josephson nanoscale tunnel junction. \nThe tunneling amplitude between two macroscopically different states can be essentially increased, by \nengineering of the qubit circuit, if tunnel junction is replaced by a ScS contact. However, only Josephson \ntunnel junctions are particularly suitable for large-scale integration circuits and quantum detectors with preset- \nday technology. To overcome this difficulty we consider here the flux qubit with high-level energy separation \nbetween «ground» and «excited» states, which consists of a superconducting loop with two lowcapacitance \nJosephson tunnel junctions in series. We demonstrate that for real parameters of resonant superposition \nbetween the two macroscopic states the tunneling amplitude can reach values greater than 1 K. Analytical \nresults for the tunneling amplitude obtained within semiclassical approximation by instanton technique \nshow good correlation with a numerical solution.
The consequences of the transition to a quantum description of magnetic flux motion in the superconducting ring closed by an ScS type Josephson junction are considered. Here we review the principal results regarding macroscopic quantum tunneling (MQT) of Bose condensate consisting of a macroscopically large number of Cooper electron pairs. These phenomena are illustrated by the original data obtained from the study of MQT and coherent states in a modified flux qubit with energy level depletion ΔE01 ≈ 2·10–23 J (ΔE01/h ≈ 30 GHz). State superposition properties in a two-well potential and the issues associated with quantum measurements of local curvature of qubits’ superposition energy levels are analyzed.
We theoretically study macroscopic quantum entanglement in two superconducting flux qubits. To manipulate the state of two flux qubits, a Josephson junction is introduced in the connecting loop coupling the qubits. Increasing the coupling energy of the Josephson junction makes it possible to achieve relatively strong coupling between the qubits, causing two-qubit tunneling processes to be even dominant over the single-qubit tunneling processes in the states of two qubits. It is shown that due to the two-qubit tunneling processes, both the ground state and excited states of the coupled flux qubits can be a Bell type of maximally entangled state, in experimentally accessible regimes. The parameter regimes for the Bell states are discussed in terms of magnetic flux and Josephson coupling energies.
A quantum detector whose working principle is based on magnetic-field modulation of a circulating supercurrent in the quantum ground state of a macroscopic superconducting loop with a Josephson junction. Under the influence of an external magnetic flux equal to Φ0∕2 (or Φ0), two (or three) classical states are coupled to each other by quantum tunneling through a potential barrier, and therefore the detector is a two-level (or three-level) system. In the low-temperature region and under the condition of very weak damping, the mean value of the circulating supercurrent reflects the character of the variation of the quantum superposition of macroscopic states, which is sensitive to the symmetry of the potential. The variations of the current are amplified and detected in a measurement scheme similar to the signal registration in a nonhysteretic rf SQUID. It is shown by a numerical analysis that in comparison with a qubit detector based on an SIS junction, a detector with an ScS junction is faster and has much larger amplitudes of energy splitting at the same parameters. The results presented for double- and triple-well potentials clearly indicate that a qubit with an ScS junction can act as a detector with a sensitivity determined by the quantum noise of the amplifier.
Abstract. Superconducting circuits with Josephson tunnel junctions are interesting systems for research on quantummechanical behavior of macroscopic degrees of freedom. A particular realization is a small superconducting loop containing three Josephson junctions. Close to magnetic frustration 1=2, the physics of this system corresponds to a double well, whose minima correspond to persistent currents of opposite sign. We present DC measurements of the flux indicating a smooth transition close to the degeneracy point even at very low temperatures. Furthermore, microwavespectroscopy experiments allow for the excitation to the next excited state. The dependence of the energy of the resonance on the applied flux clearly indicates the nature of these states as tunneling-splitted superpositions of flux states. We theoretically analyze the system using a generalized master-equation formulation of the spin-boson model. We address the nature of the measuring process by a switching DC SQUID and the possible interpretation of the spectroscopy data in terms of quantum coherence. We discuss these aspects in the context of further applications as a quantum bit.
Quantum-state engineering, i.e., active control over the coherent dynamics of suitable quantum-mechanical systems, has become a fascinating prospect of modern physics. With concepts developed in atomic and molecular physics and in the context of NMR, the field has been stimulated further by the perspectives of quantum computation and communication. Low-capacitance Josephson tunneling junctions offer a promising way to realize quantum bits (qubits) for quantum information processing. The article reviews the properties of these devices and the practical and fundamental obstacles to their use. Two kinds of device have been proposed, based on either charge or phase (flux) degrees of freedom. Single- and two-qubit quantum manipulations can be controlled by gate voltages in one case and by magnetic fields in the other case. Both kinds of device can be fabricated with present technology. In flux qubit devices, an important milestone, the observation of superpositions of different flux states in the system eigenstates, has been achieved. The Josephson charge qubit has even demonstrated coherent superpositions of states readable in the time domain. There are two major problems that must be solved before these devices can be used for quantum information processing. One must have a long phase coherence time, which requires that external sources of dephasing be minimized. The review discusses relevant parameters and provides estimates of the decoherence time. Another problem is in the readout of the final state of the system. This issue is illustrated with a possible realization by a single-electron transistor capacitively coupled to the Josephson device, but general properties of measuring devices are also discussed. Finally, the review describes how the basic physical manipulations on an ideal device can be combined to perform useful operations.