An arbitrarily reliable quantum computer can be efficiently constructed from noisy components using a recursive simulation procedure, provided that those components fail with probability less than the fault-tolerance threshold. Recent estimates of the threshold are near some experimentally achieved gate fidelities. However, the landscape of threshold estimates includes pseudothresholds, threshold estimates based on a subset of components and a low level of the recursion. In this paper, we observe that pseudothresholds are a generic phenomenon in fault-tolerant computation. We define pseudothresholds and present classical and quantum fault-tolerant circuits exhibiting pseudothresholds that differ by a factor of $4$ from fault-tolerance thresholds for typical relationships between component failure rates. We develop tools for visualizing how reliability is influenced by recursive simulation in order to determine the asymptotic threshold. Finally, we conjecture that refinements of these methods may establish upper bounds on the fault-tolerance threshold for particular codes and noise models.
An arbitrarily reliable quantum computer can be efficiently constructed from noisy components using a recursive simulation procedure, provided that those components fail with probability less than the fault-tolerance threshold. Recent estimates of the threshold are near some experimentally achieved gate fidelities. However, the landscape of threshold estimates includes pseudothresholds, threshold estimates based on a subset of components and a low level of the recursion. In this paper, we observe that pseudothresholds are a generic phenomenon in fault-tolerant computation. We define pseudothresholds and present classical and quantum fault-tolerant circuits exhibiting pseudothresholds that differ by a factor of 4 from fault-tolerance thresholds for typical relationships between component failure rates. We develop tools for visualizing how reliability is influenced by recursive simulation in order to determine the asymptotic threshold. Finally, we conjecture that refinements of these methods may establish upper bounds on the fault-tolerance threshold for particular codes and noise models.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
With the intense interest in small, noisy quantum computing devices comes the push for larger, more accurate---and hence more useful---quantum computers. While fully fault-tolerant quantum computers are, in principle, capable of achieving arbitrarily accurate calculations using devices subjected to general noise, they require immense resources far beyond our current reach. An intermediate step would be to construct quantum computers of limited accuracy enhanced by lower-level, and hence lower-cost, noise-removal techniques. This is the motivation for our paper, which looks into fault-tolerant encoded quantum computation targeted at the dominant noise afflicting the quantum device. Specifically, we develop a protocol for fault-tolerant encoded quantum computing components in the presence of amplitude-damping noise, using a 4-qubit code and a recovery procedure tailored to such noise. We describe a universal set of fault-tolerant encoded gadgets and compute the pseudothreshold for the noise, below which our scheme leads to more accurate computation. Our paper demonstrates the possibility of applying the ideas of quantum fault tolerance to targeted noise models, generalizing the recent pursuit of biased-noise fault tolerance beyond the usual Pauli noise models. We also illustrate how certain aspects of the standard fault tolerance intuition, largely acquired through Pauli-noise considerations, can fail in the face of more general noise.
Designing encoding and decoding circuits to reliably send messages over many uses of a noisy channel is a central problem in communication theory. When studying the optimal transmission rates achievable with asymptotically vanishing error it is usually assumed that these circuits can be implemented using noise-free gates. While this assumption is satisfied for classical machines in many scenarios, it is not expected to be satisfied in the near term future for quantum machines where decoherence leads to faults in the quantum gates. As a result, fundamental questions regarding the practical relevance of quantum channel coding remain open. By combining techniques from fault-tolerant quantum computation with techniques from quantum communication, we initiate the study of these questions. We introduce fault-tolerant versions of quantum capacities quantifying the optimal communication rates achievable with asymptotically vanishing total error when the encoding and decoding circuits are affected by gate errors with small probability. Our main results are threshold theorems for the classical and quantum capacity: For every quantum channelTand everyϵ>0there exists a thresholdp(ϵ,T)for the gate error probability below which rates larger than$C-\epsilon arefault−tolerantlyachievablewithvanishingoverallcommunicationerror,whereC$denotes the usual capacity. Our results are not only relevant in communication over large distances, but also on-chip, where distant parts of a quantum computer might need to communicate under higher levels of noise than affecting the local gates.
Understanding the performance of realistic noisy encoded circuits is an important task for the development of large-scale practical quantum computers. Specifically, the development of proposals for quantum computation must be well informed by both the qualities of the low-level physical system of choice, and the properties of the high-level quantum error correction and fault-tolerance schemes. Gaining insight into how a particular computation will play out on a physical system is in general a difficult problem, as the classical simulation of arbitrary noisy quantum circuits is inefficient. Nevertheless, important classes of noisy circuits can be simulated efficiently. Such simulations have led to numerical estimates of threshold errors rates and resource estimates in topological codes subject to efficiently simulable error models. \n \nThis thesis describes and analyzes a method that my collaborators and I have introduced for leveraging efficient simulation techniques to understand the performance of large quantum processors that are subject to errors lying outside of the efficient simulation algorithm's applicability. The idea is to approximate an arbitrary gate error with an error from the efficiently simulable set in a way that ``honestly'' represents the original error's ability to preserve or distort quantum information. After introducing and analyzing the individual gate approximation method, its utility as a means for estimating circuit performance is studied. In particular, the method is tested within the use-case for which it was originally conceived; understanding the performance of a hypothetical physical implementation of a quantum error-correction protocol. It is found that the method performs exactly as desired in all cases. That is, the circuits composed of the approximated error models honestly represent the circuits composed of the errors derived from the physical models.
We prove a fault-tolerance theorem for quantum computation against adversarial noise. For every quantum circuit on Nˉ logical qudits of depth Tˉ, we construct a fault-tolerant circuit on N=poly(Nˉ) physical qudits of depth Tˉ⋅Nˉo(1), which is robust against an adversary who may arbitrarily choose and corrupt an almost-linear number N1−o(1) of physical qudits at each time step. This robustness significantly improves upon prior fault-tolerance theorems, which assumed corruptions were either local and stochastic, or else only act on a polynomially vanishing fraction of qudits.
Our fault-tolerance scheme addresses a key bottleneck towards constructing quantum PCPs via the circuit-to-Hamiltonian mapping of Anshu, Breuckmann, and Nguyen (STOC'24). More fundamentally, our result demonstrates that fault-tolerant quantum computation remains possible under noise models that are global, worst-case, and non-Markovian over the full duration of the computation, directly countering concerns that correlated noise could fundamentally undermine quantum fault tolerance.
Our construction is based on a new family of subsystem product codes we develop, which have large dimension and distance along with low-weight parity-checks, and which support transversal non-Clifford gates. We show how to perform single-shot fault-tolerant error correction on these codes using a Floquet-like procedure based on the local testability of classical tensor codes. We then obtain a universal fault-tolerance scheme using repeated code switching in a hypercubic qudit architecture. Finally, we recursively compose our scheme with itself to reduce an initially exponential qudit dimension down to a constant.
Quantum computation has the potential to solve certain mathematical and physical problems faster than a classical computer. However, one of the key challenges to realizing a quantum computing device is controlling systematic errors and maintaining the coherence of the quantum state. In addition, once a scalable quantum computer is built, we must be able to fault-tolerantly communicate a quantum algorithm to the physical device. In this dissertation, we take several significant steps towards the realization of a quantum computer. We develop a framework for use with any proposed technology to map a quantum algorithm into fault-tolerant machine instructions. Within this framework, we combat errors and decoherence by introducing quantum error correction and fault tolerance into a quantum circuit. We analyze specific fault-tolerant circuitry on two general architectures, nonlocal and nearest-neighbor, to determine failure thresholds of the physical circuit components. These failure thresholds allow physicists to evaluate technology proposals. Our goal is to provide design tools, failure thresholds, and fault-tolerant constructions to combat the faultiness of quantum computation.