The quantum-mechanical and thermodynamic properties of a three-level molecular cooling cycle are derived. An inadequacy of earlier models is rectified in accounting for the spontaneous emission and absorption associated with the coupling to the coherent driving field via an environmental reservoir. This additional coupling need not be dissipative, and can provide a thermal driving force-the quantum analog of classical absorption chillers. The dependence of the maximum attainable cooling rate on temperature, at ultralow temperatures, is determined and shown to respect the recently established fundamental bound based on the second and third laws of thermodynamics.
The quantum-mechanical and thermodynamic properties of a three-level molecular cooling cycle are derived. An inadequacy of earlier models is rectified in accounting for the spontaneous emission and absorption associated with the coupling to the coherent driving field via an environmental reservoir. This additional coupling need not be dissipative, and can provide a thermal driving force-the quantum analog of classical absorption chillers. The dependence of the maximum attainable cooling rate on temperature, at ultralow temperatures, is determined and shown to respect the recently established fundamental bound based on the second and third laws of thermodynamics.
The second and third laws of thermodynamics can be used to establish a fundamental bound for the maximum possible cooling rate in approaching the absolute zero of temperature. In modeling the behavior of the molecular refrigerators geared toward attaining ultralow temperatures, only quantum mechanical, as opposed to classical physics, models can be admissible. As a simple model, we analyze a three-level quantum refrigerator, and in particular its irreversible thermodynamic performance as absolute zero is approached.
The study of nanoscopic thermal devices attracts an increasing attention, not only because of their key role in understanding the emergence of thermodynamics from quantum theory, but also for the potential use of quantum-mechanical thermal cycles, especially refrigerators, in quantum technologies. This thesis, is devoted to the performance optimization of autonomous (heat-driven) refrigerators. For a quantum refrigerator, one has a full microscopic description of the simple system serving as a working medium, and of its interaction with the external heat baths. This enables a consistent `finite-time? thermodynamic analysis, not relying on any phenomenological assumptions about the leading sources of irreversibility, and allows to establish arguably general performance bounds, essential to benchmark the operation of realistic devices. In particular, tight and model-independent upper bounds for the coefficient of performance at maximum power, are derived here for a class of strongly coupled refrigerators, and seen to hold more generally for other types of heat and power-driven cycles. Remarkably, these ultimate limitations only depend on the particulars of the system-baths interaction at the interface with the object to be cooled. Strategies might be then defined so as to saturate those limits: It is shown how the working medium of the refrigerator may be, for instance, scaled up into a parallel multi-stage configuration, resembling that of macroscopic multi-effect absorption chillers, as a means to increase its cooling power. Similarly, by applying reservoir engineering techniques on selected transitions between the energy states of the working medium, one can mimic exploitable non-equilibrium fluctuations in the baths, capable of boosting the overall power and COP beyond what would be otherwise allowed by the second law of thermodynamics. In this way, heat-driven chillers could be set to compete on a equal footing with the best power-driven refrigerators.
The rate of temperature decrease of a cooled quantum bath is studied as its temperature is reduced to absolute zero. The third law of thermodynamics is then quantified dynamically by evaluating the characteristic exponent ζ of the cooling process dT(t)/dt∼-T^{ζ} when approaching absolute zero, T→0. A continuous model of a quantum refrigerator is employed consisting of a working medium composed either by two coupled harmonic oscillators or two coupled two-level systems. The refrigerator is a nonlinear device merging three currents from three heat baths: a cold bath to be cooled, a hot bath as an entropy sink, and a driving bath which is the source of cooling power. A heat-driven refrigerator (absorption refrigerator) is compared to a power-driven refrigerator. When optimized, both cases lead to the same exponent ζ, showing a lack of dependence on the form of the working medium and the characteristics of the drivers. The characteristic exponent is therefore determined by the properties of the cold reservoir and its interaction with the system. Two generic heat bath models are considered: a bath composed of harmonic oscillators and a bath composed of ideal Bose/Fermi gas. The restrictions on the interaction Hamiltonian imposed by the third law are discussed. In the Appendices, the theory of periodically driven open systems and its implication for thermodynamics are outlined.
A quantum absorption refrigerator driven by noise is studied with the purpose of determining the limitations of cooling to absolute zero. The model consists of a working medium coupled simultaneously to hot, cold, and noise baths. Explicit expressions for the cooling power are obtained for Gaussian and Poisson white noise. The quantum model is consistent with the first and second laws of thermodynamics. The third law is quantified; the cooling power J(c) vanishes as J(c) ∝ T(c)(α), when T(c)→0, where α=d+1 for dissipation by emission and absorption of quanta described by a linear coupling to a thermal bosonic field, where d is the dimension of the bath.
Quantum thermodynamics supplies a consistent description of quantum heat engines and refrigerators up to a single few-level system coupled to the environment. Once the environment is split into three (a hot, cold, and work reservoir), a heat engine can operate. The device converts the positive gain into power, with the gain obtained from population inversion between the components of the device. Reversing the operation transforms the device into a quantum refrigerator. The quantum tricycle, a device connected by three external leads to three heat reservoirs, is used as a template for engines and refrigerators. The equation of motion for the heat currents and power can be derived from first principles. Only a global description of the coupling of the device to the reservoirs is consistent with the first and second laws of thermodynamics. Optimization of the devices leads to a balanced set of parameters in which the couplings to the three reservoirs are of the same order and the external driving field is in resonance. When analyzing refrigerators, one needs to devote special attention to a dynamical version of the third law of thermodynamics. Bounds on the rate of cooling when Tc→0 are obtained by optimizing the cooling current. All refrigerators as Tc→0 show universal behavior. The dynamical version of the third law imposes restrictions on the scaling as Tc→0 of the relaxation rate γc and heat capacity cV of the cold bath.
Cooling of internal atomic and molecular states via optical pumping and laser cooling of the atomic velocity distribution, rely on spontaneous emission. The outstanding success of such examples, taken together with general arguments, has led to the widely held notion that radiative cooling requires spontaneous emission. We here show by specific examples and direct calculation, based primarily on breaking emission-absorption symmetry as in lasing without inversion, that cooling of internal states by external coherent control fields is possible. We also show that such coherent schemes allow us to practically reach absolute zero in a finite number of steps, in contrast to some statements of the third law of thermodynamics.