Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:quant-ph/0412009 · Physical Review Letters

Protocol for Universal Gates in Optimally Biased Superconducting Qubits

Chad T. Rigetti, Alexandre Blais, Michel Devoret

Published Jun 22, 2005• 115 citations
arXivHTMLPDF

Abstract

We present a new experimental protocol for performing universal gates in a register of superconducting qubits coupled by fixed on-chip linear reactances. The qubits have fixed, detuned Larmor frequencies and can remain, during the entire gate operation, biased at their optimal working point where decoherence due to fluctuations in control parameters is suppressed to first order. Two-qubit gates are performed by simultaneously irradiating two qubits at their respective Larmor frequencies with appropriate amplitude and phase, while one-qubit gates are performed by the usual single-qubit irradiation pulses.

DOI
10.1103/physrevlett.94.240502

Related papers

Fully microwave-tunable universal gates in superconducting qubits with linear couplings and fixed transition frequencies

Chad T. Rigetti, Michel Devoret

A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the ``control'') at the transition frequency of another (the ``target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude $\ensuremath{\Omega}$ to the qubit-qubit detuning $\ensuremath{\Delta}$, as compared with earlier proposals that turn on as ${(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}$.

Physical Review B•Apr 5, 2010•368 citations

Flux control of superconducting qubits at dynamical sweet spots

Nicolas Didier

Scaling up superconducting quantum processors with optimized performance requires a sufficient flexibility in the choice of operating points for single and two qubit gates to maximize their fidelity and cope with imperfections. Flux control is an efficient technique to manipulate the parameters of tunable qubits, in particular to activate entangling gates. At flux sensitive points of operation, the ubiquitous presence of 1/f flux noise however gives rise to dephasing by inducing fluctuations of the qubit frequency. We show how two-tone modulation of the flux bias, a bichromatic modulation, gives rise to a continuum of dynamical sweet spots where dephasing due to slow flux noise is suppressed to first order for a wide range of time-averaged qubit frequencies. The qubits can be operated at these dynamical sweet spots to realize protected entangling gates and to avoid collisions with two-level-system defects.

arXiv:1912.09416•Dec 19, 2019•16 citations

Optimal robust single-qubit gates in superconducting quantum processors

Tangyou Huang, Anuj Aggarwal, Jingjun Zhu +11 more

Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.

quant-pharXiv:2610.24212•Oct 20, 2026•1 citation

Universal Fast-Flux Control of a Coherent, Low-Frequency Qubit

Helin Zhang, Srivatsan Chakram, Tanay Roy +6 more

The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.

•Jan 15, 2021•116 citations

Selective coupling of superconducting charge qubits mediated by a tunable stripline cavity

Margareta Wallquist, Vitaly S. Shumeiko, Goran P. Wendin

We theoretically investigate selective coupling of superconducting charge qubits mediated by a superconducting stripline cavity with a tunable resonance frequency. The frequency control is provided by a flux-biased dc superconducting quantum interference device attached to the cavity. Selective entanglement of the qubit states is achieved by sweeping the cavity frequency through the qubit-cavity resonances. The circuit is able to accommodate several qubits and allows one to keep the qubits at their optimal points with respect to decoherence during the whole operation. We derive an effective quantum Hamiltonian for the basic, two-qubit-cavity system, and analyze appropriate circuit parameters. We present a protocol for performing Bell inequality measurements, and discuss a composite pulse sequence generating a universal control-phase gate.

arXiv:cond-mat/0608209•Physical Review B•Dec 15, 2006•141 citations

Optimal control for fast and high-fidelity quantum gates in coupled superconducting flux qubits

Shang‐Yu Huang, Hsi‐Sheng Goan

We apply the quantum optimal control theory based on the Krotov method to implement single-qubit $X$ and $Z$ gates and two-qubit cnot gates for inductively coupled superconducting flux qubits with fixed qubit transition frequencies and fixed off-diagonal qubit-qubit coupling. Our scheme shares an advantage with other direct-coupling schemes in that it requires no additional coupler subcircuit and control lines. The control lines needed are only for the manipulation of individual qubits (e.g., a time-dependent magnetic flux or field applied on each qubit). The qubits are operated at the optimal coherence points and the gate operation times (less than 1 ns for single-qubit gates and $\ensuremath{\sim}2$ ns for cnotgates) are much shorter than the corresponding qubit decoherence time. A cnot gate or other general quantum gates can be implemented in a single run of the pulse sequence rather than being decomposed into several single-qubit and several entangled two-qubit operations in series by composite pulse sequences. Quantum gates constructed via our scheme are all with very high fidelity (very low error) as our optimal control scheme takes into account the fixed qubit detuning and fixed two-qubit interaction as well as all other time-dependent magnetic-field-induced single-qubit interactions and two-qubit couplings. The effect of leakage to higher-energy-level states and the effect of qubit decoherence on the quantum-gate operations are also discussed.

arXiv:1406.7707•Physical Review A•Jul 14, 2014•35 citations
We present a new experimental protocol for performing universal gates in a register of superconducting qubits coupled by fixed on-chip linear reactances. The qubits have fixed, detuned Larmor frequencies and can remain, during the entire gate operation, biased at their optimal working point where decoherence due to fluctuations in control parameters is suppressed to first order. Two-qubit gates are performed by simultaneously irradiating two qubits at their respective Larmor frequencies with appropriate amplitude and phase, while one-qubit gates are performed by the usual single-qubit irradiation pulses.
A register of quantum bits with fixed transition frequencies and weakly coupled to one another through simple linear circuit elements is an experimentally minimal architecture for a small-scale superconducting quantum information processor. Presently, the known schemes for implementing two-qubit gates in this system require microwave signals having amplitudes and frequencies precisely tuned to meet a resonance condition, leaving only the signal phases as free experimentally adjustable parameters. Here, we report a minimal and robust microwave scheme to generate fast, tunable universal two-qubit gates: simply irradiate one qubit (the ``control'') at the transition frequency of another (the ``target''). The effective coupling between them is then switched on by tuning only the frequency of this single drive tone; the drive amplitude adjusts the effective coupling strength; and the drive phase selects the particular two-qubit gate implemented. This cross-resonance effect turns on linearly with the ratio of the drive amplitude $\ensuremath{\Omega}$ to the qubit-qubit detuning $\ensuremath{\Delta}$, as compared with earlier proposals that turn on as ${(\ensuremath{\Omega}/\ensuremath{\Delta})}^{4}$.
Scaling up superconducting quantum processors with optimized performance requires a sufficient flexibility in the choice of operating points for single and two qubit gates to maximize their fidelity and cope with imperfections. Flux control is an efficient technique to manipulate the parameters of tunable qubits, in particular to activate entangling gates. At flux sensitive points of operation, the ubiquitous presence of 1/f flux noise however gives rise to dephasing by inducing fluctuations of the qubit frequency. We show how two-tone modulation of the flux bias, a bichromatic modulation, gives rise to a continuum of dynamical sweet spots where dephasing due to slow flux noise is suppressed to first order for a wide range of time-averaged qubit frequencies. The qubits can be operated at these dynamical sweet spots to realize protected entangling gates and to avoid collisions with two-level-system defects.
Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.
The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.
We theoretically investigate selective coupling of superconducting charge qubits mediated by a superconducting stripline cavity with a tunable resonance frequency. The frequency control is provided by a flux-biased dc superconducting quantum interference device attached to the cavity. Selective entanglement of the qubit states is achieved by sweeping the cavity frequency through the qubit-cavity resonances. The circuit is able to accommodate several qubits and allows one to keep the qubits at their optimal points with respect to decoherence during the whole operation. We derive an effective quantum Hamiltonian for the basic, two-qubit-cavity system, and analyze appropriate circuit parameters. We present a protocol for performing Bell inequality measurements, and discuss a composite pulse sequence generating a universal control-phase gate.
We apply the quantum optimal control theory based on the Krotov method to implement single-qubit XXX and ZZZ gates and two-qubit cnot gates for inductively coupled superconducting flux qubits with fixed qubit transition frequencies and fixed off-diagonal qubit-qubit coupling. Our scheme shares an advantage with other direct-coupling schemes in that it requires no additional coupler subcircuit and control lines. The control lines needed are only for the manipulation of individual qubits (e.g., a time-dependent magnetic flux or field applied on each qubit). The qubits are operated at the optimal coherence points and the gate operation times (less than 1 ns for single-qubit gates and $\ensuremath{\sim}2$ ns for cnotgates) are much shorter than the corresponding qubit decoherence time. A cnot gate or other general quantum gates can be implemented in a single run of the pulse sequence rather than being decomposed into several single-qubit and several entangled two-qubit operations in series by composite pulse sequences. Quantum gates constructed via our scheme are all with very high fidelity (very low error) as our optimal control scheme takes into account the fixed qubit detuning and fixed two-qubit interaction as well as all other time-dependent magnetic-field-induced single-qubit interactions and two-qubit couplings. The effect of leakage to higher-energy-level states and the effect of qubit decoherence on the quantum-gate operations are also discussed.