Superconducting qubits have in recent years become a promising candidate for the implementation of a quantum computer due to their design flexibility, good protection from decohering elementary excitations, and availability of well developed fabrication and measurement techniques. Superconducting flux qubits, for which the effect of offset charge noise is reduced due to the fact that the Josephson energy dominates over the charging energy, correspond to one of the proposed means of designing a superconducting qubit. A nonlinear dispersive readout scheme of flux qubits involving a DC SQUID magnetometer that avoids the effects of on-chip dissipation can be readily implemented, yielding high contrast output for single qubit readout. Coupling schemes via nonlinear Josephson elements have also been realized. On the other hand, while the means of isolating superconducting qubits from external noise sources has been found, the mechanisms by which they undergo relaxation and decoherence due to intrinsic noise sources in the junctions themselves are not very well understood, and the question of how to deal with these noise sources remains unanswered in the general case. Other questions deal with the problem of experimentally observing entanglement in an array of coupled superconducting qubits, and finding the means by which the existence of entanglement in a typical laboratory setup may to some extent be verified by measurements on a global scale. Following a brief introductory review, we will first investigate the influence of a Two-Level Fluctuator on a DC SQUID driven by a finite current bias. Then we introduce a directly measurable signature of multiqubit entanglement for a large system of qubits and show that it is compatible to a recently introduced measure of global entanglement.
Flux qubits (also known as persistent current qubits), one kind of superconducting tunnel junction circuits, are recently demonstrated as a promising candidate to realize quantum computations.In order to do large-scale quantum information processing, it is necessary to switch on and off the couplings between individual flux qubits in the time-domain while those qubits retain coherence.This report contains two parts: one is to describe my understanding of models, fabrications and measurements for one single flux qubit; the other is to compare two proposed schemes and the corresponding experimental realizations of coherent tunable couplings between flux qubits.
We calculate for the current-biased Josephson junction the decoherence of the qubit state from noise and dissipation. The effect of dissipation can be entirely accounted for through a semiclassical noise model that appropriately includes the effect of zero-point and thermal fluctuations from dissipation. The magnitude and frequency dependence of this dissipation can be fully evaluated with this model to obtain design constraints for small decoherence. We also calculate decoherence from spin echo and Rabi control sequences and show they are much less sensitive to low-frequency noise than for a Ramsey sequence. We predict small decoherence rates from
1/f noise of charge, critical current, and flux based on noise measurements in prior experiments. Our results indicate this system is a good candidate for a solid-state quantum computer.
We compute the decoherence caused by
1∕f fluctuations at low frequency
f in the critical current
I0 of Josephson junctions incorporated into flux, phase, charge, and hybrid flux-charge superconducting quantum bits (qubits). The dephasing time ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ scales as ${I}_{0}∕\ensuremath{\Omega}\ensuremath{\Lambda}{S}_{{I}_{0}}^{1∕2}(1\phantom{\rule{0.3em}{0ex}}\mathrm{Hz})$, where $\ensuremath{\Omega}∕2\ensuremath{\pi}$ is the energy-level splitting frequency,
SI0(1Hz) is the spectral density of the critical-current noise at
1Hz, and $\ensuremath{\Lambda}\ensuremath{\equiv}\ensuremath{\mid}{I}_{0}d\ensuremath{\Omega}∕\ensuremath{\Omega}d{I}_{0}\ensuremath{\mid}$ is a parameter computed for given parameters for each type of qubit that specifies the sensitivity of the level splitting to critical-current fluctuations. Computer simulations show that the envelope of the coherent oscillations of any qubit after time
t scales as $\mathrm{exp}(\ensuremath{-}{t}^{2}∕2{\ensuremath{\tau}}_{\ensuremath{\phi}}^{2})$ when the dephasing due to critical-current noise dominates the dephasing from all sources of dissipation. We compile published results for fluctuations in the critical current of Josephson tunnel junctions fabricated with different technologies and a wide range in
I0 and area
A, and show that their values of
SI0(1Hz) scale to within a factor of 3 of $[144{({I}_{0}∕\ensuremath{\mu}\mathrm{A})}^{2}∕(\mathcal{A}∕\ensuremath{\mu}{\mathrm{m}}^{2})]{(\mathrm{pA})}^{2}∕\mathrm{Hz}$ at
4.2K. We empirically extrapolate
SI01∕2(1Hz) to lower temperatures using a scaling
T(K)∕4.2. Using this result, we find that the predicted values of ${\ensuremath{\tau}}_{\ensuremath{\phi}}$ at
100mK range from $0.8\phantom{\rule{0.5em}{0ex}}\text{to}\phantom{\rule{0.5em}{0ex}}12\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{s}$, and are usually substantially longer than values measured experimentally at lower temperatures.
Quantum annealing is a method to solve optimization problems that leverages quantum tunneling in a coupled qubit system. We present a detailed study of the coherence of a tunable capacitively-shunted flux qubit, designed for coherent quantum annealing applications. We find that for high qubit frequencies, thermal noise in the bias line makes a significant contribution to the relaxation, arising from the design choice to experimentally explore both fast annealing and high-frequency control. The measured dephasing rate is primarily due to intrinsic low-frequency flux noise in the two qubit loops, with additional contribution from the low-frequency noise of control electronics used for fast annealing. Our results characterize decoherence in a realistic setup for quantum annealing and are relevant for ongoing efforts toward building superconducting quantum annealers with increased coherence. Quantum annealers hold promise of outperforming classical computers in solving hard optimization problems, but one main challenge is understanding the role of noise in quantum annealing. Here, the authors characterize the relevant noise sources in a tunable flux qubit, a building block for quantum annealers, and provide a benchmark for future work on highly-coherent quantum annealers.
We present a systematic study of the phase coherent dynamics of a superconducting three-Josephson-junction flux qubit. The qubit state is detected with the integrated-pulse method, which is a variant of the pulsed switching-dc-superconducting quantum interference device (SQUID) method. In this scheme, the dc SQUID bias current pulse is applied via a capacitor instead of a resistor, giving rise to a narrow bandpass instead of a pure low-pass filter configuration of the electromagnetic environment. Measuring one and the same qubit with both setups allows a direct comparison. With the capacitive method about four times faster switching pulses and an increased visibility are achieved. Furthermore, the deliberate engineering of the electromagnetic environment, which minimizes the noise due to the bias circuit, is facilitated. Right at the degeneracy point, the qubit coherence is limited by energy relaxation. We find two main noise contributions. White noise limits the energy relaxation and contributes to the dephasing far from the degeneracy point.
1∕f noise is the dominant source of dephasing in the direct vicinity of the optimal point. The influence of
1∕f noise is also supported by nonrandom beatings in the Ramsey and spin echo decay traces. Numeric simulations of a coupled qubit-oscillator system indicate that these beatings are due to the resonant interaction of the qubit with at least one pointlike fluctuator, coupled especially strongly to the qubit.